White lines and low quality printing with a new Brother HL-3170CDW laser printer


Recommended Posts

Printer model: Brother HL-3170CDW (Laser printer)

Firmware version: 1.01

Connection: WiFi

Current OS: Win 10, OS X Sierra

 

I just hooked it up and all the prints I've tried have vertical & horizontal grayish \ white lines.

I've attached an album: Imgur

The first image is the actual sky image, the second is a print of those sky. The other two are demo prints, you can clearly see vertical lines on all of them. On an actual image print it looks a lot worse than on a print of a solid color like in the demos.

So far I tried installing new drivers, different OS's, calibrating color from the printer and driver, changing print quality from the driver.

 

Can anyone tell me where's the problem?

The best help you can get about that is from Brother's support...

 

I'm not a printer guru, but your header might be bad. just my 2 cents.

On 10/13/2016 at 10:50 PM, Mindovermaster said:

The best help you can get about that is from Brother's support...

 

I'm not a printer guru, but your header might be bad. just my 2 cents.

Thanks, I'll contact them on Monday. What do you mean by "header" ?

But you didn't update the firmware?  I have that same printer, and the current firmware is

 

Maintenance Information

Node Information

Model Name Brother HL-3170CDW series

Serial no. U63478(snipped)

Main Firmware Version 1.27

Sub1 Firmware Version 1.05

Memory Size 128MB

 

There is not really a print head in laser printer..  So its not that.. My guess would be toner cart is low or empty or just bad.  Did you try taking the towner out and rocking it back and forth?  Your pickup roller could be dirty as well or just some dirt in your paper path?  I agree though your best best is to connect their support.  I have had mine for a few years now and have no such issue.

Thanks @BudMan

 

I'll try playing with the toner now.

I thought about returning it thinking that that model is faulty in general. Glad that's not the case.

Is there a chance you have a photo of a color printed page you can upload so I can also print it and compare? It would be a lot easier if I could present a print with "this is how it suppose to look" to the store I bought it from.

 

Edit: My firmware is 1.27 & 1.05, In the first post I took the numbers from the driver, I now checked the actual printer.

 

Edited by Shasoosh

you just want a pic of the test page?

 

Well took a pic with my phone of the demo and test print pages.. Clearly there is no streaks.

 

 

IMG_2880.JPG

 

I have been really happy with it.. This dec will be 3 years and still on original carts.  Black is getting low at 10% but colors are still at 40%.  I don't do all that much printing.  But when I do its fast, and the printer really uses like no power sitting there idle in sleep mode.  But when you print it wakes up really fast and you have your page(s) in a few sec.  Other than the size it makes for a great home printer if you ask me.  It is a bit larger than your typical inkjet, etc.  When its time for more ink I might give it to my son and let him buy the ink ;)  And just git myself something new.. Using new tech, etc.  I wouldn't mind getting rid of my old flatbed scanner and making some room on my desk and getting new color laser with scanner built in, etc.

Thanks @BudMan

Actually I was hoping for a picture pic if you have one laying around (for example: http://wallpapersdsc.net/wp-content/uploads/2016/09/Blue-Flower-HD.jpg ) as it's really hard for me to see those lines from the demo print

I totally understand if you're low on ink and prefer not to. 

 

Btw, from what I've read on that printer, sometimes the ink indicator says low on ink but actually there's a lot more in there so reseting the toner get a lot more prints out of a "need to replace" one. Worth a shot.

Ok printing that image.. You do understand its not a photo printer right..  It's a laser printer - not going to give you photo quality prints..

IMG_2882.JPG

 

How long you think that print would of taken with a "photo" printer??  With the laser it was printed in just a couple of seconds.  I what your after is photo quality printing then a laser is not what your after.

 

printissues.jpg

 

From your examples of your demo print I can clearly see lines in your color boxes.  I do not see any of those in my demo print..

3 hours ago, BudMan said:

But you didn't update the firmware?  I have that same printer, and the current firmware is

 

Maintenance Information

Node Information

Model Name Brother HL-3170CDW series

Serial no. U63478(snipped)

Main Firmware Version 1.27

Sub1 Firmware Version 1.05

Memory Size 128MB

 

There is not really a print head in laser printer..  So its not that.. My guess would be toner cart is low or empty or just bad.  Did you try taking the towner out and rocking it back and forth?  Your pickup roller could be dirty as well or just some dirt in your paper path?  I agree though your best best is to connect their support.  I have had mine for a few years now and have no such issue.

I was just about to mention, shake the toner cartridge! Some particles may have settled during warehouse storage. (DON'T TURN IT UPSIDE DOWN! JUST TAKE IT OUT, SHAKE IT, AND ROLL THE ROLLER A FEW TIMES. DON'T RUIN YOUR CLOTHES, lol!) Remember: hands are washable, and you can get the toner off relatively easy. It's not so easy on clothes, so if you do shake it, do it cautiously)

  • Like 1

Laser printer is great for printing everyday stuff, stuff for your kids school, work reports with graphs, etc., flyers and such.  Recipes, etc. etc.  Great for doing paper crafts with my granddaughter and heavy paper (card stock) But if what you want is to print out some photos to hang on the wall etc..  Then no the quality going to suck for that..  Either just order them at your local drug store walgreens, cvs, target, walmart and have them mailed to you or pick them up.  If we need a photo we just upload it to the corner walgreens and can pick it up in less than an hour for like 10 cents a print.

