Snapshot-Linux x64 v0.7


Recommended Posts

@BetaguyGZT

 

Yes you are right about the GTK+ / KDE issues. On the one hand it's pretty annoying and i hate to give such an answer (because i think linux should be about 100% compatibility) but when using a KDE based distro you might be better off with using QT4/5 based programs, as for browser i would give qupzilla a try, it integrates very well into KDE gui and is much more up 2 date compared to rekonq or konqueror.

 

And for the other things like fonts, etc. feel free to configure it the way you want :)

KDE offers endless options to have it your way.

My only two other complaints (if they can be called that) would be is when we create our own user account the setup from the default one (the nicely tweaked one) does NOT carry over, and we end up with pretty much raw Kubuntu 14.04. The menu entries lack all of the installed applications that are present on the default account.

 

If I recall correctly there's a way to automate default settings, themes and so on per user as the accounts are created but I can't remember how that's done offhand. Getting late and I can't be bothered to check tonight. ;)

 

The other is better handling of newer/updated Proprietary drivers. The way Linux in general approaches this is dumb. Please consider adding the X-Org Edgers PPA by default, since they do most of the work on the closed-source drivers now and I've never had an issue with any driver I've used from them ever. Let the user decide whether to install the driver or not. I simply add the PPA after updating the system, but it would certainly save a step. ;)

My only two other complaints (if they can be called that) would be is when we create our own user account the setup from the default one (the nicely tweaked one) does NOT carry over, and we end up with pretty much raw Kubuntu 14.04. The menu entries lack all of the installed applications that are present on the default account.

 

If I recall correctly there's a way to automate default settings, themes and so on per user as the accounts are created but I can't remember how that's done offhand. Getting late and I can't be bothered to check tonight. ;)

 

The other is better handling of newer/updated Proprietary drivers. The way Linux in general approaches this is dumb. Please consider adding the X-Org Edgers PPA by default, since they do most of the work on the closed-source drivers now and I've never had an issue with any driver I've used from them ever. Let the user decide whether to install the driver or not. I simply add the PPA after updating the system, but it would certainly save a step. ;)

 

you are right. due to limitations of the imager the default user account will be always default with pw default.

 

However there are a few ways to change/add users; to keep it simple i would go for command line like in this example:

https://help.ubuntu.com/community/AddUsersHowto

 

usermod should be installed by default (here it is):

open Konsole and type

man usermod

 

X-Org Edgers PPA

 

good idea, just wrote it on my to do sheet for v. 0.7.

only been a nvidia user since 2 weeks but using the edgers ppa myself.

about the add of the ppa i have no problem with it. see the list, you see a LOT of usefull ppas added already. but: i am sceptical about activating all by default. so i will add it and it can be actiavted with just one single click in the "sources" on muon or synaptic.

  • Like 1

It has Plasma 5 KDE ?

 

Just read the description ;)

 

jfyi: no kde plasma next yet, as i don't see it stable ennough for daily usage, so it has the latest kde4 + a graphical transitional package bringing the users closer to the kde plasma next look.

as soon as plasma next is stable and complete i will migrate to ...

Just read the description ;)

 

jfyi: no kde plasma next yet, as i don't see it stable ennough for daily usage, so it has the latest kde4 + a graphical transitional package bringing the users closer to the kde plasma next look.

as soon as plasma next is stable and complete i will migrate to ...

 

How about latest GNOME ? [ instead of KDE , of course ] ?

Thanks Jack. You won't regret using Nvidia, the Linux support has always been top-shelf with their hardware. :yes: And I agree, enable the PPA, but have the user choose whether to install or not.

 

@ MikeM97: It's KDE 4 currently, as it is based on Kubuntu 14.04.2. KDE/Plasma 5 is being rolled out in Kubuntu 15.04, and I have played around with it, and it's pretty decent but the Kubuntu people are still getting it stable. At this stage it's still rather fragile. My experience over the week that I used it was:

 

- It's pretty! *crash* awww ... well, at least it's pretty.

- (2 hours later) Hey, they fixed something ... hey, this works now. Let's see what this does ... *crash* ... darnit! Well, it's still pretty!

- (1 hour later) More updates? Nice! Oh, cool, they fixed that, that and that! *reboot* Okay, let's see what ... *lockup* ... hmm.

- (4 hours later) Maybe they fixed it by now ... *lockup #2* ... at least I can get to Konsole, let's see if they know they broke the Panel ... ahh good. *update*

 

That's how it was for the first two days. :yes: KDE/Plasma 5 is great, once it's stabilized.

Thanks Jack. You won't regret using Nvidia, the Linux support has always been top-shelf with their hardware. :yes: And I agree, enable the PPA, but have the user choose whether to install or not.

 

@ MikeM97: It's KDE 4 currently, as it is based on Kubuntu 14.04.2. KDE/Plasma 5 is being rolled out in Kubuntu 15.04, and I have played around with it, and it's pretty decent but the Kubuntu people are still getting it stable. At this stage it's still rather fragile. My experience over the week that I used it was:

 

- It's pretty! *crash* awww ... well, at least it's pretty.

- (2 hours later) Hey, they fixed something ... hey, this works now. Let's see what this does ... *crash* ... darnit! Well, it's still pretty!

- (1 hour later) More updates? Nice! Oh, cool, they fixed that, that and that! *reboot* Okay, let's see what ... *lockup* ... hmm.

