Recommended Posts

WP_20151113_09_09_18_Pro.thumb.jpg.5d08f

Classics Rodimus wearing the 3rd party Fansproject Warbot Protector armor, designed to upgrade him to Rodimus Prime. The armor combines with the gun station to his left to become a trailer to give him the classic "flaming Winnebago" altmode. To his right is Combiner Wars Rodimus, holding "Blesser", a Targetmaster designed to go with Protector. This particular version is an exclusive, offered to those who donated to hurricane relief a few years back.

WP_20151113_09_10_28_Pro.thumb.jpg.8c097

Protector/Rodimus Prime manning his gun platform. There's also a seat for the targetmaster to operate it.

WP_20140830_22_43_33_Pro.thumb.jpg.f7dd2

AOE Battle Command Optimus Prime with his team. The trailer, in addition to transporting vehicles, becomes a flight pack for Prime

WP_20140124_1.thumb.jpg.3b4271c2f559f2f7

G1 Bumblebee about to be executed by Prime Bee and Movie Bee. I have no idea why . . .

WP_20140707_17_07_18_Pro.thumb.jpg.ed30f

Bee: "I don't know you."

Nice. I have an original, complete with "drunken lurching" functionality intact (can't really call it walking :laugh: ). All he needs is some Reprolabels to spruce him up. There's a nice upgrade set, similar to the one for G1 Metroplex you can see in some of the Autobot City shots.


I like Trypticon but that is one awful toy they made.

WP_20140531_12_34_26_Pro.thumb.jpg.210e4

Generations Metroplex, holding a N scale SEPTA trolley. His hands are 3rd party 3D printed replacements, which not only have improved articulation over the stock ones, but also transform.

Mind me asking where did you get the hands? I have the same unit, and the hands are indeed a bit "stiff".

 

Mind me asking where did you get the hands? I have the same unit, and the hands are indeed a bit "stiff".

I ordered them from a guy with the handle MegaMoonMan on the TFW2005 forums. Your best bet is to create an account on that site and send him a personal message.

He 3D prints upgrades and replacement parts for a variety of figures. For Metroplex he also made ramp extensions (so the ramp actually reaches the ground!) and replacement knee joints to improve the city mode. Basically, the add-ons make Generations Metroplex more like the G1 toy. The parts have a slightly rough texture to them due to the printing process and his equipment, but they're durable and look great. I had some difficulty getting the new hands on, though!

The parts have a slightly rough texture to them due to the printing process and his equipment, but they're durable and look great. I had some difficulty getting the new hands on, though!


Yeah that's the down-side of the more affordable 3D printers. The "fill-in" value is what reduces it but takes drastically longer to complete the print (not to mention also possibly clogging the filiment delivery nozzle). With yours though, the process has left a textured affect that I would be more than happy with as it seems to fit very well with the overall design.

Yeah that's the down-side of the more affordable 3D printers. The "fill-in" value is what reduces it but takes drastically longer to complete the print (not to mention also possibly clogging the filiment delivery nozzle). With yours though, the process has left a textured affect that I would be more than happy with as it seems to fit very well with the overall design.

The texture on the hands actually helps Metroplex grip things - that trolley was secure in his grasp.

WP_20151118_09_26_40_Pro.thumb.jpg.a94d7

G1 "KMart Legends" Bumblebee. Larger and a bit more advanced transformation than the original Microman-based figure. A pity he has Cliffjumper's head rather than his own. Payback for all of the "Cliffjumpers" which are actually red Bumblebees we get nowadays, I guess.

WP_20151118_09_30_07_Pro.thumb.jpg.a43c0

Beetle mode. More realistic proportions than the original, since this one wasn't modeled after a Penny Racer. The headlights are hand-painted, as is the bumper (which needs touching up.)

