Recommended Posts

StarLink uses a phased array antenna, like a fighters radar. Phased arrays are flat and can be electronically aimed, so a flat pizza box on your roof or a higher gain smaller array on your (car/plane/train)'s roof, on a pole or patio/porch with a solar panel can & bttery, can be the receiver. 

 

A high speed WiFi does the last leg. 20-30 satellites will be visible at any time, so obstructions like a tree or nasty cloud will be much less of a problem vs a regular dish. Phased array chips up to 4" are becoming available, so a small box like today's  portable 4G LTE boxes should be on the short list too but they'd be much faster.

 

Community mini-ISP's are going to become a LOT easier too.

Edited by DocM
  • 2 weeks later...


http://m.aviationweek.com/space/europe-accelerates-studies-reusable-launchers

 

Europe Accelerates Studies On Reusable Launchers


>
The launch of SpaceX’s Falcon Heavy, although it was of limited significance on the satellite launch market, was the watershed event. Before it, European players were content with reusability demonstration programs, just as any other research and technology activity. After it, the debate moved to “when” from “if.” For the second time in four years, ArianeGroup, ESA and state agencies made a move in reaction to SpaceX’s prowess in reusable launchers.
>
"Reusing the booster [the launcher’s first stage], that's for tomorrow, not the day after tomorrow," Chairman Eric Trappier said April 12.

But the first indications of a change of heart came just after the near-perfect execution of the Falcon Heavy’s mission on Feb. 6. Five days later, ESA Director General Jan Woerner wrote on his ESA blog, "The world has moved on and . . . requires that we reassess the situation." 
>

  • Like 1
15 minutes ago, DocM said:

"Reusing the booster [the launcher’s first stage], that's for tomorrow, not the day after tomorrow," Chairman Eric Trappier said April 12.

Dude should have said that reusing the booster was yesterday... And that they are slacking it up hard in Europe. 

  • Like 2

:yes: ... and they have no idea what else SpaceX will be up to by then. Satellite manufacturing, PV/Solar Farms (oh yes, there will be Solar Farms) using the storage banks, Hyperloop, etc, ... all part of "the larger plan" that Musk & Co. have in mind.

 

If it were anyone else I'd be suspicious. Musk has proven that his intentions are only to improve everybody's quality of life and to advance humanity. He's an ace as far as I'm concerned, and I'll support those endeavours any way I can. :D 

Sounds like the cancelled Resource Prospector instruments will fly on other lunar missions, leveraging commercial and international partners.

 

The human lander capability has one obvious candidate ;)

 

 

Quote

Resource Prospector

 

April 27, 2018 - Update

NASA is developing an exploration strategy to meet the agency’s expanded lunar exploration goals. Consistent with this strategy, NASA is planning a series of progressive robotic missions to the lunar surface. In addition, NASA has released a request for information on approaches to evolve progressively larger landers leading to an eventual human lander capability. As part of this expanded campaign, selected instruments from Resource Prospector will be landed and flown on the Moon. This exploration campaign reinforces Space Policy Directive 1, which calls for an innovative and sustainable program of exploration with commercial and international partners to enable human expansion across the solar system, including returning humans to the Moon for long-term exploration.
>

 

Edited by DocM
  • Like 1

Oh boy. That's not gonna go well for ULA if they end up in a long, protracted dispute with their Unionized workforce.

 

ULA cut a bunch of those jobs in the past few years .. and Unions never, ever forget and rarely forgive.

 

Yeesh ...

ULA strike,

 

Total employees: 2,500

Striking, 

308 in Decatur
~230 at Cape Canaveral
~70 at Vandenberg

Big issue: ULA outsourcing work to save money. Also too much OT, work related travel, and get this - "forced" training. 

ISTM most other workers would kill to get employer provided training to increase their skills.

ULA's next launch is July, with the next Cygnus riding an Antares out of Wallops instead of an Atlas V. Where it may really hurt is moving Vulcan-Centaur 5 to the right. 

