Recommended Posts

3 hours ago, jjkusaf said:

Missing a couple of Merlin engines on the back of that food truck .... otherwise .... looks great!

 

If Spaceballs could do it ... so can SpaceX

626b80dd797753892d9d080c34b3758b.jpg

This is so full of win, I don't know where to even begin ... only thing that's missing is "Raise Your Hands", the side pan camera, and the SpaceX paintjob. :yes: :woot:

extra data...

 

reference the above newest Dragon v1...

 

This one is D1-11 which is flying on CRS-9.
D1-12 will fly on CRS-10.
CRS-11 will be the first Dragon capsule to be reused using pressure hull of Dragon D1-6.
D1-6 was CRS-4
CRS-11 will be DR1-? (Dragon v1 reusable - #)

NASA has stated new launchers. NASA has not said that cargo craft can't be refurbished.
Various avionics and thrusters have already been reused in Dragon, Elon statement approx 2 years ago...

reference-EchoLogic/reddit

will require verification, but source usually accurate.

 

pressure vessel (hull)

DragonPressureHull.jpg

 

----------------------------

Remember the launch delay due to the barge.....

 

 Waivers of Ship Protection Probability of Impact Requirement

A Notice by the Federal Aviation Administration on 05/10/2016

 

summary

Quote

This notice concerns two petitions for waiver submitted to the FAA by Space Exploration Technologies Corp. (SpaceX): A petition to waive the requirement that a waiver request be submitted at least 60 days before the effective date of the waiver unless good cause for later submission is shown in the petition; and a petition to waive the requirements that exclude persons in waterborne vessels from the collective risk criteria and limit the probability of impact on waterborne vessels to 1 × 10 −5.

full submission at...

https://www.federalregister.gov/articles/2016/05/10/2016-09685/waivers-of-ship-protection-probability-of-impact-requirement

  • Like 1

ooops          forgot this...

 

another image of the FH booster test article

7L9Q6VL.jpg

 

image source

 

resembles wind tunnel mock-up model

 

ZJfbZzz.jpg

link

 

 

 

wzy8ooH.jpg

link

 

:D

  • Like 2
2 minutes ago, Draggendrop said:

ooops          forgot this...

 

another image of the FH booster test article

7L9Q6VL.jpg

 

image source

 

resembles wind tunnel mock-up model

 

ZJfbZzz.jpg

link

 

 

 

wzy8ooH.jpg

link

 

:D

That's pretty.  Would like to purchase one and sit it up in my living room.

  • Like 2

In reference to pressure hull reuse, McGregor storage

 

RzH0x36.jpg

SpaceX

 

--------------------------

 

Found some eye candy for Falcon "hold down", thought it was neat and dropped it here....

 

Link has images of moving mechanism

Falcon holddown mechanism test, 2015, Vandenburg

 

 

eDXIH93.png

Closed               

 

 

qYrCP1n.png

Open

 

 

JCSAT14-4.jpg

Pin between landing legs is the hold down points, also used for jack/chain stabilizing on ASDS

 

21048044876_d43001a370_o.jpg

FH will have 4 additional actuators for hold down.

 

:D

  • Like 2

Carbon scoring marks due to reentry. If that had been metal tears, I promise those would have been a lot longer and we'd see more of them, there would have been buckling/folding nearby as well as blowouts and breaches. In other words, we'd see a lot more damage, and SpaceX would have been forthcoming about it. :yes: 

Dunno if it is cracks, some sort of structural damage or just scoring marks (hard to tell really) ... but ... if it is damaged ....

 

DATA!!!

 

Gotta remember ... SpaceX didn't have high hopes for this thing returning in one piece ... so even if there is some sort of structural damage ... they have the whole thing to study versus bits and pieces. :)

 

  • Like 1

My guess would be an octaweb shielding degradation/burn through, of which caused increased pressure to push out those lower access panels. Probably a bit for expensive, than wanted, for a reusable...but this is what they need for data and improvements...still a massive win on the landing, particularly with the damage.

 

:D 

  • Like 2

Well, DD, you called it. Octaweb looked like it was on fire, you said ... you may have been right. There's no visible damage on the rest of the rocket, so a high-v entry could have messed with it. Could explain the "leaking and burning".

 

Would make a slightly stronger case for a Chem or Carbon Snuff system to put out any fires at landing; but it's not gonna help anything during a high-v boostback or entry. Problem is any chem or carbon is gonna clog up the Merlins ... :no: ... and that's a no-go.

  • Like 1

They will have a good jump, with the data, to button her up to better withstand the heat/pressure. She landed fine with an admirable control system. This will only get better. After all, this is stuff that is hard to simulate, one needs to do it and see what to improve.

 

This is a total win either way....she landed, under control and presented a book rack of data for the hot and fast returns.....next.....

:D

  • Like 1

Full size image

 

26428478544_2bff22971f_o.jpg

 

image link

 

This and 3 more on SpaceX flickr...

https://www.flickr.com/photos/spacex/

 

Three cores together will give an idea of FH's size......:D

  • Like 1

Yep, it landed with damage -- no idea how bad, but it's damage and it held up all the way to landing. That speaks to the robustness of the platform. :yes: 

 

1.3 Upgrades are in-progress, so this'll be one more thing to look at and improve where needed. I'm sure they're looking at the telemetry very carefully to see what happened, when and where it happened at. Among the things that are special about Falcon-9 Rockets ... they're smart. Nothing, nothing happens to them that SpaceX can't account for later on.