  • 2 weeks later...
This topic is now closed to further replies.
  • Posts

    • I think there will be a 27H1 for actual users of 26H1 The 25h2 supports ARM too : Snapdragon X, Snapdragon X Plus and Snapdragon X Elite
    • Poll: Grand Theft Auto VI price predictions, cast your vote by Pulasthi Ariyasinghe After years of waiting, Rockstar will be solidifying the launch date of Grand Theft Auto VI with the launch of pre-orders next week. While the studio has confirmed a date for this occasion, it is yet to attach a price to the highly anticipated game. So let's see what our readers think it will cost at launch. The Grand Theft Auto VI pre-orders will kick off on June 25 for digital and physical editions. Unless some last-minute changes happen, the release date will be November 19, 2026, across Xbox Series X|S and PlayStation 5. Unfortunately, there's still no information about a PC version from the developer or the publisher Take-Two. Now the question becomes, how much will Grand Theft Auto VI cost at launch? The game is predicted by some analysts to be the biggest launch of an entertainment product ever. With the amount of hype that has been built behind it and with ballooning development costs, Take-Two may price this Grand Theft Auto entry differently from other AAA titles. The current price of a AAA game is $69.99. That norm almost rose to $79.99 before calming down. But with such a massive release, Grand Theft Auto VI may be the game that pushes the boundary again. It's also possible that Take-Two keeps the price relatively low to increase the number of players that jump in early and keep them hooked on Grand Theft Auto Online to spend on microtransactions for years to come. Keep in mind that the below poll is asking for a prediction of the standard edition price, not a deluxe or any other special edition that Take-Two will introduce for additional benefits. Also, there is the chance of the company splitting up the campaign and online portions. If you think that will happen, put your vote on what you think will be the total cost of the two. Poll Poll: How much will Grand Theft Auto VI cost? $59.99 $69.99 $79.99 $89.99 $100 or more Submit Vote If you have a very specific prediction in mind, sound off in the comments below.
    • Would you please fix your graphics. They are outdated and don't fit the article.
    • The Light of Life? We actually do glow till our Death, study finds by Sayan Sen Image by Rafael Rendon via Pexels A study by researchers at the University of Calgary has found that living organisms produce an extremely faint light known as ultraweak photon emission, and that this glow appears to drop significantly after death. The research was published in the Journal of Physical Chemistry in April 2025 and quickly drew widespread attention, leading to more than 200 news stories about the findings. Ultraweak photon emission (or UPE), sometimes called biophoton emission, refers to tiny amounts of light released by living cells as a result of normal biological activity. A photon is the basic particle of light, and researchers say every living system examined so far, including plants and animals, has been found to emit these photons. The glow is far too faint to be seen by the human eye. “I suppose it has a little to do with people being reminded of auras,” says Dr. Christoph Simon, PhD, one of the authors of the study and a professor in the Department of Physics and Astronomy in the Faculty of Science. “It is a fact that living beings glow. It’s a very weak glow, but it’s there and visible with very sensitive cameras.” According to the study, the light involved is extremely weak, ranging from 10 to 1,000 photons per square centimetre per second across a spectral range of 200 to 1,000 nanometres. For comparison, a nanometre is one-billionth of a metre and is commonly used to measure wavelengths of light. Detecting emissions at such low levels requires highly specialized equipment. To study the phenomenon, researchers used electron-multiplying charge-coupled device (EMCCD) and charge-coupled device (CCD) cameras. These imaging systems are designed to detect extremely small amounts of light, including individual photons, while minimizing background noise. The technology allowed researchers to capture signals that would otherwise be impossible to observe. The team worked with the Human Health Therapeutics Research Centre at the National Research Council of Canada (NRC) in Ottawa to examine photon emissions in mice. Researchers took two-hour exposure images of the animals before and after death and compared the results. “We saw that the level of light that they emit – this biophoton glow – is distinctly different between living and dead animals,” says Dr. Daniel Oblak, PhD, an associate professor in Physics and Astronomy and the corresponding author of the study. The images showed a clear decrease in photon emissions after death across the entire body of each mouse. According to the researchers, this provided direct evidence that living and dead tissue produce different levels of ultraweak photon emission. “It’s a very small amount and it’s, of course, very tricky to detect,” Oblak says. The study grew out of discussions between Simon, whose research interests include quantum biology, and Oblak, whose work focuses on detecting light for quantum communication experiments. Quantum biology is a field that explores whether processes described by quantum physics, which studies matter and energy at very small scales, may also play a role in living systems. “Since I work as a quantum physicist on light detection for quantum communication, I thought that experimentally we have a lot of the tools to be able to detect the light,” Oblak explains. The researchers also investigated UPE in plants and found that the light changed in response to stress. When plants were exposed to higher temperatures or physically injured, their photon emissions increased. Chemical treatments also affected the glow. Among the substances tested, the local anesthetic benzocaine produced the strongest emission response when applied to injured plant tissue. These findings suggest that ultraweak photon emission is closely linked to biochemical and metabolic activity inside living organisms. Metabolism refers to the chemical reactions that allow cells and organisms to stay alive and function. Because these reactions change when an organism experiences stress, injury or disease, researchers believe UPE may provide a way to monitor those changes. The researchers stress that the glow is a physical and biological phenomenon, not a metaphysical one. Oblak says more research is needed to understand exactly how the light is produced and what information it may reveal about the condition of living tissue. “We must understand what that is to figure out what’s happening,” he says. “If we can understand how that relates to certain influences on the body – stress, diseases – then that could be used as a diagnostic tool.” The researchers believe the technique could eventually help scientists study health and disease without invasive procedures. Because UPE can be measured without adding dyes, markers or labels, it may offer a way to monitor whether tissue is healthy, damaged or alive. In plants, it could help researchers better understand how organisms respond to injury, heat and other forms of stress. While the work is still in its early stages, the study demonstrates that ultraweak photon emission imaging can provide a non-invasive and label-free way to observe biological activity. Researchers say the approach could become a useful tool for studying vitality, stress responses and other important processes in both animals and plants. Source: University of Calgary, ACS publication This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      82
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      72
  • Tell a friend

    Love Neowin? Tell a friend!