Recommended Posts

Ma Kettle is an arthritic senior Lab who walked 30 miles to try to get home -- only to be rejected by her former family once she arrived.

The dog had seen a country song's amount of sadness already. Ma Kettle's previous owner -- who called her Lady -- died in 2012, leaving her homeless. She was adopted out of the Chautauqua County Animal Shelter, in Kansas, but then given away again for not getting along with a new puppy.

She escaped her third home, and walked back to the family with the puppy, but the journey ended with her being sent back to the shelter -- and then this heartbreaking Facebook post:

ADOPTED!!! ADOPTED!!!!! ADOPTED!!!!

This is Ma Kettle, the name this dog was given when she arrived at the shelter during the fall of 2012. Her owner had died and no one wanted her.

Her life has since become a fairy tale. Ma Kettle's story went viral, catching the attention of an animal-loving heiress -- who has now whisked the dog off in a private plane to Odessa, Florida -- about half an hour from Tampa -- where she'll live in an 11,000 square foot home on 100-odd acres, with a whole menagerie of furry rescue companions.

The doggie's name is now Lady again, and her new owner is Helen Rosburg, also known as the author Helen Rich, a tattooed, art-collecting legatee to the Wrigley chewing gum fortune, and who according to TBO.com dispatched an assistant to collect the pup:

    The story resonated online and with Rosburg, who had recently lost her senior black Labrador, Granny, said her assistant, Barbara DiCioccio.

    Rosburg, 65, contacted her staff to rescue the dog from the Chautauqua County Animal Shelter in Sedan, Kansas. At 4 p.m. Thursday, her assistants Chet Ragsdale and Barbara DiCioccio boarded a jet to Kansas to pick up the dog; they returned about 10 p.m.

    ?We don?t mess around here,? DiCioccio said. ?We get things done.? :happy:

 

10433894_707312849316894_322792247939819

more

This topic is now closed to further replies.
  • Posts

    • My father still uses a programme written in dbase3. Still manages to work with a little help from dosbox. 
    • Microsoft hides these secret Windows 11 performance boost settings available on every PC by Sayan Sen Windows enthusiasts often look for ways to extract as much performance out of their systems as possible, and it's often the case that they try and do so while trying to minimize the heat and power consumption. This is especially relevant in the case of mobile Windows PCs since laptops and notebooks tend to get hot and management of that heat and power is harder in such a form factor. As such users often turn to techniques like under-volting which can be used to squeeze out the maximum capabilities of a chip while also maintaining lowered power levels. There are official apps from AMD and Intel with the likes of Ryzen Master and XTU (Extreme Tuning Utility). While these are quite handy, most enthusiasts probably prefer to dig into the BIOS and play around with settings there like Curve Optimizer on Ryzen, which lets users set various frequency-voltage scaling values. These are essentially called P-States. If you are not familiar with them, Processor Power Management is done through Advanced Configuration and Power Interface (ACPI) P-states and C-states. While P-states or performance pwoer states handle CPU voltage-frequency scaling, C-states deal with CPU sleep states so that some of the CPU functions, which are not necessary at that moment, can be disabled. The P-states and C-states work together to make the processor run more efficiently. It helps the OS and apps determine which cores can be parked and which should be boosted. Of course not every user is an enthusiast or knows the technicalities and integrities of how things like overclocking or undervolting work. Thankfully for them Windows itself offers something pretty cool, though it is hidden by default on all systems. By default, Windows only has two P-States, "Minimum Processor State" and "Maximum Processor State." However, this can be changed with a Registry trick to expand the options under a secret "Processor performance boost mode" dropdown. This essentially enables the HWP or hardware P-States available on a device, and these are not controlled just by the OS itself as the underlying hardware gets involved too. In total there are five Processor Performance Boost Mode profiles that control how Windows requests and allows CPU turbo/boost behavior under the different power policies. They are: Disabled: In this mode, processor boosting is effectively turned off. The CPU will avoid entering turbo or boost frequencies and instead operate closer to its base frequency ceiling. This can significantly reduce power consumption and heat output, but at the cost of reduced burst performance and responsiveness in short workloads. Enabled: This is the standard behavior where boost functionality is allowed under normal conditions. The processor can opportunistically increase frequency when workload demands it, balancing performance gains with power and thermal constraints as managed by the system. Aggressive: Aggressive mode favors performance more heavily, allowing the CPU to enter higher boost states more readily and sustain them longer. This should in theory improve responsiveness under bursty or heavy workloads but increases power draw and thermal output compared to the default enabled behavior. Efficient Enabled: This mode still allows boosting, but with a stronger bias toward energy efficiency. The system attempts to use boost more selectively, avoiding unnecessary frequency spikes when the performance gain is marginal. Efficient Aggressive: This is a hybrid approach where boost is still performance-responsive, but the system continuously weighs efficiency more heavily than in Aggressive mode. It aims to deliver noticeable performance improvements while reducing wasted power in less demanding scenarios. Here's how to enable the Processor performance boost mode: Open Registry Editor: Press Win+R, type regedit, and click OK. Go to: HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00\be337238-0d82-4146-a960-4f3749d470c7 (where HKLM stands for HKEY_LOCAL_MACHINE_) Modify the value of Attributes from 1 to 2 (you can find modify option by right-clicking) After that, exit Registry, you should now be able to see the new "Processor performance boost mode" dropdown menu: As you can see there are now five new P-States or CPPC states or power profile available that help define the boost mode processor setting on your PC. Wrapping it up here's a quick run-down of the settings as defined by Microsoft itself. Setting Description Disabled The corresponding P-state-based behaviour is disabled. Collaborative Processor Performance Control (CPPC) behaviour is disabled. Enabled The corresponding P-state-based behaviour is enabled. CPPC behaviour is Efficient Enabled. Aggressive The corresponding P-state-based behaviour is enabled. CPPC behaviour is Aggressive. Efficient Enabled The corresponding P-state-based behaviour is Efficient. CPPC behaviour is Efficient Enabled. Efficient Aggressive The corresponding P-state-based behaviour is Efficient. CPPC behaviour is Aggressive. Aggressive At Guaranteed Windows calculates the desired extra performance above the guaranteed performance level, and asks the processor to deliver that specific performance level. Efficient Aggressive At Guaranteed Windows always asks the processor to deliver the highest possible performance above the guaranteed performance level. In the next part we shall be comparing these settings to explore how much of a benefit or regression they can provide in terms of performance and power efficiency. If you decide to change the values on your system and are experiencing problems like crashes or an overheating PC, make sure to revert the steps back to the original state.
    • I think he means you haven't reviewed previous UFC games. Of course it doesn't matter... Every time you just report on something that involves the President even if just simply what happened you guys usually get accused of being anti-Trump. We live in fun times.
  • Recent Achievements

    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      93
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!