 

Makes no sense to me to have a photo printer when I can have great prints for a few pennies in less than hour.  Any size - and I didn't have to buy ink, paper or printer..
 

Thanks guys and thanks a lot for that print @BudMan, That was really cool of you.

 

I do understand that that's not a photo printer but printing a photo helped me distinguish between the quality of the printer or a problem with the printer. I do suspect that my blue and black toners are faulty. 

 

I did a few more tests and found another problem, not sure it's the printer fault this time. As one that owns that same printer, I'd love to hear your take on this one too.

 

 

5 hours ago, Obi-Wan Kenobi said:

I was just about to mention, shake the toner cartridge! Some particles may have settled during warehouse storage. (DON'T TURN IT UPSIDE DOWN! JUST TAKE IT OUT, SHAKE IT, AND ROLL THE ROLLER A FEW TIMES. DON'T RUIN YOUR CLOTHES, lol!) Remember: hands are washable, and you can get the toner off relatively easy. It's not so easy on clothes, so if you do shake it, do it cautiously)

Yeah, I did that before... :/

 

12 minutes ago, Mindovermaster said:

Yeah, I did that before... :/

 

Man, me too! Ruined my whole uniform! Hard lesson learned!

looks like a dirty image transfer drum/fuser unit to me (may look like a big metallic roller) they can get charged up and toner/paper dust particles can stick to it, esp if transported recently.

  • 6 months later...
3 hours ago, Hhhhhhugo said:

Hi all, I have exactly the same problem than  Shasoosh user. Did you solved the problem? Thank you!

Hello and welcome to Neowin.

 

I would recommend creating a new topic with a description of your problem, including as much detail as possible to aid in helping you with a solution.

  • DrunknMunky locked this topic
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I've been on Deezer for over a decade, but glad that Tidal joined them in fighting AI slop. Can't stand such takes as Spotify's: "Spotify's CEO recently pushed back against listeners who call AI music "slop," urging people to stop using the term and instead embrace the creative potential of AI music."
    • “Could” … in the IS the healthcare is run by insurance companies that make indecent profits denying basic treatments to people that are paying money for nothing. Besides, where are all the Trump epigones who were stating that the tariffs were going to paid by foreign companies and not the US citizens? …
    • Microsoft Teams gets smarter at spotting sneaky meeting bots by Usama Jawad Microsoft Teams is set to receive a couple of new features soon, including a dedicated Recap app and a rather controversial location tracking functionality. The Redmond tech giant has also explained how it has made online communication and collaboration a lot more performant this year. Now, the company has detailed more secure bot admission mechanisms, as first reported by us in March 2026, and now available in Teams. As the use of AI has expanded across enterprise environments, Microsoft has begun allowing users to integrate bots into their meetings for various tasks, such as note-taking. While this has a tangible productivity benefit for users, Microsoft has highlighted how misconfiguration has allowed bots to join meetings that they shouldn't. This has created security and privacy risks, which Microsoft is now combating using a new Teams admin policy that allows organizers to control how external bots access meetings. Admins can leverage a policy called Manage external bots and their access to meetings. The default configuration is "When detected, require approval before joining", which places detected bots in a lobby before they are explicitly admitted into the meeting. The other option disables the experience. Microsoft has also requested admins to only allow organizers and co-organizers to manage access to a meeting, so that other people don't randomly allow bots into meetings. Teams will now be able to leverage infrastructure signals to intelligently detect and distinguish between bots and humans. Microsoft will soon also trial a registration experience for independent software vendors (ISVs) to build a system that registers a bot with Microsoft, so it is marked as a "known" bot. Teams will also categorize bots as trusted and suspected threats so that organizers can quickly identify which bots they want to allow into a meeting. Additional safeguards to block accidental admission of a bot into a meeting include: No one-click Admit option for identified bots Confirmation prompts when admitting participants that include bots Warnings when organizers choose Admit all, and bots are included Microsoft has begun rolling out this experience, and it will be retiring the current CAPTCHA verification implementation. In the future, the company plans to roll out new capabilities like allow-lists, organization-wide policies, admin reports, audit logs, and more granular controls.
    • With the current hardware prices Microsoft should lift the restriction. Then if you have the correct TPM then allow you to use X feature, if you don't have the correct TPM then don't but still actually let you run windows. 11. With a disclaimer during install that X features would be unavailable.
    • It's good for recycling of course. But commence inflation of a second hand RAM bubble and price gouging on DDR 4 inventory in 3... 2... 1...
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      538
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!