Recommended Posts

Live coverage: Commercial Proton launch set for Thursday

 

Quote

ILS says the issue that caused officials to halt the Proton launch countdown yesterday has been resolved, and the rocket is on track for liftoff at 0710 GMT (3:10 a.m. EDT) Thursday with a communications satellite for Intelsat and DirecTV.

 

"Following the additional verifications of the cables and connectors associated with last night’s issue which resulted in a delay to the Intelsat 31 launch, the problem has been isolated to a connector on the flight vehicle," ILS said in a statement today. "The ground system was wrongly identified as the cause of today’s delay. The flight connector issue has been resolved and the vehicle cleared for flight."

 

The Proton rocket will blast off from the Baikonur Cosmodrome in Kazakhstan, carrying the U.S.-built telecom satellite into a "supersynchronous" transfer orbit more than 65,000 kilometers (40,000 miles) above Earth. The Breeze M upper stage will deploy the Intelsat 31/DLA-2 spacecraft at 2241 GMT (6:41 p.m. EDT) Thursday after a 15-hour sequence of orbit-raising burns.

live coverage at the link...should be great...:D

http://spaceflightnow.com/2016/06/07/intelsat-31-mission-status-center/

 

-----------------------

 

Live coverage: Delta 4-Heavy countdown and launch journal

 

Quote

Clearing its final readiness review and now simply waiting for countdown clocks to begin ticking, a Delta 4-Heavy rocket will haul a classified payload into space Thursday from Cape Canaveral.


Liftoff of the United Launch Alliance rocket is planned for 1:59 p.m. EDT (1759 GMT).

 

Although the duration of the day's launch window has not been publicly disclosed, officials previously said liftoff would happen before 6:30 p.m. EDT (2230 GMT).

 

We will have complete live play-by-play coverage of the count and launch on this page, as well as a webcast of liftoff.

live coverage at the link...double launch day....

http://spaceflightnow.com/2016/06/08/d374_journal/

 

------------------------

 

Masten Space Systems Introduces Xodiac and XaeroB Next Generation Reusable Rockets

 

masten_Xodiac_and_XaeroB_060816_945.jpg

Masten Space Systems Introduces Xodiac and XaeroB Next Generation Reusable Rockets.

 

Quote

On Monday Masten Space Systems introduced its next generation reusable rockets Xodiac and XaeroB based on the previous generation Xombie, Xoie, and Xaero.

According to the Masten blog posting "both Xodiac (open frame) and XaeroB (aeroshell) share the core architecture that has powered Masten's rockets to date - LOX/IPA; pressure fed, regeneratively cooled engine; Masten avionics and GNC. The two new vehicles also share many of the same components, enabling Masten to have more efficient operations and less risk of service interruption."

"These new rocket vehicles continue to offer the features of Masten terrestrial test bed:
- precision vertical landing
- custom flight profile
- rapid iteration
- custom physical/mechanical integration
- rocket powered station keeping"

http://spaceref.biz/company/masten-space-systems-introduces-xodiac-and-xaerob-next-generation-reusable-rockets.html

 

Next generation reusable rockets - Xodiac and XaeroB

video is 1:25 min.

 

 

:D

  • Like 1

Proton suffers Second Stage Anomaly, Intelsat 31 continues Orbital Ballet atop Briz-M Stage

 

Quote

Thursday’s Proton-M launch with the Intelsat 31 communications satellite dodged a bullet when the second stage of the workhorse suffered an engine-related problem in the last seconds of its burn, creating a performance shortfall that is likely to remain without consequences for the satellite payload.

 

While Intelsat 31 continues trucking into orbit atop its Briz-M upper stage, information emerged that Proton’s ten-minute ascent mission earlier in the day was not without trouble.

 

The 58-meter tall Proton rocket lifted off from Site 81/24 at the Baikonur Cosmodrome at 7:10 UTC, coming back from a one-day launch delay caused by a faulty electrical connector on the rocket that needed to be replaced. Thundering off powered by its six RD-275M engines, Proton took the standard route towards Geostationary Transfer Orbit, swinging to the north-east to head towards the Russian border.

