Recommended Posts

Dragon V2 Parachute/Propulsive Landing Test: September 2015

(parachutes to ~10 meters, SuperDraco propulsive touchdown. One of 4 possible landing modes)

Dragon V2 Demo Mission 1: 30 day ISS un-crewed mission, NET December 2016

Dragon V2 Demo Mission 2: 14 day ISS crewed mission, NET April 2017

SpaceX Dragon V2 CCtCap milestones (PDF)....

The Boeing CST-100 milestones have not been released yet.

  • 2 weeks later...

Boeing's Commercial Crew flight test dates to ISS are finally in, so here's how both schedules play out,

SpX: SpaceX Dragon 2

Boe: Boeing CST-100

Dragon 1: SpaceX Cargo Dragon

SpX-DM1: December 2016, 30 day uncrewed

Boe-OFT: April 2017, 30 day uncrewed

SpX-DM2: April 2017, 14 day crewed

Boe-CFT: July 2017, 14 day crewed

As it stands now SpX-DM2 would overlap the Dragon 1 CRS-14 ISS resupply mission, so there could be 2 Dragons at ISS simultaneously.

It's even possible SpX-DM2 (Dragon 2), CRS-14 (Dragon 1) and Boe-OFT (CST-100) could all be at ISS at the same time. Talk about a photo-op!!

And yes, SpaceX's schedule is currently months ahead of Boeing's.

  • Like 1
  • 10 months later...

I don't know if this is the proper thread Doc, but I thought this comparison of 2016 tasks may be interesting...

 

Eve of Launch: 2016 Goals Vital to Commercial Crew Success

 

https://www.nasa.gov/feature/eve-of-launch-2016-goals-vital-to-commercial-crew-success

 

The article has a few bits of info....

 

:)

ShevBottom line: 

 

SpaceX is building 3 flight Crew Dragons, one scheduled to fly to ISS in December,  while Boeing is building a Starliner structural and qualification test article.

 

Also; SpaceX has begun the DragonFly propulsive landing test program at their McGregor, Texas test center using the pad abort test vehicle. She be hoppin'.

Edited by DocM
  • Like 1

Both spacecraft have a Lifeboat Mode. They can remain attached to ISS for months as a way to bug out, but  there's no guarantee surviving crew members will be a pilot or capable of flying due to injury. They can dive in, close the hatch, hit the arming and lifeboat buttons and the spacecraft will un-dock, scoot away and go home to a series of programmed landing sites on its own. Primaries: White Sands, Houston Spaceport at Ellington, or KSC. If a pilot decides to take over after the bug out he can.

 

SpaceX's head of vehicle landing techs used to work for NASA and was co-developer of their G-FOLD precision lander landing software. His code is one reason why F9 can land within 1-2 meters of a GPS target, and Crew Dragon gets it too. This is why Musk talks of propulsively  landing one on a helipad. Otherwise: parachutes to land or water with a propulsive assisted touchdown, like Soyuz.

 

Starliners parachutes and air bags system doesnt allow such accuracy, so their primary is White Sands or water. No backup landing system. 

Edited by DocM
  • Like 2
  • 1 month later...

HOUSTON (NASA PR)  Suni Williams is one of four astronauts selected to train closely with Boeing and SpaceX as they develop a new generation of human-rated space systems in partnership with NASAs Commercial Crew Program.

 

Williams, Bob Behnken, Eric Boe and Doug Hurley will spend considerable time working with the new spacecraft development teams prior to piloted flight tests.

 

Williams talked recently about some of the expectations of the Commercial Crew Program, which is working with Boeing and SpaceX on their CST-100 Starliner and Crew Dragon systems, respectively, in a unique way focused on safety, reliability and cost-effectiveness.
A veteran of two long-duration missions to the International Space Station, Williams also talked about some of the things that make her career enjoyable and what it takes to become an astronaut.

 

What will make commercial crew a success?

 

Williams: Were heading down this exciting path of commercial crew. Its going to be successful and put to the test when we launch from Kennedy Space Center. Both companies, Boeing and SpaceX, are working hard already, starting to bend metal and actually make spacecraft. Im excited to be part of the first couple of people who will probably fly one of these spacecraft so already weve started down the path. I think the test will be when we put those spacecraft on the launch pad and are ready to light them off and send them to the space station.

 

What excites you about the commercial crew approach to spacecraft development?

 

Williams: We have the opportunity as the commercial crew cadre to go to both Boeing and SpaceX and check out what they're doing and how they're coming along with their spacecraft. I think what's really exciting is seeing the new technologies that they're incorporating into their spacecraft. These are things that are much different from both space shuttle and Soyuz, because they're taking advantage of the technology from the last two decades or so. Some of the ideas are brand new, it makes us think out of the box from how we've done spacecraft and how we've flown spacecraft before. So I'm pretty excited to see these new technologies be incorporated into these new spacecraft.