  • Like 1

Wow ... I don't see a problem here either. Lots of overtime + employer-initiated training = much more capable employee base. And it's far more likely that's the reason ULA is outsourcing the work -- giving their employees some breathing space. They are already doing lots of OT.

 

Yeah, I don't get it. ULA's people are paid extremely well. OT turns that already good pay into fantastic pay.

 

No reason at all to have a Strike about it.

It depends on the requirement for OT, if they say you have to do OT, compared to being offered OT. Most of us have lives to live, family and partners to spend time with, if you are doing too much OT, then it can get difficult.

 

The training is great i wish my work supplied/paid for training, but we dont have the facts, is it that they need to do a training course out side of work hours and need to pay for it themselves. 

 

Im not a union type of person, but unless you have more details its hard to say who is in the right. My usual stance is that "if your going to put enough effort in to Strike, go get a new job"

Now it plays out; 

 

Rogozin is making a horizontal move from VPM of Defense to the head of Roscosmos.

 

https://www.rbc.ru/politics/14/05/2018/5af5ab6a9a79477b78097533?from=main

 

Rogozin was offered to head Roskosmos



Dmitry Rogozin can lead Roskosmos with the prospect of its reorganization into a rocket and space holding company. The creation of a new structure is an initiative of the former vice-premier who oversaw the defense industry

Space offer

And about. Deputy Prime Minister Dmitry Rogozin, who will not join the new government, offered to head Roskosmos with the prospect of creating a rocket and space holding company on its basis. About this RBC told a source close to the Kremlin, and confirmed interlocutor in the Ministry of Defense and a source surrounded by Rogozin.

"There were two main options for further employment of Rogozin: in the Kremlin, while talking about the position of an assistant or adviser to the president, or heading a rocket and space holding company, which is planned to create," - said a source close to the Kremlin. According to him, a preliminary decision on one of the options has already been made. At the same time, he was at a loss to answer which specific position he was talking about.

"Rogozin is planned to transfer to Roskosmos, which expects a great deal of reform," a source in an official's circle told RBC.
>


 
  • Thanks 1

Makes sense. He's going to stick to what's familiar and what he's good at. And Roscosmos does need a shake-up, as does the rest of the Russian Space Industry.

 

Relying on legacy hardware, as good as it is, won't get them where they need to be ten or twenty years from now. Even the Angara platform is using a lot of that legacy hardware. So is their Federation platform, it's about 50% legacy stuff on the top end with about 80% on the bottom end.

 

And please understand, everyone, I have nothing against legacy hardware. If it works, it works and I've got no complaints with it most of the time. But there are usually ways to upgrade and modernize. As an Engineer I'm always looking for ways to improve a system in one way or another. :yes:

Oh, brother....Alain Charmeau, ArianeSpace's CEO, is losin' it over SpaceX and Blue Origin.

 

The linked interview translation on Reddit is wild. Launch rate is biting ArianeSpace in the ass,

 

From Der Spiegel,

 

Quote


Charmeau: ...and we need seven contracts for guaranteed launches by the end of June.
>
SPIEGEL ONLINE: What happens if you do not have the contracts by the end of June?

Charmeau: Without contracts, we will have to halt the production.

 

ARS...

 

Quote


Ariane chief seems frustrated with SpaceX for driving down launch costs

I cannot tell my teams: 'Goodbye, see you next year!'
>
<history of the situation>
>
With this background in mind, the chief executive of Ariane Group, Alain Charmeau, gave an interview to the German publication Der Spiegel. The interview was published in German, but a credible translation can be found here. During the interview, Charmeau expressed frustration with SpaceX and attributed its success to subsidized launches for the US government.
>
"SpaceX is charging the US government 100 million dollar per launch, but launches for European customers are much cheaper." Essentially, he says, launches for the US military and NASA are subsidizing SpaceX's commercial launch business.