- (4 hours later) Maybe they fixed it by now ... *lockup #2* ... at least I can get to Konsole, let's see if they know they broke the Panel ... ahh good. *update*

 

That's how it was for the first two days. :yes: KDE/Plasma 5 is great, once it's stabilized.

 

Thank you ... When it will be fully stablilized ?

Release is in April, so they should have all major problems fixed soon. The remaining outstanding bugs that would prevent a Release Candidate from shipping will be addressed within two to three weeks, so I would expect the first week of April is a good timeframe for stability.

Are you talking about the floating toolbar with the icon in it? I always just exit toolbar and it goes away.

 

[EDIT] Looks like you mean the 'Battery Charging' icon in the System Tray. That shouldn't be there unless you are on a Laptop/Portable, otherwise it is hidden with the rest of the unneeded icons. Not much to be done about that one. You could always right-click the tray area, then go to options, and see if you can hide it yourself.

Ah okay. You can move it around the Desktop, but as far as getting rid of it, I've never found out how. If you do, please pass the information along -- I'd be interested to know. :yes:

 

Me too , that's why I asked you . :laugh:

P.S : If you haven't done it before , how do you know it can be moved all around the Desktop ?

 

if you mean this one, afaik it can't be removed by default KDE options as it would basically brake the whole system settings application. try it out: open system-settings and open one link in there. if you then wanna go back to systemsettings you can use the "back" button.

No problem, Mike. Sorry the help wasn't more useful on my side of things. It's been a while (the 3.5.x series) since I seriously used KDE, so I'm still getting used to how the late-game 4.x does things.

 

Having used 5.2 recently, I must say the 5.x series simplifies and improves lot of stuff, so I'm looking forward to seeing how Snapshot's implementation works out. :)

If it continue in this way I'll use Cinnamon .

 

 

Just give the KDE devs some more time. They are definitely on the right track with plasma next and from most screenshots i posted you can see it's a very ambitious project  (not only about new icons and wallpapers), the GUI will be a big overhaul from kde 4.x.

if i remember right, with kde 4.x the first really usable was 4.9 or so? could be the same with plasma next.

 

btw: debates about kde plasma next should better go into the kde plasma next thread. this one is just about snapshot-linux which has no influence on KDE plasma work.

  • Like 1

Just give the KDE devs some more time. They are definitely on the right track with plasma next and from most screenshots i posted you can see it's a very ambitious project  (not only about new icons and wallpapers), the GUI will be a big overhaul from kde 4.x.

if i remember right, with kde 4.x the first really usable was 4.9 or so? could be the same with plasma next.

 

btw: debates about kde plasma next should better go into the kde plasma next thread. this one is just about snapshot-linux which has no influence on KDE plasma work.

 

Sure .

How about the v. 07 on Snapshot-Linux ?

Ditto the "give it time" sentiment.  The official releases tend to be pretty buggy at first but get stable after a while, KDE 4 wasn't all sunshine and rainbows either at first, was a lot of "screw this, staying with KDE 3" sentiment at the beginning.. been a while but if I recall KDE 3 had the same growing pains too.  Took a while to get to where it was good enough for daily use.. but when it does it's worth it.  

  • Like 1

Agreed. It's quite good from a technological standpoint, and the cleanup work they've done to is worth mentioning on it's own -- it's just not ready yet is all.

 

No problem. They'll have it ready before the end of the year is my guess.

breaking_news_alert_graphic_new_as_of_3_

 

Snapshot-Linux x64 1149   .7    to be released next week!

What's new:
- New version number  .7 instead of 0.7
- Progressbar and color when doing apt-get in Konsole
- Fully updated and new ppa's
- Better way to initiate Homerun
- KDE Admin
- SSM (SuperSilentMode): No details for now 
- Up to 5 times faster apt-get mode

See you next week 
  • Like 1
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft admits one of the most crucial Outlook features is currently broken by Sayan Sen Microsoft is making some decent progress when it comes to Windows 11. Recently we have confirmed reports of some rather useful improvements landing in the next version of the OS, 26H2, wherein GPU driver TDR crashes may finally be fixed, plus the company is also allowing users to disable web content on the Search. On the Outlook front though things have not been so rosy. Last month in May we reported several problems affecting basic functionalities on the app. These included a problem where documents would open blank or corrupt themselves. Following that, Quick Steps, a very useful feature, would no longer work correctly, and finally, Microsoft acknowledged a problem wherein images would fail to load up properly inside the email. Microsoft had resolved those bugs later and almost exactly a month after we reported on them, the company has now admitted a new similarly basic issue, this time on Macs. Users recently started noticing that Outlook would no longer display email threads properly as the original message itself was not displayed. An affected user Tsoumpas, C (ngmb) nicely described the problem in a forum post they made on Microsoft's site. They wrote: "Description of the issue: After updating Outlook for Mac [Version 16.110 (26061317)] on 18/6/2026, replying to any email no longer includes the original message in the reply window. Prior to the update, replies correctly contained the original email text below my response. Expected behavior: The original message should be included in the reply, as in previous Outlook versions and according to the configured reply settings. Actual behavior: The reply window contains only a blank composition area (or only my response), with none of the original email text included." Obviously this must be a highly frustrating for users as noted by several in that thread. The post, at the time of writing, has also been upvoted by more than 40 users indicating that is a fairly widespread bug. Thankfully Microsoft seems to have acknowledged the problem right around that time as it opened a new issue on its official website. In the support article, the company recommends switching to Outlook for Mac from the legacy app, where the problem appears to be happening.
    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!