 

Quote

To make up for the performance shortfall on Proton, Briz-M extended the burn of its 2,000 Kilogram-force engine by 32.66 seconds to reach the planned 173-Kilometer parking orbit.

analysis at the link...

http://spaceflight101.com/proton-second-stage-anomaly-intelsat-31/

 

Launch of Russian Proton-M Rocket carrying Intelsat 31

video is 11:38 min., launch is at the beginning of the video

 

 

 

--------------------------------

 

Live coverage: Delta 4-Heavy countdown and launch journal

 

Quote

1732 GMT (1:32 p.m. EDT)
The weather improvement trend is continuing, with the best shot for launch today likely coming between 2:15 and 3:15 p.m. EDT (1815-1915 GMT), the weather officer indicates. The odds of acceptable weather in the rest of the launch window have been reduced to just 10 percent.

coverage at the link...

http://spaceflightnow.com/2016/06/08/d374_journal/

 

:D

Live coverage: Delta 4-Heavy countdown and launch journal

 

Quote

1751 GMT (1:51 p.m. EDT)
NEW LAUNCH TIME set for 2:55 p.m. EDT when weather improvement is forecast for the Cape.

http://spaceflightnow.com/2016/06/08/d374_journal/

8 minutes ago, Draggendrop said:

Live coverage: Delta 4-Heavy countdown and launch journal

 

http://spaceflightnow.com/2016/06/08/d374_journal/

Guess there is no other stream for this?  

Capture.JPG

ugh

  • Like 1
2 minutes ago, jjkusaf said:

Guess there is no other stream for this?  

Capture.JPG

ugh

Not many, but here is another...

http://www.ulalaunch.com/webcast.aspx

/sigh.  Same thing ... it is like they're streaming in 360p.  LOL

Maybe the sound will be in HD.  My dogs are asleep...they need a little rumble to wake them up.

  • Like 1
1 minute ago, Draggendrop said:

It is bad, but at least we get to see a NRO launch, usually they are a bit touchy about what is shown...and may even have a hand in this.

 

:)

Good point.

 

1505 ET launch time now.

  • Like 1
10 minutes ago, jjkusaf said:

hmmm.  Does anyone know how long they will extend this out before scrubbing?  

 

 

WUNIDS_map.gif

 

Quote

No information on the duration of the launch window is released for NRO launches, though ULA noted earlier that the launch period ends at 22:30 UTC, but that time does not represent the end of the actual launch window.

 

A backup launch slot is available on Saturday because SpaceX booked the range on Friday. Weather will improve slightly, to a 60% chance of acceptable conditions as the boundary continues to linger over the area.

http://spaceflight101.com/nrol-37-delta-iv-heavy-launch-preview/

 

We need this....

tumblr_nwyf3eZK9F1scmx8ro1_500.gif

 

:woot:

1 hour ago, jjkusaf said:

ut oh.  Looks like maybe a scrub or another delay.

 

Edit:

Delayed.  Waiting for new launch time due to weather.

From what I gathered on this mornings news (I moved down here a few months ago), the Window is 6:30PM ET.  However, the weather was supposed to get worse as the afternoon went on.  It looks like that prediction is coming true.

 

 

  • Like 2
Quote

2010 GMT (4:10 p.m. EDT)
While the weather wait continues, a reminder that today's Delta 4-Heavy launch period lasts another couple of hours.

http://spaceflightnow.com/2016/06/08/d374_journal/

 

:(

 

 

Quote

2025 GMT (4:25 p.m. EDT)
If launch does not occur today, it is believed that the next opportunity would come on Saturday afternoon.

http://spaceflightnow.com/2016/06/08/d374_journal/

2 minutes ago, Draggendrop said:

SpaceX has a launch on the 14th, the 10th is probably the static fire...we'll hear soon....:D

Yea...I was thinking one of the rockets they've recovered.  They haven't fired the last one.  What about the one before that (the May 6 JCSAT)?

  • Like 1
15 minutes ago, jjkusaf said:

Yea...I was thinking one of the rockets they've recovered.  They haven't fired the last one.  What about the one before that (the May 6 JCSAT)?

All 4 cores being in the barn, has shown from images, that the first 2 are in various stages of "testing tear down". No word yet, but a stage is supposed to go to McGregor for tests and they also need a core for LC 39A testing. I think we will know soon, but work is still in progress on 39A, the shuttle swing arm teardown.

Quote

2152 GMT (5:52 p.m. EDT)
Permission to proceed has been granted by the ULA launch director and the National Reconnaissance Office mission director.
However, the weather remains NO GO as it has since about 11:30 a.m. EDT today. The team has been instructed to pick up the countdown to run through procedures before calling a hold prior to liftoff at T-minus 60 seconds.