However, the pay-for-service prices that SpaceX offers to the US Department of Defense for spy satellites and cargo and crew launches for NASA are below those of what other launch companies charge. 

>
>
"Let us say we had ten guaranteed launches per year in Europe and we had a rocket which we can use ten timeswe would build exactly one rocket per year," he said. "That makes no sense. I cannot tell my teams: 'Goodbye, see you next year!'"
>
This seems a moment of real irony. Whereas earlier in the interview Charmeau accuses the US government of subsidizing SpaceX, a few minutes later he says the Ariane Group can't make a reusable rocket because it would be too efficient. 
>

Read it via NSF already, funny guy, lol. Totally disconnected from reality if you ask me, completely skipping over the fact that the US government often has a pile of additional requirements that cost money. Not to mention the fact that most of the time there is also this silly Dragon thing plus handling in the package, lol. 

Prime example of OldSpace thinking that cannot wrap its' collective head around NewSpace thinking ... and it'll be the death of them if they don't adapt.

 

And it appears they are incapable of adaptation ...

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • PDF-XChange Editor 11.0.1.0 by Razvan Serea PDF-XChange Editor is a comprehensive PDF editor that allows you to create, view, edit, annotate, and digitally sign PDF documents with ease. With advanced features like OCR, document security, and PDF optimization, PDF-XChange Editor is a powerful tool for both personal and professional use. Whether you need to edit text, images, or links, or add comments, stamps, or watermarks, PDF-XChange Editor provides all the necessary tools to make your PDFs look perfect. Additionally, it supports a wide range of file formats, including PDF, XPS, and DOCX, making it easy to convert and share your documents. PDF-XChange Editor key features: Edit text and images in PDF documents Add and remove pages from PDF files Annotate and markup PDFs with comments, highlights, and stamps Use OCR to convert scanned documents into searchable text Create and fill out PDF forms Sign and certify PDF documents digitally Add and edit hyperlinks within PDFs Extract text and images from PDF files Batch process multiple PDF files at once Customize the interface to your preferences Work with multiple documents in tabs Convert PDFs to other formats such as Word, Excel, and HTML Use advanced redaction tools to permanently remove sensitive information Add customizable headers and footers to PDFs Merge multiple PDF documents into a single file Split PDF documents into multiple files Add watermarks to PDF documents Use the measurement tools to calculate distances and areas in PDFs ....and much more PDF-XChange Editor 11.0.1.0 changelog: Fixed a crash in the new Open/Save dialog box when creating a new folder in an unavailable network path. (49552) Fixed a rare/infrequent crash on some dynamic XFA forms after changing their field values. [installer] Fixed an issue where shortcuts were lost during an upgrade from the previous version. [installer] Fixed an issue preventing migration of serial keys during updates from version 10. Fixed the issues with the shell context menu after installation of version 11. Fixed the issue with filtering comments. (49478) Fixed the issue that caused "Error [IO subsystem]: Invalid access mode." when converting PDFs to MS Office formats. Fixed an issue with the context menu position on some multi-monitor systems. (48467) Fixed an issue with handling complex custom file filters, displayed by JS, in the new Open/Save Files dialog box. (49486) Fixed several issues with the new 'Select Folder' dialog box. (49505) Fixed an issue with the new custom 'Open File' dialog box when using double-click to open it. (49498) Fixed an 'infinite' loop/proliferation in the 'Open Files' and 'Manage Places' dialog boxes. (49526) Fixed an issue with handling the mouse wheel inside the document "Find" box. (49539) Fixed an incorrect behaviour in the 'Go back (Alt+Left)' button in the new Open/Save Files dialog box. (49510) Fixed an issue with the shortcut keys (Alt+Left/Right) after navigating via breadcrumb paths in the new Open/Save Files dialog box. (49554) [installer] Fixed an issue with redrawing the progress text in the EXE installers. Fixed the issue where a mouse click outside of the polyline/polygon context menu during annotation creation would cancel the annotation. (49475) We switched back to using the system