My Windows 10 Mobile experience is an F-


Recommended Posts

You do you expect a huge improvement in stability in a couple of weeks?

You are using pre-release software, so you should expect the issues you are describing.

Why not grade your Windows 10 Mobile experience after the software has actually been released?

  • Like 3
You are using pre-release software, so you should expect the issues you are describing.

Why not grade your Windows 10 Mobile experience after the software has actually been released?

Because that would make just to much sense.

  • Like 3

You are using pre-release software, so you should expect the issues you are describing.

Why not grade your Windows 10 Mobile experience after the software has actually been released?

Because that would make just to much sense.

 

Since it's less than a month that Windows 10 Mobile would be release, I would expect "release candidate"- quality builds by now.

Sure, there may be minor bugs here and there, but numerous build-in apps not opening? Come on.

--------

As an analogy:

If it's a month before a building opens to the public, can you really not tell if the building is nowhere near completion?

I'm using it on a Lumia 435 and it runs perfectly fine. I went from 8.1 to the preview build and it was lagging until I did the full reset and everything's been fine since. Only thing happening is an app called "Rate Your Device" pops up as needing updated in the store and it won't install. Nothing important though so no real issue there. An ithe known issue with the storage screen not displaying everything correctly, but it's actually working fine. Just a cosmetic thing there.

You're simply trolling. Plain and simple. You have no idea at all what could be fixed betwen 10581 and RTM build so you should stop whining.

  • Like 2

 

 

Since it's less than a month that Windows 10 Mobile would be release, I would expect "release candidate"- quality builds by now.

Sure, there may be minor bugs here and there, but numerous build-in apps not opening? Come on.

--------

As an analogy:

If it's a month before a building opens to the public, can you really not tell if the building is nowhere near completion?

Your issues could very well be related to you, NOT following the directions given. Have you done a master reset yet? No? Then quit complaining about apps not working when you can't even follow a simple guideline. You keep sidestepping and ignoring useful posts, only to pick out certain ones to say "Windows 10 Mobile comes out this month" and some building comparison which doesn't even fit here. Yet you keep regurgitating it.

Since it's less than a month that Windows 10 Mobile would be release, I would expect "release candidate"- quality builds by now.

Read the other posts that were made in this topic.

Sure, there may be minor bugs here and there, but numerous build-in apps not opening? Come on.

I suspect that there are a variety of factors at play other than the build's issues. You apparently did not follow the directions, for example.

As an analogy:

If it's a month before a building opens to the public, can you really not tell if the building is nowhere near completion?

Poor analogy.

From what I understand, build 10586 is going to be the RTM version so it'll be interesting how it all plays out. That being said though a lot can change between now and then with builds coming on after to address some of the issues you are referring to.

You're the type to walk into a building that's still under construction (but, but, but 3/4 done!!) and then sue the company if a brick falls on your head.

You've been given plenty of answers to which you respond with assumptions.  Sounds like a troll thread to  me.

You're the type to walk into a building that's still under construction (but, but, but 3/4 done!!) and then sue the company if a brick falls on your head.

You've been given plenty of answers to which you respond with assumptions.  Sounds like a troll thread to  me.

Many of his/her threads come off as troll threads or just flat out made up stories. Shocker, OP has again abandoned a thread(you can see he/she is online and viewing) that went south for him/her. He/she was chiming in, replying pretty quickly with random assumptions, now nothing? No surprise there.

You're the type to walk into a building that's still under construction (but, but, but 3/4 done!!) and then sue the company if a brick falls on your head.

You've been given plenty of answers to which you respond with assumptions.  Sounds like a troll thread to  me.

It's a month before the building is set to open. The building is still 3/4 done. I am sure wondering how 1/4 of the building will be completed in a month.

From what I understand, build 10586 is going to be the RTM version so it'll be interesting how it all plays out. That being said though a lot can change between now and then with builds coming on after to address some of the issues you are referring to.

I will be on the look out for it.

You shouldn't have to do a reset once updating to 10. The early builds had some issues that a reset would fix but the goal obviously is to not have those issues.

The maps + edge issue may already be fixed. Did you ever do a reset on your 920 after the 8.0->8.1 update?

You shouldn't have to do a reset once updating to 10. The early builds had some issues that a reset would fix but the goal obviously is to not have those issues.

The maps + edge issue may already be fixed. Did you ever do a reset on your 920 after the 8.0->8.1 update?

I have never reset my phone.

I have never reset my phone.

Ok, Maps + edge issue is known and fixed. Possible the fix also fixes Calendar/Data Sense. Issue came from devices that did 8.0->8.1->10 (was actually a bug in the 8.0->8.1 update).

