Louisiana won't Recognize Same-Sex Marriages


Recommended Posts

Well, if those opposed had stopped acting like babies and got together with their opponents to sort this out fairly and equitably, something sensible could be in place NOW and SCOTUS wouldn't have been forced to ram it down their throats.  I'm glad they did it, but it was always going to make a lot of people very angry.

 

I don't know, I think getting 37/50 states to legalize same sex marriage in under 15 years is pretty fast. I don't think SCOTUS needed to act at all personally.

 

Law overrides beliefs. If you can't handle that, you're in the wrong job.

 

Ever heard of the first amendment?

 

 

 

Congress shall make no law respecting an establishment of religion, or prohibiting the free exercise thereof; or abridging the freedom of speech, or of the press; or the right of the people peaceably to assemble, and to petition the government for a redress of grievances.

 

Law does not supersede religion quite so easily.

Because if you are in a government position and are using your power to discriminate based on religion, that is a direct violation of the First Amendment.  

 

You don't have the right to force your religious beliefs on others.  If you deny access to the marriage paperwork (or any government based service like SNAP or a Fishing License) on the claims that it is against your religion, you are then imposing your beliefs upon others in the form of a governmental body.  It shows a favoritism to one specific religion or faith, and since we have the freedom to worship as we choose, or not to worship at all, forcing any religious test is considered unconstitutional.

 

I really can't explain it any clearer than that.

 

 

T

Not sure why this is so hard

 

Your job is to uphold the laws of the constitution not the bible. If you have religious reservations then step aside and let someone else do your job plain and simple. Like I said before as an official you can't opt in or opt out on which laws you want to abide by based on your religion. 

 

"The forcing of a person to violate their religious beliefs is also completely unconstitutional, but let's just ignore that, shall we?"

  • Like 2

Because if you are in a government position and are using your power to discriminate based on religion, that is a direct violation of the First Amendment.  

 

You don't have the right to force your religious beliefs on others.  If you deny access to the marriage paperwork (or any government based service like SNAP or a Fishing License) on the claims that it is against your religion, you are then imposing your beliefs upon others in the form of a governmental body.  It shows a favoritism to one specific religion or faith, and since we have the freedom to worship as we choose, or not to worship at all, forcing any religious test is considered unconstitutional.

 

I really can't explain it any clearer than that.

 

 

T

 

By the same token, the government has no right to force its employees to check their beliefs at the door. We are guaranteed free expression of our religion, and that does not end at the church door. I do agree that being able to deny a marriage license is wrong, but it is similarly wrong to force someone to officiate at a ceremony against their faith. You can't suspend one right to accommodate the other, and that needs to be true regardless of which side you're on.

 

There has to be some compromise that protects both parties' rights. Saying that the official must do it is wrong, but so is preventing the now-legal gay marriage.

By the same token, the government has no right to force its employees to check their beliefs at the door. I do agree that being able to DENY a marriage license is wrong, but it is similarly wrong to force someone to officiate at a ceremony against their faith.

 

There has to be some compromise that protects both parties' rights. Saying that the official must do it is wrong, but so is preventing the now-legal gay marriage.

 

Actually, it does...

 

Since you can not use any religious test *as a representative of the government* to either allow or deny a government service, then yes if you are working for the government you check your religious beliefs at the door.  The First Amendment does not allow you to force your beliefs upon others.  If the law says, "Gays can marry", then you do your job or find another.  

 

It's really that simple.....

 

EDIT - The pastor performing a religious marriage ceremony is NOT a government employee.  They have the right to refuse to perform that service.  However, the County Clerk giving you the marriage license doesn't.

 

 

T

Actually, it does...

 

Since you can not use any religious test *as a representative of the government* to either allow or deny a government service, then yes if you are working for the government you check your religious beliefs at the door.  The First Amendment does not allow you to force your beliefs upon others.  If the law says, "Gays can marry", then you do your job or find another.  

 

It's really that simple.....

 

 

T

 

No, it doesn't. Show me the clause in the Constitution which grants an exclusion to freedom of religion for government employees.

 

You seemingly ignored most of my post. Both rights are protected by law, and one should not void the other.

 

Simple concept, but difficult in execution. Telling those who practice a religion to STFU and do it anyway is as much a violation of rights as denying the marriage.

Actually, it does...

 

Since you can not use any religious test *as a representative of the government* to either allow or deny a government service, then yes if you are working for the government you check your religious beliefs at the door.  The First Amendment does not allow you to force your beliefs upon others.  If the law says, "Gays can marry", then you do your job or find another.  

 

It's really that simple.....

 

 

T

Exactly

And if these officials are about traditional marriage, then why don't they make more of a fuss about people who have had multiple marriages. Trump was just called out in an interview about how he is for Traditional marriage basically being asked what is Traditional about having 3 different marriages / wives. 