Open/Save/SelectFolder dialog box by default, instead of using the new one, because some popular features such as the QuickAccess/Recent items are missing in the new version. These will be added in a future release. Replaced the 'Extension' column in the new Open/Save File dialog box with a more user-friendly 'Type' column. Also fixed some issues when handling the 'Show file extension' option. (49497) Added the ability to authenticate local network shares in the new Open/Save Files dialog box. (49557) Improved the handling of dates after 01.01.2030 in XFA files - now such dates are stored properly when set via the dropdown widget. Flags NoZoom and NoRotate are now respected for only a limited subset of annotations. Download: PDF-XChange Editor (64-bit) | Portable ~300.0 MB (Shareware) Download: PDF-XChange Editor (32-bit) | Portable ~200.0 MB Download: PDF-XChange ARM64 | 276.0 MB Download: PDF-XChange Portable @PortableApps.com | 97.0 MB View: PDF-XChange Editor Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Still 3x what it should cost. So, it seems the trick is to increase price by 6x so that a reduction in price back to 4x looks like a steal. "You savvy shoppers win again!" I'm glad I'm not in a desperate spot to actually even need this overpriced crap. Hopefully, it comes back down by the time for when (or if) I ever do.
    • Although AI is great and has it's use cases they likely have massively overhyped it and it has not delivered as per their expectations. I fully expect them to start saying the same things again when it does get to a certain level of intelligence!
    • Microsoft wants to end printer driver headaches with Windows Ready Print by Usama Jawad A few days ago, Microsoft released Windows 11 Experimental build 26300.8553, bringing a ton of enhancements such as Start menu customization, search improvements, Taskbar polish, and other minor UI tweaks. Another relatively major enhancement snuck deep within the change log was related to upgrades to the Windows printing experience. Now, Microsoft has shared more details about these benefits. For starters, Microsoft has renamed its Modern Print Platform to Windows Ready Print. The company believes that this name highlights its shift in strategy, which now focuses on modernizing, securing, and streamlining the printing experience for Windows devices. Some of the upgrades present in Windows Ready Print have already been seeded to customers and partners. This includes ending support for third-party printer drivers via Windows Update and transitioning towards the Internet Printing Protocol (IPP) and the native Windows IPP printer driver. In line with these changes, new printer installations will default to Windows Ready Print on eligible devices starting from July 2026. However, Microsoft recognizes that not all environments will be able to migrate to this platform immediately, so it will allow users to choose between installing the printer via Windows Ready Print or the traditional OEM process. Users will be able to toggle this configuration through Settings > Bluetooth & Devices > Printers & Scanners > Printer preferences. This control applies only to new printer installations, and its functionality can also be modified via Group Policy as follows: Launch Group Policy Editor Navigate to Local Computer Policy -> Administrative Templates -> Printers Find and select 'Configure Windows Ready Print driver ranking' -> double click to open it Select 'Enabled' (if you wish to enable Windows Ready Print driver selection) or 'Disabled' (if you wish to explicitly disable Windows Ready Print driver selection). Select Apply Select OK Similarly, if you set up Windows protected print mode through the same setting in Windows 11, it will also default to using Windows Ready Print exclusively. Microsoft hopes that these improvements will help eradicate dependency on OEM-specific driver installation processes and simplify printer installations. We'll likely find out more about other tangible benefits in the coming months.
  • Recent Achievements

    • One Month Later
      johnjacobb40 earned a badge
      One Month Later
    • One Year In
      Primer1st earned a badge
      One Year In
    • Experienced
      JayZJay went up a rank
      Experienced
    • Reacting Well
      Sir_Timbit earned a badge
      Reacting Well
    • Week One Done
      rubentuben8 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      PsYcHoKiLLa
      231
    3. 3
      +Edouard
      138
    4. 4
      ATLien_0
      87
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!