Recommended Posts

If it occurred at SF-8 min it can't have been fully fueled and pressurized. 

 

The discussion is moving to a problem in the strongback RP-1 line, umbilical, the connector or a strongback hydraulic line. A leak in any can result in a hydrocarbon  aerosol. Added to the GOX boiloff and you have a fuel-air explosive looking for an excuse to go boom.

 

Also,

 

China lost a rocket this week so they'll be investigating.

Proton is standing down to investigate an S2 anomaly

Arians 5 is booked through 2017

Also, ex-NASA and now SpaceX uber-engineer John Muratore is lead for prepping 39A. No doubt he'll be up to his elbows on LC-40 rehab.

 

SpaceX investigation updates....

 

Quote

>
Overview of the incident:

- Yesterday, at SpaceX's Launch Complex 40 at Cape Canaveral Air Force Station, an anomaly took place about eight minutes in advance of a scheduled test firing of a Falcon 9 rocket.

- The anomaly on the pad resulted in the loss of the vehicle.

- This was part of a standard pre-launch static fire to demonstrate the health of the vehicle prior to an eventual launch. 

- At the time of the loss, the launch vehicle was vertical and in the process of being fueled for the test.  At this time, the data indicates the anomaly originated around the upper stage liquid oxygen tank.  Per standard operating procedure, all personnel were clear of the pad.  There were no injuries.

To identify the root cause of the anomaly, SpaceX began its investigation immediately after the loss, consistent with accident investigation plans prepared for such a contingency.  These plans include the preservation of all possible evidence and the assembly of an Accident Investigation Team, with oversight by the Federal Aviation Administration and participation by NASA, the United States Air Force and other industry experts.  We are currently in the early process of reviewing approximately 3000 channels of telemetry and video data covering a time period of just 35-55 milliseconds. 

As for the Launch Pad itself, our teams are now investigating the status of SLC-40.  The pad clearly incurred damage, but the scope has yet to be fully determined.  We will share more data as it becomes available.
>

 

Moving to LC-39A

 

Link....

 

Quote

>
With its launch pad likely facing major repairs, SpaceX said it would use a second Florida site, called 39A, which is located a few miles north at NASAs Kennedy Space Center and was used for space shuttle missions.

The pad is on schedule to be operational in November, SpaceX said. The company had planned to use the pad for the first time later this year for a test flight of its new Falcon Heavy rocket.
>

  • Like 2

Any word on why the payload was attached?  Is that (or was that) normal SOP?  I understand test firings ... though I'm curious why test firings occur with the payload in case something like this happens.

 

Also...is it normal SOP for the upper stage to be loaded with fuel for the first stage test?  Just seems like a lot of loading/unloading of propellent (regarding the upper stage).  But...what do I know...I'm medical. :) 

  • Like 1

~12 days from WTF? to scheduling RTF...that was quick.

 

@pbdes (Space News)
SpaceX President Shotwell: We anticipate return to flight in November, meaning down for three months. Next flight from CCAFS, then to VAFB.

 

@pbdes (Space News)
SpaceX's Shotwell: We have been told that the Sept. 1 anomaly will not affect Falcon 9's insurance rates. So we expect no impact.

 

@pbdes (Space News)
SpaceX's Shotwell: Falcon Heavy wont launch this year, likely Q1 next year. Could be from Pad 39A or from VAFB, not sure.

 

Edited by DocM
  • Like 1
2 hours ago, DocM said:

~12 days from WTF? to scheduling RTF...that was quick.

 

@pbdes (Space News)
SpaceX President Shotwell: We anticipate return to flight in November, meaning down for three months. Next flight from CCAFS, then to VAFB.

 

@pbdes (Space News)
SpaceX's Shotwell: We have been told that the Sept. 1 anomaly will not affect Falcon 9's insurance rates. So we expect no impact.

 

@pbdes (Space News)
SpaceX's Shotwell: Falcon Heavy wont launch this year, likely Q1 next year. Could be from Pad 39A or from VAFB, not sure.

 

Where was this information coming from, do you know? They've very sporadic, not sure if this is an interview or what?

With some SpaceX input...check out the design influence...

 

MARS: Trailer #2

video is 1:43 min.

 

 

 

and

 

MARS: Trailer #1

video is 0:30 min.