 

Why use test pilots for the first commercial crew missions?

 

Williams: This will be the first time in a generation that we are going to launch a new [human-rated] spacecraft. I think what goes hand-in-hand with putting the right people on the first couple of missions to really shake out the spacecraft and make sure that theyll be ready to fly for the next generation of folks who are going to be flying these for quite some time. Part of that is putting test pilots on the first couple missions. As part of the test pilot curriculum, we learn a lot about the rigors and the methodology of testing in a very stepwise fashion, looking to approach the boundaries step by step and not jumping out too fast too quickly and exceeding any boundaries of the vehicle or the human in the loop.

 

I think part of the methodology of selecting test pilots for the first couple flights is based on the rigors that we learned in test pilot school. So to look at these spacecraft in a wide variety of aspects and really go down the path and make sure theyre really good for the next generation.

 

Will only test pilots be able to fly these spacecraft?

 

Williams: After the first couple missions of each spacecraft, I dont think were going to have to have test pilots as the prime operator of either of the commercial crew vehicles. I think the idea is to make sure all of the bugs are worked out as much as possible and be able to turn those spacecraft over to anybody in the astronaut office to be able to fly.

 

The commercial crew missions will allow astronauts twice as much time for research. 

 

Describe conducting experiments on the International Space Station.

 

Williams: Conducting research on the space station is very interesting and sometimes challenging. Its a whole different kind of laboratory than here on the ground. Of course, were doing similar experiments than we do on the ground but we have to do them in space which means theres different processes, different materials, theres different considerations  things float around  so you have to be a little bit worried how youre actually putting the experiment together. Sometimes they take a little bit longer, sometimes theyre just observational experiments where we set up and then we make observations just using the background of microgravity to see how it affects the experiment. But its challenging, so one more crewmember up on the space station helping out is going to probably double the amount of space research that were doing right now.

 

What do you take with you when you go to space?

 

Williams: So Ive been to space two times and I always like to take something that reminds me of home. My first mission I wasnt sure how much stuff I could take or what I could take, you know its always the first time, so I took a little paper cutout of my dog and I had him inside of my crew notebook. My second time I knew a little more about how much space I had so I had a little stuffed animal of him, so I got to have him inside my sleep station and slept with him every night.

 

For the next mission, I dont know, I dont think I can take anything bigger than the stuffed animal I already had so I might have to get one more stuffed animal. I actually left my little stuffed guy up there with one of my crewmates who was staying on the space station so this time if I take a stuffed Gorby I think I might have to bring him back home with me.

 

What does it mean to work at NASA and be an astronaut?

 

Williams: Working for NASA and being an astronaut is really exciting, and its fun first and foremost. I have never felt like I have a job. I go to work every day and its something new and exciting and sometimes it means actually getting on a rocket and going to space. There are a lot of cool things we do and its not only just us who are astronauts who are working for NASA. Its people who are doctors and scientists and engineers and veterinarians who all work together to make up a space mission that eventually allows us to get up on a rocket and go do experiments in space up on the space station.

 

When did you begin to think you wanted to be an astronaut?

 

Williams: When I was a kid I was thinking about what I wanted to do when I grow up, I think everybody thinks about that. My dads a doctor, so I was thinking maybe I want to be a veterinarian, but I really just didnt know, honestly, when I was a little kid. I didnt even really know when I was graduating from high school. So I had the opportunity to go to the Naval Academy, and after that I learned how to fly airplanes and helicopters. That led me to be interested in engineering and being interested in learning how to test fly aircraft. Later, test pilot school brought me down to NASAs Johnson Space Center and thats the first time I ever met an astronaut, John Young. He talked about landing on the moon and I thought, wow, he had to fly something like a helicopter to land on the moon and maybe I have those skills too. That was the very first time I thought about being an astronaut.

 

What should this new class of astronauts expect?

 

Williams: Were getting ready to have a new class of astronauts, a new selection in 2017. Im so excited for them, theyre going to have a big path of stuff to do in front of them. First of all, theyll probably be long-duration astronauts living on the International Space Station flying up there on commercial crew vehicles or Soyuz and then probably flying on the Orion spacecraft thats going to take them farther than low-Earth orbit. So I would suggest for them, of course, to prepare and get ready.

 

What advice do you have for anyone selected to become an astronaut?

