Windows Technical Preview  

1031 members have voted

  1. 1. On a scale of 1-5, 1 being worst, 5 being best. What do you think of Windows 10 from the leaks so far?

    • 5.Great, best OS ever
      156
    • 4. Pretty Good, needs a lot of minor tweaks
      409
    • 3. OK, Needs a few major improvements, some minor ones
      168
    • 2. Fine, Needs a lot of major improvements
      79
    • 1.Poor, Needs too many improvements, all hope is lost, never going to use it
      41
  2. 2. Based on the recent leaks by Neowin and Winfuture.de, my next OS upgrade will be?

    • Windows 10
      720
    • Windows 8
      20
    • Windows 7
      48
    • Sticking with XP
      3
    • OSX Yosemite
      35
    • Linux
      24
    • Sticking with OSX Mavericks
      3
  3. 3. Should Microsoft give away Windows 10 for free?

    • Yes for Windows 8.1 Users
      305
    • Yes for Windows 7 and above users
      227
    • Yes for Vista and above users
      31
    • Yes for XP and above users
      27
    • Yes for all Windows users
      192
    • No
      71


Recommended Posts

I got it installed, but my sound wasnt working so i uninstalled the audio drivers and reset the computer and then it kept on crashing once booting into windows. Anyone else have a similar problem?

It's not crashing for me but any usage at all is incredibly slow. Seems this build is much less stable than the previous ones, but luckily Microsoft has suggested the next build is coming soon.

So, do we know for sure RTM is in 2015? Seems that since XP, many of the major releases have been in the second half of the year. XP hit RTM in October, Vista hit RTM in November, Windows 8 had an October release. My guess is we'll have a RC by BUILD 2015, with a final release before Christmas.

RTM should occur later this year, yes.

The way progress is being made with Windows 10 I wouldn't be at all surprised if it went RTM by June/July. Even now, Windows 10 feels polished enough to be run as a main OS. 

Looking into my system's sluggishness, (upgrade in place 8.1 to preview,) i see my AMD drivers (Radeon HD 8240)) drivers have stopped working, i uninstall them for a generic microsoft driver, which in turns installs the amd driver, which stops again.   interesting..

I think we can all say something went haywire with this build.   Drivers for all sorts of things have not worked at all or crashed quickly.

I was about to install as a dual boot to see if the issues I was experiencing in VMWare would stop  - but its plain to see there are so many issues - I will just wait till next build to try Win10 again.

This is the point where I laugh at all the people who had this as their main OS.

The way progress is being made with Windows 10 I wouldn't be at all surprised if it went RTM by June/July. Even now, Windows 10 feels polished enough to be run as a main OS. 

No it doesn't, the UI/icons/apps and mechanics like navigation/animations/features etc. are still in a state of flux. MAYBE August. Besides Office is not even ready yet.

Drivers need updating, or there's some debugging going on that is messing with drivers. Some people don't have performance issues while some do. It's the classic case of OS changes that need driver changes to work. But that's why we have these technical previews so early.

 

Can't wait to see how fast they start moving going forward, hope we get at least two new builds in February.

Or maybe not an Universal app at all. I wouldn't call something that is able to call restricted APIs an Universal app.

 

Another frustrating issue I've ran in today... there is no DockPanel available in WinRT. God dammit.

 

Hmm, I was afraid of that. Considering how they are opening up with their services and tools, I doubt that whatever they are working with won't be available for everyone else later on once it's more stable.

For starters, I have a feeling OneNote, among a few more Windows 10 specific apps are compiled with the Roslyn compiler, aka Native .NET style if I'm not mistaken. Already seeing huge boosts in startup time, so that may be it.

 

Also, regarding the news with the death of the charms bar, I'm afraid that is indeed true. Actually you might not even activate it from the hamburger button from the titlebar either. In OneNote for example, you activate its settings from within the app itself, by expending the left side menu, then clicking Settings. Furthermore, the settings pane slides in within the app itself and looks different from the standard Windows 8 specific one. Printing is also present there. Sharing, however.. yeah. Tough luck on that one, for now.

 

Also, hopefully these newer variants of Universal Apps are going to be more resilient from just dying off, because of the heavy workload on the system. It's annoying that the apps normally just end up entering into suspended mode, where you have no idea why they don't function properly in the background.