No, it doesn't. Show me the clause in the Constitution which grants an exclusion to freedom of religion for government employees.

 

You seemingly ignored most of my post. Both rights are protected by law, and one should not void the other.

 

Freedom of Religion gives you and me the right to worship as we choose. We can live our private lives as we see fit.

 

It does not, under any circumstances, gives you the right as a County Clerk working for the Government to tell a same-sex couple that they cannot marry because "God said so".  When you are working for the Government, you check your personal beliefs at the door and do your job.

 

No religious law, test, or belief can ever be used to perform or deny a service done by the Local, State, or Federal Government.

 

If you still don't understand it, I can't help you anymore....I really can't explain it any better.  

 

 

T

  • Like 2

Exactly

And if these officials are about traditional marriage, then why don't they make more of a fuss about people who have had multiple marriages. Trump was just called out in an interview about how he is for Traditional marriage basically being asked what is Traditional about having 3 different marriages / wives. 

 

Even the Catholic Church grants annulments, which basically state that for whatever reason the marriage wasn't valid. They're not easy to get, but they're in a very vague way analogous to divorce. And the Catholic Church does not remarry anyone without a annulment, as it regards the prior marriage as still in effect.

 

The only way it might be relevant is if the clerk were concerned with the status of the annulment or the equivalent in other faiths. Even if someone were aware of a prior religious marriage that would require annulment, how would a state clerk have access to the church records to base that decision?

 

Still, you make a valid point. The allowance for religious reasons should really extend only to not having to perform the ceremony - the clerk issuing the license should not be able to deny. I don't think a religious exemption should extend to paperwork.

I think a highly appropriate quote for the day

433d1300879beaf8a66cfc2209c1313d.png

 

And on the note of traditional marriages didn't one of our English monarchs Henry VIII invent his own church just because the Church wouldn't allow him to marry again by annul his last.

 

 

Henry, at the time a Roman apostolic Catholic, sought the Pope's approval for an annulment on the grounds that his marriage was invalid because Catherine had first been his brother's wife. Henry had begun an affair with Anne Boleyn, who is said to have refused to become his mistress (Henry had already consummated an affair with and then dismissed Anne's sister, Mary Boleyn, and most historians believe that Anne wanted to avoid the same treatment)[citation needed]. Despite the pope's refusal, Henry separated from Catherine in 1531. In the face of the Pope's continuing refusal to annul his marriage to Catherine, Henry ordered the highest church official in England, Thomas Cranmer, Archbishop of Canterbury, to convene a court to rule on the status of his marriage to Catherine. On 23 May 1533,[3] Cranmer ruled the marriage to Catherine null and void. On 28 May 1533, he pronounced the King legally married to Anne (with whom Henry had already secretly exchanged wedding vows, probably in late January 1533). This led to the break from the Roman Catholic Church and the later establishment of the Church of England.

https://en.wikipedia.org/wiki/Wives_of_Henry_VIII

Freedom of Religion gives you and me the right to worship as we choose. We can live our private lives as we see fit.

 

It does not, under any circumstances, gives you the right as a County Clerk working for the Government to tell a same-sex couple that they cannot marry because "God said so".  When you are working for the Government, you check your personal beliefs at the door and do your job.

 

No religious law, test, or belief can ever be used to perform or deny a service done by the Local, State, or Federal Government.

 

If you still don't understand it, I can't help you anymore....I really can't explain it any better.  

 

 

T

 

The clerk issuing the paperwork, I agree, and always have. Their job is to facilitate and file the paperwork, nothing more. Any religious exemption should not apply to them. However, the official who would be performing the ceremony should have some choice, since he should not have to participate in an event that violates his faith. An official should not have to violate his faith - or lose his job - over a ruling made after he signed on.

 

But for this opt out to be fair/legal, there must be alternatives. There have to be some officials willing to do so, otherwise the ability to opt out would constitute a denial of service. My concern here is not a desire to block gay marriage but the protection of freedom of religion. If officials are allowed to opt out, then there must be alternatives available. For particular officials to opt out, they can't be the only game in town.

 

Reread my posts - I've always focused on the performing of the ceremony. Opting out of the ceremony is not denying the service - the couple still has the license and can contract any official willing to do it.

 

Yes, now that gay marriage is legal the couple has a right to get the license and be married. But does that right supercede a minister's/priest's/justice of the peace's right to follow their religion? Should they be obligated to conduct a ceremony that is against their faith? My view is that such a requirement is a violation of separation of church & state/freedom of religion.

I don't know, I think getting 37/50 states to legalize same sex marriage in under 15 years is pretty fast. I don't think SCOTUS needed to act at all personally.

 

 

Ever heard of the first amendment?

 

First amendment allows you to practice your own religion.

