Recommended Posts

I wonder what sort of procedure they have for removing the side booster nose cones from the interstage, they usually place that cap on it that locks itself to the stage after which they can lift it... but i suppose now they need some guys in a cherrypicker going up to unlock that nosecone first.

  • 2 weeks later...
2 minutes ago, DocM said:

That's not a booster, it's the new beefed up center core.

 

 It's rumored at least one FH booster will be a previouslycflown stage. 

I was going to say. Is it wider than a normal core?

  • Like 1

Thicker hull, massively beefed up Octaweb to take the loads, Octaweb mounts & longerons for the lower ends of the boosters, and a new beefed up "Sport" interstage with upper mounts for the boosters. 

  • Like 3

Nothing official, but gathered from tweets and recent articles...

 

1) Appears 39A was scheduled to be ready in November 2016, just not for FH, F9 could launch though.

 

2) FH requires new tracking systems for multicore landings, ordered from Orbital Systems, to be received on January 1, 2017 and will be installed then. This would conclude that FH would not have been able to launch in November 2016. Presently only have one tracking antenna at the cape, two more coming in so that all 3 stages can RTLS. (SpaceX payed for the gear)

 

3) Rumor of a "previously enjoyed" booster to be used on initial flight. No idea of the accuracy, but S1 has been proven to be the toughest stage ever built...unless someone has landed and tested one as much....(crickets)...

 

4) Have not heard anything on the construction at LZ-1 for the additional core landings.

 

5) Rumor has it that the damage at LC-40 is "moderate"...which I take as being a lot better than "nuked".

 

Anyone have anything else?

 

Thought this was a good article...will bring a reality smile

 

Why Exploding Rockets Are Not Always a Bad Thing

http://www.space.com/34051-exploding-rockets-arent-always-bad.html?utm_source=Twitter&utm_medium=Twitter&utm_campaign=socialtwitterspc&cmpid=social_spc_514648

 

:)

  • Like 2
  • 4 months later...

Going back to the cross feed system, or lack of it. I know it was talked about nearly a year ago. But I heard it mentioned somewhere fairly recently and was curious how they would manage the fuel in the centre booster. I presume they cant run all 3 at full power or all 3 will run out of propellant at the same time so will the centre booster be throttled back while the side boosters are in action then have it's power increased as those boosters prepare to and do detach?

With the cross feed system I think the idea was to run all three cores at full throttle but feed fuel from the outer cores to the inner core, so at the time the outer cores separate the inner core would still have lots of fuel.
With that plan dropped I'm not entirely sure how they will do it, I think it depends on the mission. They could drop the two boosters early with enough fuel to return and let the middle one burn for longer and land it on a barge. But like I said, that would probably depend on the mission, whenever it is possible to send the three boosters back that would probably be the cheapest solution.

I think they'll do it the "Delta-IV" way. Center Core will be in a partial-thrust mode until a bit after the two Side Cores separate, then it's a "Full Thrust" mode (see what I did there? :D) until it's spent and staging occurs. No reason to abandon what works. :p 

16 minutes ago, DocM said:

And we need to remember that 100% on that center core will be the Block 5 thrust of 1.9 million lbf.  Early FH's will likely use the Block 4 for a few launches for reuse testing.

Sweet, we'll get to see the performance of a Block-IV for a few launches. :yes: Even if it's on a FH, it'll fly. Works for me.

  • 2 weeks later...

HEADS UP!!

 

A Falcon Heavy side booster left Hawthorne last night!! Obvious because it had a nose cone in place of the interstage, and the front dolley wheels were repositioned.

 

 

I said a rude word as I was watching that video the first time haha

 

"Ok there's the engines....then the stage....still normal stage...NOSE CONE OMFG!"

Soon, Daniel-san ... soon.

 

Show me wash car. Hei. Show, wax-on, wax off ... hei. Show, paint the fence ... yosh'. Now show sand the floor ... hei. 

 

*Bow* You ready now. :D

  • Like 2
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Mac does nothing of the sort. You can change the default browser very easily it does not nag you and when you do this, it does not open something still in Safari....like Windows does with Edge.
    • I do not remember anything happening to Apple and Google for bribing people not to make Apps for Windows Phone. Edge barley has a foot print to matter. If the other browser companies want more of the Pie, they need to do better. I use Brave on all my personal device. However in industry, Edge of default, as we can manage it easier with MS tools.
    • On the one hand, it shouldn't be difficult. You buy a computer, you decide what OS you want, which browser etc. Simple enough. But that's the techie side of things. My sister, my mother, wouldn't bother with such a thought. And I'm pretty sure that if you presented a window asking them what to pick they would say, "I don't care! I just want to access my Email!"
    • CPU-Z 2.20.2 by Razvan Serea CPU-Z is a freeware utility that gathers information on some of the main devices of your system. CPU-Z does not need to be installed, just unzip the files in a directory and run the .exe. In order to remove the program, just delete the files. The program does not copy any file in any Windows directory, nor write to the registry. CPU Name and number. Core stepping and process. Package. Core voltage. Internal and external clocks, clock multiplier. Supported instructions sets. All cache levels (location, size, speed, technology). Mainboard Vendor, model and revision. BIOS model and date. Chipset (northbridge and southbridge) and sensor. Graphic interface. Memory Frequency and timings. Module(s) specification using SPD (Serial Presence Detect) : vendor, serial number, timings table. System Windows and DirectX version. CPU-Z 2.20.2 changelog: Intel Arc G3 and G3 Extreme (Panther Lake)(2.20.2). AMD Ryzen 7 7700X3D (Raphael) (2.20.1). AMD Ryzen AI Max+ 495, 492, 488 (Gorgon Halo). AMD Ryzen AI Max 490, 485 (Gorgon Halo). AMD Ryzen AI Max PRO 495, 490, 485, 480 (Gorgon Halo). AMD Ryzen 9 9950X3D2 (Granite Ridge). AMD Ryzen 9 PRO 9965X3D, PRO 9945 (Granite Ridge). AMD Ryzen 7 PRO 9755, PRO 9745 (Granite Ridge). AMD Ryzen 5 PRO 9645 (Granite Ridge). AMD Ryzen AI 7/PRO 450G/GE (Gorgon Point 2). AMD Ryzen AI 5/PRO 440G/GE (Gorgon Point 2). AMD Ryzen AI 5/PRO 435G/GE (Gorgon Point 3). AMD Ryzen AI Max+ 392 (Strix Halo). Intel Core Ultra 5 250KF Plus (Arrow Lake Refresh). Intel Core 7 360 and 350 (Wildcat Lake). Intel Core 5 330, 320 and 315 (Wildcat Lake). Intel Core 3 304 (Wildcat Lake). Intel Core 9 273PQE, 273PTE, 273PE (Bartlett Lake). Intel Core 7 253PQE, 253PTE, 253PE, 251TE, 251E (Bartlett Lake). Intel Core 5 223PQE, 223PTE, 223PE, 221TE, 221E, 213PTE, 213PE, 211TE, 211E (Bartlett Lake). Intel Core 3 201TE, 201E (Bartlett Lake). Intel Arc Pro B70 and B65 (BMG-G31). Intel Arc Pro B60 and B50 (BMG-G21). Support of HUDIMM and HSODIMM memory modules. Download: CPU-Z 2.20.2 | Portable ~5.0 MB (Freeware) View: CPU-Z Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Conversation Starter
      mobandz earned a badge
      Conversation Starter
    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
    • One Year In
      MadMung0 earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      469
    2. 2
      PsYcHoKiLLa
      246
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      75
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!