 

Take the failed strut last year. Think ULA could have figured that one out? Nope. Not a chance. And since then SpaceX has added more sensors, just to make sure it doesn't take that long to figure it out if it happens again.

  • Like 2
Just now, flyingskippy said:

Which lower access panels were blown out? I wasn't able to see anything on their flicker account. 

Down by the legs, two panels were off prior to landing on ASDS. The area can be seen on landing video. Apparently they were designed to come off when a pressurization occurs above the octaweb....referenced in a reddit thread...need to confirm still

:)

I just checked the vid and didn't see anything. I could be looking in the wrong area too though.  I did see a green flash after engine shutdown characteristic of the TEA-TEB ignition system. Maybe the ignition system took some damage as well. 

  • Like 1

Talking about this area right @Draggendrop?

 

Capture.JPG

 

Whereas the other barge landing looks like it had a black panel across.

 

Untitled-1.jpg

 

 

Still...phenomenal ... data ... plus they'll be able to reuse something from it. :)

 

  • Like 3
This topic is now closed to further replies.
  • Posts

    • You're absolutely right! No reason in hell these should be on the road!
    • They aren't going to want to. Most would just go with the 17 Pro and save money. Why would they want to spend $300 for basically the same thing? It's not worth it if there are hardly any changes from year to year.
    • 24H2 rolled out to the Release Preview Channel in early June 2024, so this coming a bit later in the Experimental Channel (formerly Dev) doesn't really say much more than earlier H2 releases that came out in October. I am not sure what the thinking is here by putting it in Experimental, one would think that the 26H2 stamp means features are locked down and it's now bug tested until October? I don't even pretend to understand Microsoft's strategy for Windows Insider Program though
    • Nothing Ear (a) and CMF Buds Pro 2 with active noise cancellation drop to lowest price ever by Fiza Ali With Prime Day 2026 scheduled to run from Tuesday 23 to Friday 26 June, Amazon has already begun rolling out early access offers ahead of the main event. Particularly, Nothing Ear (a) and CMF Buds Pro 2 wireless earbuds have dropped to their lowest price ever with limited Prime deal offering 33% and 24% discounts, respectively. Nothing Ear (a) are equipped with 11mm dynamic drivers featuring a PM1 + TPU diaphragm. For noise control, the earbuds offer active noise cancellation (ANC) of up to 45dB across frequencies reaching 5,000Hz. The smart ANC algorithm adapts to surrounding noise levels, while a Transparency Mode allows users to remain aware of their environment when needed. Connectivity is handled via Bluetooth 5.3, with support for AAC, SBC, and LDAC audio codecs. Additional features include IP54-rated earbuds for dust and splash resistance, paired with an IPX2-rated charging case. Furthermore, users also benefit from pinch controls, in-ear detection, Google Fast Pair, Microsoft Swift Pair, dual-device connectivity, and a low-latency mode designed for gaming and video playback. The Nothing X app unlocks a range of customisation options, including a personalised equaliser, bass enhancement, control remapping, ear tip fit testing, firmware updates, dual-device management, a Find My Earbuds feature, and low-latency mode settings. When it comes to the battery, the earbuds house a 46mAh lithium-ion battery, while the charging case contains a 500mAh cell. With ANC disabled, users can expect up to 9.5 hours of playback from the earbuds and up to 42.5 hours in total with the charging case. With ANC enabled, battery life is rated at up to 5.5 hours per charge and up to 24.5 hours combined with the case. Finally, fast charging is also supported that should provide up to 10 hours of playback from a 10-minute charge with ANC turned off. Nothing Ear (a) Wireless Earbuds (Black): $53.20 (Amazon US) - 33% The CMF Buds Pro 2 feature a dual-driver audio system consisting of an 11mm bass driver and a 6mm micro-planar tweeter. The earbuds use PU (polyurethane) and PET (polyethylene terephthalate) titanium-coated diaphragms and are tuned by Nothing to deliver balanced audio performance. They further support active noise cancellation of up to 50dB across a frequency range of up to 5,000Hz, and noise control features include a Smart ANC algorithm, Adaptive ANC, Transparency Mode, and Clear Voice Technology 2.0. For calls, the CMF Buds Pro 2 use a total of six microphones and feature an environmental noise-cancelling algorithm, Clear Voice Technology 3.0, and Wind Noise Reduction 3.0 that should improve voice clarity during conversations. Furthermore, when it comes to the connectivity, it is provided through Bluetooth 5.4. Additional features include an IP55 rating for dust and water resistance, Google Fast Pair, Microsoft Swift Pair, in-ear detection, a low-latency mode, and a Find My Earbuds function. Moreover, through the Nothing X app for Android and iOS, users can access custom EQ settings, a bass enhancement algorithm, customisable controls, Find My Earbuds, low-latency mode, dual-device connectivity, an ear tip fit test, and firmware updates. The earbuds contain a 60mAh rechargeable lithium-ion battery, while the charging case houses a 460mAh battery. A full charge of the earbuds and case via USB-C should take approximately 85 minutes, while the earbuds alone should be fully recharged in the case in around 60 minutes. Battery life is rated at up to 11 hours of playback on a single charge and up to 43 hours with the charging case when ANC is turned off. With ANC enabled, playback time is reduced to up to 6.5 hours on the earbuds and up to 26 hours with the charging case. Talk time is rated at up to 6 hours on the earbuds and 25 hours with the case with ANC disabled, or up to 4.8 hours and 18.6 hours, respectively, with ANC enabled. CMF Buds Pro 2 Wireless Earbuds (Dark Grey): $37.05 (Amazon US) - 24% Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      186
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      76
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!