Reset again lol! I'm only sort-of kidding; it may solve it.  You may end up having to restore to 8.1 with the Windows Device Recovery Tool and then updating to 10 again, but this close to launch (with Insider builds possibly coming tomorrow or Thursday) I would hold off until the next build before doing that because it is such a huge PITA.  Make sure during setup after a reset that you choose to start as a new device and not to restore from a backup, too.

I went ahead and restore back to Windows Phone 8 and upgraded all the way to Windows 10 Mobile. After that, I restore my data from backup.

There is a light at the end of the tunnel after all.

Surprisingly, everything seems fast. All the built-in apps (except Store) are able to load under 5 seconds.

If anything, it seems that the Lumia 920 is very capable to running Windows 10 Mobile very well: it's just very tedious and painstaking to get there.

---

None of the Nokia apps work, but I guess they just haven't been update to be compatible with Windows 10 Mobile.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Fresh CachyOS install with Niri - I guess it's a little orange, but I'm working on it
    • FastStone Image Viewer 8.5 by Razvan Serea FastStone Image Viewer is a fast, stable, user-friendly image browser, converter and editor. It has a nice array of features that include image viewing, management, comparison, red-eye removal, emailing, resizing, cropping, retouching and color adjustments. Its innovative but intuitive full-screen mode provides quick access to EXIF information, thumbnail browser and major functionalities via hidden toolbars that pop up when your mouse touches the four edges of the screen. Other features include a high quality magnifier and a musical slideshow with 150+ transitional effects, as well as lossless JPEG transitions, drop shadow effects, image annotation, scanner support, histogram and much more. It supports all major graphic formats (BMP, JPEG, JPEG 2000, animated GIF, PNG, PCX, PSD, EPS, TIFF, WMF, ICO and TGA) and popular digital camera RAW formats (CRW, CR2, NEF, PEF, RAF, MRW, ORF, SRF, ARW, SR2, RW2 and DNG). FastStone Image Viewer features: Image browser and viewer with a familiar Windows Explorer-like user interface Support for many popular image formats and PDF viewing True Full Screen viewer with convenient image zoom support and unique fly-out menu panels Crystal-clear and customizable one-click image magnifier Powerful image editing tools: Resize/resample, rotate/flip, crop, sharpen/blur, adjust lighting/colors/curves/levels etc. Eleven re-sampling algorithms to choose from when resizing images Image color effects: gray scale, sepia, negative, Red/Green/Blue adjustment Image special effects: drop shadow, framing, bump map, sketch, oil painting, lens Draw texts, lines, highlights, rectangles, ovals and callout objects on images Clone Stamp and Healing Brush Superior red-eye effect removal/reduction with completely natural looking end result Multi-level Undo/Redo capability Single click to switch between best fit and actual size mode Image management, including file tagging, rating and drag-and-drop to copy/move/re-arrange files Histogram display with color counter feature Compare images side-by-side (up to 4 at a time) to easily cull those forgettable shots Image EXIF metadata support (plus comment editing for JPEGs) Configurable batch processing to convert/rename large or small collections of images Slideshow with 150+ transition effects and music support (MP3, WMA, WAV...) Create efficient image attachments for emailing to family and friends Print images with full page-layout control Create fully configurable contact sheets Create memorable artistic image montages from your family photos for personalized desktop wallpapers (Wallpaper Anywhere) Acquire images from scanners. Support batch scanning to PDF, TIFF, JPEG and PNG Versatile screen capture capability Powerful Save As interface to compare image quality and control generated file size Run favorite external editors with one keystroke from within Image Viewer Offer portable version of the program which can be run from a removable storage device Configurable mouse wheel support Support themes (bright, gray and dark) Support dual-monitor configurations Support touch interface (tap, swipe, pinch) Support dual instances Play video and audio files (Third party codecs may be required for old versions of Windows) And much more... FastStone Image Viewer 8.5 changelog: Added support for SVG format Added Start importing automatically and Handle duplicate file names automatically options to the Import Photos and Videos tool WebP files can now be rotated and saved with a single click Enhanced dark theme support in the PDF viewer Fixed a bug where some links in PDF files were not clickable Other improvements and bug fixes Download: FastStone Image Viewer 8.5 | Portable | ~15.0 MB (Freeware) View: FastStone Image Viewer Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yup, broke my comp… again. its times like this when I regret AMD. This just never happens on NV.
    • Huh? You're delusional calling the Steam Deck dead. It is so successful that it has sold out multiple times. Even after the price hike this year it sold out again with 24 hours of being back in stock. The demand is real and has not died down even after four years.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      160
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      85
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!