 

Williams: So for the next group of astronauts thats going to be selected in 2017, I would give you a couple of pieces of advice: First of all, buckle your seatbelt, its going to be a wild and crazy ride. Youre going to be working with teams all over the world and youre going to be going to places that are just beyond what we are doing today. So, get ready for that adventure, stay healthy and get ready.

  • Like 2
  • 5 weeks later...

Translation: moving SpaceX's flights right, bunching the big milestone payments to occur closer to the start of FY2018 which is funded over the request.  

 

Early underfunding strikes again.

 

 

 

Edited by DocM

Glad to see the calendar; not glad to see everything moving to the right. Darn it. Barring SpaceX from funding the Dragon 2 flights on their own dime, this is going to keep happening; and I'm starting to think this ... *stuff* ... is happening on purpose to buy Boeing more time to get things sorted with CST. SpaceX, Falcon 9 and Dragon 2 have all been ready to do the Test Flight itinerary for a while now. November/December was the timeframe, and I'd love for them to be able to get there.

 

/sigh

  • Like 1

Then again, if push comes to shove, is there anything stopping SpaceX from doing their own exploratory testing while staying away from the ISS exclusion zone....They can complete what needs to be done on their own "dime" and recover it later.

 

:D

I would certainly want SpaceX to have a capsule up before Boeing and the coverage that goes with it, but if being hindered by bureaucracy is a problem....a few cores laying around...a capsule which needs testing.....mmmm test launch, and "surprise, it works"!

 

Wishful thinking   :D

  • Like 1
  • 1 month later...

The last NASA milestone schedule shifted both the Boeing and SpaceX crewed flights to mid-2017, but it appears only SpaceX is on track to meet their new date.

 

Boeing CST-100 Starliner crewed flight slips to 2018. The Starliner is too heavy and the Atlas V still has issues with acoustics. 

 

http://arstechnica.com/science/2016/05/boeings-first-flight-slips-its-now-up-to-spacex-to-wean-nasa-off-russia/

 

Boeings first crewed Starliner launch slips to 2018

 

The delay means only SpaceX can wean NASA off Russian transportation by next year.

 

NASA has pinpointed next year as the time when its dependence upon Russia to fly its astronauts to the International Space Station will finally end.

 

However, one of the two companies now slated to provide that service, Boeing, has said it will not be able to launch a crewed mission of its Starliner spacecraft until 2018 at the earliest.

 

In a report that first appeared in GeekWire, chief executive officer of Boeings defense, space and security division, Leanne Caret, told investors: Were working toward our first unmanned flight in 2017, followed by a manned astronaut flight in 2018." The company has been struggling to limit the mass of the spacecraft and acoustic issues related to its launch vehicle, a United Launch Alliance Atlas 5 rocket.

 

After an intense competition with other providers, Boeing received $4.2 billion in 2014 to finalize development of the Starliner capsule, and SpaceX received $2.6 billion to finish development of its Dragon capsule. A spokesman for SpaceX told Ars Wednesday night that the company remains on track for crewed missions in 2017.
>

  • Like 2

Who else saw this coming? There was no way Boeing was going to meet the timeline; while SpaceX has been literally begging to have the timeline ramped up. Dragon 2 is ready, and has been ready for quite some time now, for an unmanned qualification flight. NASA are the ones holding up the show. FACT. And now we know why ...

 

Let's get the Pad Abort Test, and the In-Flight Abort Test done already. The sooner it's done, the sooner SpaceX and Dragon 2 can do the UQ Flight 1. After that, assuming there are no issues, MF1 in 1H 2017. Let's get her on the Launch Pad, folks. PLEASE. 

  • Like 2

The Dragon 2 pad abort test was done last year, and the flight abort test was moved to after the uncrewed ISS mission.

 

The Skyliner weight issue is no surprise. Regardless of the ULA spec sheets, the heaviest payload Atlas V has flown was the last Cygnus CRS mission at 7,492 kg. Falcon 9 routinely tosses Dragon CRS missions  massing well over 10,000 kg.

Edited by DocM
  • Like 2

Well, I guess we are now seeing the huge advantage of SpaceX over Boeing. Where SpaceX owns both the rocket and the spaceship, not to mention that the rocket in question was designed from the very beginning to carry astro's and thus will not have the acoustics issues that Atlas now has nor the weight issues with the spaceship because they were designed to be made for each other!

  • Like 1

The version being an Atlas V 412, I'm wondering if the acoustics is at least partly because it uses a solid booster, 

 

400 series

1 AJ-60A (GEM 63 later) booster (thrust oscillations?)

Dual Engine Centaur (DEC, which rarely flies)

 

Atlas V changing to a GEM 63 graphite-epoxy cased solid is notable because a GEM 40 case failure caused the big Delta II explosion in 1997.