 

2151 GMT (5:51 p.m. EDT)
The final readiness polls of the launch team and mission managers have been completed. No technical problems are being worked and all rocket, spacecraft and ground systems are "go" for liftoff at 5:58 p.m.

http://spaceflightnow.com/2016/06/08/d374_journal/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Zed 1.7.2 has landed with updated OpenCode models, bug fixes and other improvements by David Uzondu Zed 1.7.2 recently landed on the stable release channel, bringing a host of AI-related features including automatic context compaction and settings-based skill management, along with other things like better Markdown preview rendering and custom git commands in the graph view. Starting with the AI stuff, the developers introduced "/compact", a command that basically summarizes your conversation history on demand. This tool prevents your active chat window from hitting token limits by compressing older parts of the dialogue into a brief overview. In addition to that, the team relocated skill management to the settings UI, improving how the application communicates errors regarding those skills, and updated the OpenCode model roster to support DeepSeek V4 Flash, MiniMax M3, Qwen 3.7 Plus, and Nemotron 3 Ultra Free. External agent users can also monitor context window cost metrics and delete individual sessions directly from their history. Right-clicking ref labels in the git graph now opens a context menu that runs different actions against selected targets, kind of how VS Code does it. Here are some of the bug fixes this new release brings: The active agent fails to auto-select when creating a new git worktree. A scrollbar unexpectedly appears on wrapped code blocks in the agent chat. Collapse indicators for project headers appear when performing sidebar searches. Bracketed ellipsis title prefixes fail to show the ellipsis icon properly. Project icons render incorrectly in the recent projects picker. Diff hunk controls appear inside non-editable commit view multibuffers. The software update button hangs indefinitely on the downloading stage. Restoring an agent terminal in a remote project triggers a sudden crash. Splitting a pane that contains an active commit view causes a crash. Linux Wayland freezes when trying to read the clipboard from laggy external apps. Zed is a "newish" code editor trying to break the massive stronghold VS Code has on the developer community. Funny enough, the editor was created by former GitHub employees who worked on the Atom text editor (which Microsoft killed in 2022, several years after it bought GitHub). The project officially hit version 1.0 back in April, introducing platform parity for Windows and Linux alongside deep support for DeepSeek-V4-Pro.
    • 26H2 absolutely will support ARM Windows just not on devices that came with 26H1. This is evident by the fact I am running 26H2, which on my MacBook Neo and Surface Pro 12 (inch), within a VM.
    • Mp3tag 3.35 by Razvan Serea Mp3tag is a powerful and yet easy-to-use tool to edit metadata (ID3, Vorbis Comments and APE) of common audio formats. It can rename files based on the tag information, replace characters or words from tags and filenames, import/export tag information, create playlists and more. The program supports online freedb database lookups for selected files, allowing you to automatically gather proper tag information for select files or CDs. Mp3tag supports the following audio formats: Advanced Audio Coding (aac) Free Lossless Audio Codec (flac) Monkeys Audio (ape) Mpeg Layer 3 (mp3) MPEG-4 (mp4 / m4a / m4b / iTunes compatible) Musepack (mpc) Ogg Vorbis (ogg) OptimFROG (ofr) OptimFROG DualStream (ofs) Speex (spx) Toms Audio Kompressor (tak) True Audio (tta) Windows Media Audio (wma) WavPack (wv) Mp3tag 3.35 changelog: This version introduces a new Files options page, enhanced toolbar customization, support for RF64 WAV files, improved Discogs and MusicBrainz tag sources, and many other improvements and fixes. See the Release Notes for more details. Download: Mp3tag 64-bit | 5.7 MB (Freeware) Download: Mp3tag 32-bit | 5.2 MB Link: Mp3tag Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • The FIFA World Cup is not US centric.
    • It’s amusing how Microsoft is pushing IT admins as if this was a major, game-changing update. In reality, it’s just an enablement package that bumps the build number, which is disappointing compared to the more substantial 22H2 and 24H2 releases. Technically, 25H2, 26H1, and the upcoming 26H2 are essentially the same, differing only in support schedules. They could have included the Windows K2 improvements here, but chose not to. The era of Windows being in the backburner continues, and this 26H2 release feels like an afterthought. Shame, Nadella, shame.
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      78
    4. 4
      Steven P.
      72
    5. 5
      Michael Scrip
      71
  • Tell a friend

    Love Neowin? Tell a friend!