Imposing your religious beliefs on other is an attack on their constitutional rights of citizens of the country, especially if you are a civil servant who is bound to treat all citizens equally as per the 14th amendment

 

I am going to pay author's rights to Taliseian https://www.neowin.net/forum/topic/1261624-louisiana-wont-recognize-same-sex-marriages/?view=findpost&p=596907564

 

 

Law does not supersede religion quite so easily.

 

In a Theocracy like Saudi Arabia, certainly. In a Republic like the United States, no.

There are no states religion in the US. Religious text do not have any bearing, only the US constitutions and the laws voted by elected representatives and validated by the judicial system have values

Yes, now that gay marriage is legal the couple has a right to get the license and be married. But does that right supercede a minister's/priest's/justice of the peace's right to follow their religion? Should they be obligated to conduct a ceremony that is against their faith? My view is that such a requirement is a violation of seperation of church & state/freedom of religion.

 

Super Easy solution that I think has been suggested earlier. The only recognized and legal marriage is performed by a civil servant and religious ceremonies do not have any legal weight. If you want to get married, you get to the city hall. If you want to do a religious ceremony at the church, the temple, the synagogue; the mosque and have a party between the family, you can but this is accessory

Super Easy solution that I think has been suggested earlier. The only recognized and legal marriage is performed by a civil servant and religious ceremonies do not have any legal weight. If you want to get married, you get to the city hall. If you want to do a religious ceremony at the church, the temple, the synagogue; the mosque and have a party between the family, you can but this is accessory

 

So in other words, force those who want a religious ceremony to have 2? Some people do choose to go that route, but why should it be a requirement? Note I did not specify a religious ceremony - the issue in question here is a secular official, so your suggestion is not a solution in this particular case.

 

Still, that would be an answer that provides some benefit to both sides. Maybe not an ideal one, but I'm not sure there is an ideal one.

First amendment allows you to practice your own religion.

Imposing your religious beliefs on other is an attack on their constitutional rights of citizens of the country, especially if you are a civil servant who is bound to treat all citizens equally as per the 14th amendment

 

Imposing "beliefs" or life choices on others in general is bad practice. Forcing people, through judicial ruling, to tolerate something they voted against is in and of itself a breech of their rights and the legislative process. Regardless of issue, that's what it is.

 

People are forgetting the context of all this. It was not until 2008 that we had in all 50 states legally defined what a marriage even was. It's not an "imposing of religious beliefs" to define something not yet defined legally, and the states chose their own definitions in a relatively short amount of time. 50 states in around 6 years. That' blazingly fast legislation wise. To assume that by defining something are intentionally excluding things from that definition is ludicrous, because there was no definition in the first place. Therefore it's a neutral action.

 

Lets not forget that marriage is a state level affair, so other things have been breached here than just the rights of religious groups, but entire communities to decided their own legislation. If people think such practices are ok because "well, the ends justify the means" that's just a dumb way to go about it. The ends never justify the means, ever. You can't murder someone because you think doing so will make the world a better place anymore than you can force people to conform to some social standard because you have assumed you are on a higher moral ground.

 

That's not to say I don't agree with the ruling, but I don't like the ruling itself. The act of it having been ruled by a judicial body instead of voted for. But for some reason people here, who continuously accuse the religious of "cherry picking" the values they live by and enforce are doing just that with the laws of the land. Suddenly certain parts of the way our system works are "impractical" when they get in the way of a socially accepted "good cause" and then when it's the opposite those systems are in place "for a good reason". If this was about defining marriage as man and woman I'm sure the LGBT community would be up in arms over it being decided in the courts and not via legislation. That it'd be tyranny by the judicial branch.

 

Double standards suck no matter who employs them. The religious or the self concluded righteous.

I think a highly appropriate quote for the day

433d1300879beaf8a66cfc2209c1313d.png

 

And on the note of traditional marriages didn't one of our English monarchs Henry VIII invent his own church just because the Church wouldn't allow him to marry again by annul his last.

 

I think a highly appropriate quote for the day

433d1300879beaf8a66cfc2209c1313d.png

 

And on the note of traditional marriages didn't one of our English monarchs Henry VIII invent his own church just because the Church wouldn't allow him to marry again by annul his last.

 

 

I think a highly appropriate quote for the day

433d1300879beaf8a66cfc2209c1313d.png

 

And on the note of traditional marriages didn't one of our English monarchs Henry VIII invent his own church just because the Church wouldn't allow him to marry again by annul his last.

Exactly - the Church of England (or Anglican Church, as it is called in the US).  And ever since, said Church has had a running feud with the Roman Catholic Church, which resulted in MUCH discrimination against British-born practicing Roman Catholics (and eventually the founding of the colony of Maryland - one of the original thirteen United States).  And the Roman Catholics weren't the only religious movement the Church of England picked fights with - except for Rhode Island, Georgia, and Delaware, ALL of the original colonies were the DIRECT result of religious persecution instigated by the Church of England.  (While Rhode Island was founded by those escaping religious persecution, they were escaping from colonial Connecticut - not England, and Georgia was a prison colony.)