Edited by DocM
  • Like 1
15 hours ago, DocM said:

The Dragon 2 pad abort test was done last year, and the flight abort test was moved to after the uncrewed ISS mission.

 

The Skyliner weight issue is no surprise. Regardless of the ULA spec sheets, the heaviest payload Atlas V has flown was the last Cygnus CRS mission at 7,492 kg. Falcon 9 routinely tosses Dragon CRS missions  massing well over 10,000 kg.

It was my understanding that the Pad Abort Test needed to be done while on top of the Rocket that would be used to launch it, sitting on the Launch Pad (to test the Integration Release System in that scenario)? Of course I remember the Abort Test they conducted using the Dragon 2 by itself ... and it was a thing of beauty. :yes: 

10 hours ago, DocM said:

The version being an Atlas V 412, I'm wondering if the acoustics is at least partly because it uses a solid booster, 

 

400 series

1 AJ-60A (GEM 63 later) booster (thrust oscillations?)

Dual Engine Centaur (DEC, which rarely flies)

 

Atlas V changing to a GEM 63 graphite-epoxy cased solid is notable because a GEM 40 case failure caused the big Delta II explosion in 1997.

Well, it's not going to get CST off the pad without Boosters. Not enough grunt.  If it does, there's gonna be a problem ... as in this kind of problem ...

Yep ... no bueno.

 

So, ULA needs to figure something out. Are they going to bite the bullet and use a Delta Heavy? That's gonna be like going after a Wasp nest with a flame thrower ... so .. yeah. I dunno. /shrug

 

They could always hire SpaceX! :woot::rofl:

  • Like 1

With ULA cancelling Delta IV Medium there's a problem using Delta IV Heavy. With 2 launchers sharing infrastructure costs DIVH cost up to $400m a launch. Without DIVM cost sharing, a DIVH launch could rise to $800m to $1B per launch. Ouch.

 

Falcon 9 could easily lift Starliner having almost 2x the core thrust as Atlas V, but they lose having a backup booster.

Another Starliner issue brought up by the fired ULA guy earlier this year; 

 

possible heat shield damage during a  launch abort causing trouble if it's an abort to orbit, or high enough a re-entry is needed.

 

We’re working on getting it certified, and so right now, with Boeing, per the contract, we’re going through the human spaceflight organisation and looking at all the single point failures, all the redundancy, how things work, modifying the launch rockets primarily to meet their needs. It’s also interesting because the Boeing design doesn’t have an escape tower, it basically has four thrusters on the bottom of their capsule or the service module that will eject them off if there’s a bad day. And so there’s different things that the backpressure will tear apart, the backpressure of those thrusters if you have the wrong structural load will cause it to impinge on the capsule at very high altitudes, damages the heat shield, that will cause it to have a problem on reentry,

"Red Rover, Red Rover, this is Fido. We've got a Charlie Foxtrot inbound. Repeat, Charlie Foxtrot inbound." :no: 

 

That'll get a cab canned, in of itself. SpaceX designed Dragon 2 like they did to prevent the backpressure thing from happening; and Boeing went and copied them but copied them the wrong way. Blargh ...

 

The CST drama unfolds at a rapid pace now ... sheesh. Two months from now it's going to already be cancelled due to the severe flaws in the design. Boeing, LH/M and ULA Lobbyists are going to be burning up their favors in Washington to not have their respective companies' rear ends handed to them over this, yet another debacle. First the RD-180 mess, then Orion, now this. 

 

Candle's getting pretty low, fellas. Better think about how you're gonna replace it; 'cause times are about to change. Hate to see ya get shut out in the wintertime without a coat.

NASA has of course known about this, and IMO combined with an obvious unusable lower corners volume because of the sidewall angle (aka: attic effect), is likely why they were eliminated from CRS-2 so early.

 

Space News has also broken that the Atlas V + Skyliner stack has problems with ascent aerodynamic loads.  

 

Sheesh....

Yeesh. Load-bearing problems were seen in Orion too, but internally. Cracked the pressure vessel from stress during proof testing before they even got to the rated load. Had this occurred during launch or reentry the PV would have breached and Capsule likely would have popped like a balloon. And whom has been building Orion? Lockheed-Martin.

 

orionassembl.png

Boeing isn't likely to be so forthcoming about what's gone wrong, since CST is a Commercial Vehicle rather than a publicly-funded one; but it's a good bet that we'd see a lot of the same names on the Engineering Team(s). Follow the trail of ineptitude ... /sigh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • These are not "great" prices... just "less awful". Apparently "Those who forget the past are doomed to pay higher prices and think they've won."
    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!