 

 

 

‘Mars’: Behind the Scenes of National Geographic Channel’s Global Event Series

https://www.yahoo.com/tv/mars-national-geographic-channel-premiere-date-144321018.html

 

Quote

Still, Wilkes’s favorite location was the Hawthorne, Calif., offices of SpaceX. “Just because what they’re doing is so exciting, and there’s aspects of SpaceX that they’ve historically never allowed an outside crew in to document that we were granted access to,” he says. “Just seeing the energy and enthusiasm on their factory floor is something that I think very few people have seen unless you have the pleasure of actually getting to go there. It harkens back to, I don’t want to say the ‘glory days of space,’ because I’m hoping that we’re back in the glory days, but even going back to the ’60s, where there was just this excitement around the Apollo program, and all the best and the brightest were coming out of universities to work at NASA. That sort of fell off a bit, as we just got stuck, as Elon likes to say, in low Earth orbit. And when you go to SpaceX, you see an age range from 20-year-olds up to 60-year-olds, and people who are clearly the best and brightest out of MIT, and Caltech, and all the great science schools. You also see the slightly more seasoned, probably former NASA or government contractor types walking around. They’re all just intermingling on the factory floor, and they’re building rockets, and Elon’s desk is in the middle of all of it, so it has this mix of being a sort of tech Silicon Valley startup, and, at the same time, they’re building rockets on the same factory floor. I think that’s going to be an exciting thing for people to see.”

:D

  • Like 2

MARS-Daedelus-3.jpgThe design of the Daedalus spacecraft in MARS is similar to a biconic side-entry BFS concept outside engineers have discussed in general layout, but not the details or scale.  Lots of artistic license there.

The biconic has the heat shield along its side to minimize heat loading per m^3 and enters like the Shuttle, but it rotates to vertical for the landing. The rear flipperon would be used to protect the engines during re-entry and as an elevator. Sometimes these are split into 2 flipperons which are independently moveable for additional directional control. Flipperons have been used on ESA's IXV vehicle, Blue Origin's SV orbital capsule and the Russian Kliper concept. Multiple engines for engine out capability. 

 

ESA's IXV shows both the biconic concept and shows split flipperons.

 

IXV_large.jpg

 

We'll see how close it is.

National Geographic graphics
MARS-Daedelus-1.jpg

 

MARS-Daedelus-4.jpg

 

MARS-Daedelus-2.jpg

 

MARS-Daedelus-3.jpg

Edited by DocM
  • Like 2

Actually, I'm curious to know if the flame trench at SLC-40 can handle Falcon Heavy. If so, this is an opportunity. A new strong back such as the one at 39A could be used and the hanger can already fit 3 cores. This would be great for the 5+ tonne lifts.

 

Have to find the silver lining from tragedy.

 

:)

  • Like 1
57 minutes ago, Draggendrop said:

Actually, I'm curious to know if the flame trench at SLC-40 can handle Falcon Heavy. If so, this is an opportunity. A new strong back such as the one at 39A could be used and the hanger can already fit 3 cores. This would be great for the 5+ tonne lifts.

 

Have to find the silver lining from tragedy.

 

:)

No. Part of the Titan triple flame duct is concreted and it would cost too much to clear it out.

 

There is a plan to add a new second pad on LC-40, giving them LC-40A and LC-40B (for FH), but that's down the road.  Fixing LC-40(A), getting LC-39A ready, and Boca Chica have priority.

  • Like 1

I doubt it, even with upgrades. It'll take a 39-A type of Pad, and the clearance of all of the "stuff" and the reinforced superstructure to deal with the "oomph". So, no. Probably not.

  • Like 1

There's room. The new hangar has to be 90° or 180° to the existing hangar and a new flame trench, mount, ramp and access roads built (+infrastructure taps.)  Pure guess, but I'd be looking for a draft EIS sometime after Boca Chica opens.

  • Like 2

Most recent SpaceX financial info I can find.

 

The Information...

 

>


SpaceX shares recently sold at a price 24% higher than the last fundraising round, a securities filing by Fidelity Investments indicates, a price that would value the firm at close to $15 billion. It suggests that SpaceX shares have continued to rise in the secondary market and likely explains why Fidelity marked up its stake in the company to that level in February.

 

We reported in April that Fidelity had marked up its stake in SpaceX to $96.42 a share in February, which is the equivalent of about $15 billion for the whole company...
>

  • Like 1
This topic is now closed to further replies.
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for. The fact that the CPU is a "cellphone", sorry mobile phone processor is irrelevant. It's about the experience, and so far, that sounds quite solid.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      578
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      72
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!