So in other words, force those who want a religious ceremony to have 2? Some people do choose to go that route, but why should it be a requirement? Note I did not specify a religious ceremony - the issue in question here is a secular official, so your suggestion is not a solution in this particular case.

 

Still, that would be an answer that provides some benefit to both sides. Maybe not an ideal one, but I'm not sure there is an ideal one.

 

It is really not that complicated: Have the civil ceremony in the morning and the religious one during the afternoon and spend the rest of the day having a family party celebration.

I know some interfaith couples who had oecumenical ceremonies, some others had two ceremonies. More celebrations and more happiness, that gets my vote.

It is really not that complicated: Have the civil ceremony in the morning and the religious one during the afternoon and spend the rest of the day having a family party celebration.

I know some interfaith couples who had oecumenical ceremonies, some others had two ceremonies. More celebrations and more happiness, that gets my votes.

 

Makes some sense, and it would be an answer for the sacramental marriage issue. Let the sacrament be the sacrament, and the legal union be the legal union. As long as it doesn't make things more expensive for the families involved.

 

 

Still, like I said, it doesn't address this particular issue.

That's the thing about the bible, it can be interpreted many different ways, often in a way that aligns with and supports the existing beliefs of the interpreter.

Same thing is happening with the terrorist ISIS... they are hiring extremist terrorist by telling them that the Quran said that they need to kill and behead. All religions are just messed up. 

Imposing "beliefs" or life choices on others in general is bad practice. Forcing people, through judicial ruling, to tolerate something they voted against is in and of itself a breech of their rights and the legislative process. Regardless of issue, that's what it is.

 

People are forgetting the context of all this. It was not until 2008 that we had in all 50 states legally defined what a marriage even was. It's not an "imposing of religious beliefs" to define something not yet defined legally, and the states chose their own definitions in a relatively short amount of time. 50 states in around 6 years. That' blazingly fast legislation wise. To assume that by defining something are intentionally excluding things from that definition is ludicrous, because there was no definition in the first place. Therefore it's a neutral action.

 

Lets not forget that marriage is a state level affair, so other things have been breached here than just the rights of religious groups, but entire communities to decided their own legislation. If people think such practices are ok because "well, the ends justify the means" that's just a dumb way to go about it. The ends never justify the means, ever. You can't murder someone because you think doing so will make the world a better place anymore than you can force people to conform to some social standard because you have assumed you are on a higher moral ground.

 

That's not to say I don't agree with the ruling, but I don't like the ruling itself. The act of it having been ruled by a judicial body instead of voted for. But for some reason people here, who continuously accuse the religious of "cherry picking" the values they live by and enforce are doing just that with the laws of the land. Suddenly certain parts of the way our system works are "impractical" when they get in the way of a socially accepted "good cause" and then when it's the opposite those systems are in place "for a good reason". If this was about defining marriage as man and woman I'm sure the LGBT community would be up in arms over it being decided in the courts and not via legislation. That it'd be tyranny by the judicial branch.

 

Double standards suck no matter who employs them. The religious or the self concluded righteous.

 

Your premise of marriage being a state level issue is wrong, this is a civil rights issue and as with all civil rights issue: it is decided at the federal level.

 

This is the following case: two gay men are married in California, one of them is critically injured and rushed to the hospital, the doctor must ask the family for a decision regarding medical choice. In California where their marriage is recognized, the partner will have to be consulted. In Texas for example, where the marriage would not be recognized, the partner cannot say anything. .

The man injured dies, in California, the partner inherits. In Texas, he gets nothing.

 

Yet, they both got married to shoulder the hardness of life together.

Your premise of marriage being a state level issue is wrong, this is a civil rights issue and as with all civil rights issue: it is decided at the federal level.

 

This is the following case: two gay men are married in California, one of them is critically injured and rushed to the hospital, the doctor must ask the family for a decision regarding medical choice. In California where their marriage is recognized, the partner will have to be consulted. In Texas for example, where the marriage would not be recognized, the partner cannot say anything. .

The man injured dies, in California, the partner inherits. In Texas, he gets nothing.

 

Yet, they both got married to shoulder the hardness of life together.

Ill save you some time, He doesn't care

For services that could be true if the person asking for the service is not a protected class in the civil rights statute. Or if the goods were not involved in interstate commerce under federal law.

In many States LGBT's are not a protected classes.

True - even though Maryland DOES recognize same-sex marriage (approved by referendum in 2012), LGBT is NOT a protected class in Maryland's state constitution (and thus not part and parcel of Maryland civil-rights law). In how many OTHER states that recognized SSM pre-SCOTUS is this the case?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      222
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!