 

e0eae00ffc.jpg1b8f9b58df.jpg

  • Like 2

I'm having a very odd problem with the most recent version of the Technical Preview (9926). Did a clean install. Upon first boot, everything worked normally. Then, for some unknown reason, the whole UI with the 'modern' area of the OS went berserk. I can't view any text in the Start Menu, the Settings window doesn't show text, and it's just a mess - see attached screenshot. "Classic" Windows text and areas such as the Explorer, Control Panel, etc., work and look just fine.

 

Not sure what happened - any suggestions on how to fix this?

 

Thanks!

post-126842-0-85355100-1422288426.png

  • Like 2

The way progress is being made with Windows 10 I wouldn't be at all surprised if it went RTM by June/July. Even now, Windows 10 feels polished enough to be run as a main OS. 

Rather amusingly, the only rivals historically for Windows 10 Technical Preview's backward-compatibility and stability are the Previews of Windows 8, though 10 has more breakage (8 had none at all) - 10's breakage is restricted to three games (all with a common front-end).

 

Other than driver twitches (again, only 8's Previews had fewer, though there were some), the biggest complaint with 10 is aesthetics - which is typically fixed in the tailchase (quite a bit down the road yet).

Hmm, I was afraid of that. Considering how they are opening up with their services and tools, I doubt that whatever they are working with won't be available for everyone else later on once it's more stable.

For starters, I have a feeling OneNote, among a few more Windows 10 specific apps are compiled with the Roslyn compiler, aka Native .NET style if I'm not mistaken. Already seeing huge boosts in startup time, so that may be it.

 

Also, regarding the news with the death of the charms bar, I'm afraid that is indeed true. Actually you might not even activate it from the hamburger button from the titlebar either. In OneNote for example, you activate its settings from within the app itself, by expending the left side menu, then clicking Settings. Furthermore, the settings pane slides in within the app itself and looks different from the standard Windows 8 specific one. Printing is also present there. Sharing, however.. yeah. Tough luck on that one, for now.

 

Also, hopefully these newer variants of Universal Apps are going to be more resilient from just dying off, because of the heavy workload on the system. It's annoying that the apps normally just end up entering into suspended mode, where you have no idea why they don't function properly in the background.

 

e0eae00ffc.jpg1b8f9b58df.jpg

 

they showed os wide sharing at the event though

I really hope they've updated the way winrt apps run now, specially on a desktop that's always on AC and not batteries. They shouldn't be suspended if you're not on a mobile device.

  • Like 3

Regarding the OneNote screenshots above, I know it's still early days, but I still maintain that the Office 2013 look (squared off tabs) works better with the overall UI. And what's up with that Section tab? It looks totally out of place...

Anyone know how to quickly adjust screen brightness on a tablet?

 

In Windows 8.1, I simply swiped in the charms bar and all the settings were there (volume, brightness etc.).

 

Now, I get the Notifications, and even though there is a "Display" setting, it does not show brightness (which you would expect to be one of the main settings there).

 

I have sent feedback about this, but I am convinced that Microsoft is shafting touch users and reverting to the Windows 7 paradigm.

 

The charms bar was extremely useful on a tablet, but it seems to be gone for good.

 

Oh well ...

Regarding the OneNote screenshots above, I know it's still early days, but I still maintain that the Office 2013 look (squared off tabs) works better with the overall UI. And what's up with that Section tab? It looks totally out of place...

I would assume the section tab looks the way it does to keep the look and feel consistent across platforms. It looks the same on iOS and OS X.

I would assume the section tab looks the way it does to keep the look and feel consistent across platforms. It looks the same on iOS and OS X.

 

also to look like notebook folders, yes, it's the same thing everyone hates about earlier OSX design, except not nearly as overdone (like no faux leather folder and ring binder and paper texture and padding)

This topic is now closed to further replies.
  • Posts

    • expected when they force you by having to use TPM and secure boot for anti cheat crap, and lazy developers only test on windows 11.
    • The fact I need to use "Show more" like 99% of the time is so annoying. Or why I have 7-zip under 3 submenus when it could be in top. And Microslop keeps saying how they'll improve Start and I've not seen ANY improvement yet. In MONTHS. WTF?! I'll believe any of it when they actually deliver anything.
    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Doesn't even need a UI for point 2 - use some sort of JSON/XML container - because MOST users won't even bother.
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      PsYcHoKiLLa
      263
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!