Recommended Posts

6 minutes ago, PaulRocket said:

Apparently Falcon 9 Block 5 will feature an inconel heat shield:

https://forum.nasaspaceflight.com/index.php?topic=39167.msg1719169#msg1719169

 

Has this ever been done before? What are the implications?

The X-15 skin was Inconel X ... I believe the shuttle used Inconel studs on the SRBs (not sure about the studs between the shuttle and ET), the Saturn's first stage engine thrust chambers were Inconel as are the Merlin's manifolds.  

 

Anyway ... I would suspect that this may allow the first stage to come in a lot hotter and/or allow for faster turnaround times?  (Purely speculation).

Interesting material ... lots of high-temp uses, and it's better all-around than Titanium when heated. It's great stuff. There are other uses for it too -- many of the newer uses are "embargoed", though. Many, many iterations of Iconnel going back a long time that have different properties for different applications. That's why it's an "Icon". :yes: 

The main post on the bottom of my leg  prosthesis is a:pp made of an  Inconel variant. Strong, corrosion-resistant, etc. Tesla also uses an Inconel protective shield for their car batteries. Plenty of collision resistance.

 

Metallic heat shields have been used before, X-15  being one example.  Some of them quite exotic, such as those which use thorium alloys - which has a side effect of being slightly radioactive. Others are made of metallic ceramics. These tiles are usually mounted on standoffs which hold them above from the less thermally resistant  airframe.

 

Block 5's Inconel heat shields will probably replace those ablatives made of cork and SPAM* around the Octaweb.

 

* SpaceX Proprietary Ablative Material, which is used as the outer shell of Dragon, Dragon 2 and elsewhere.

Edited by DocM
  • Like 1

Yep, I agree. Replacing the "consumables" with resistant materials at this point will do wonders for reuse and turnaround times. :yes: It'll go from 1~3 months to a little under two weeks or less. Probably less. 

Falcon 9 failed landing demo reel. Note the F9R Dev-1 in-flight abort is in there under failed engine sensor.

 

 "Failure is an option here. If things are not failing, you are not innovating enough."

~~Elon Musk (recently paraphrased by a USAF General before Congress)

 

 

  • Like 2
EDIT: Whoops forgot to refresh before posting! Sorry @DocM
 
It's really good to see they can post things like this without people losing faith as it's been proven time after time that each of these was a lesson.

 

24 minutes ago, DocM said:

Falcon 9 failed landing demo reel. Note the F9R Dev-1 in-flight abort is in there under failed engine sensor.

 

 "Failure is an option here. If things are not failing, you are not innovating enough."

~~Elon Musk (recently paraphrased by a USAF General before Congress)

<snipped>

Ah, the CRS-6 landing! With the little thruster that could. Bless it, it tried so hard!

14 minutes ago, John. said:

Sorry for wall of posts, full version of "How NOT to land an orbital rocket booster" is available here: 

 

I love the music and commentary - "It's not an explosion, it's just a rapid unscheduled disassembly"

 

The stuff these guys are doing is simply phenomenal 

  • Like 3

A government launch right out of the gate. This would put it in the April to June window.

 

COSMIC = Constellation Observing System for Meteorology, Ionosphere and Climate, a joint venture between Taiwan and the US via NASA (JPL) and NOAA

 

 

Edited by DocM
  • Like 3

Per NASASpaceFlight.com, the post-Irma checkouts have been completed and Echostar 105/SES-11 is still on for October 2nd, static fire on Sept.ember 29.

 

The sets  up another 2-day double-header with the Iridium NEXT #3 launch on October 4th at Vandenberg AFB.

 

This will be the last LC-39a launch before the Falcon Heavy/Commercial Crew refit break, and also indicates that the LC-40 repairs are nearing completion.

 

Hang on to your hats, it's going to be an interesting Q4. 

Edited by DocM
  • Like 2

Part 1 of 2 stories about the new Brownsville LNG terminals, this one confirming a feed to SpaceX's facility at Boca Chica. Maybe more in part 2, and from Elon Musk next Friday in his IAC 2017 Mars/BFR update. 

 

https://riograndeguardian.com/400-million-port-of-brownsville-shipbuilding-contract-finalized/

 

MCALLEN, RGV – A $400 million contract between Honolulu-based Pasha Hawaii and Keppel AmFELS has now been finalized and as a result, two new Liquefied Natural Gas-fueled container ships will be built at the Port of Brownsville.



Eduardo A. Campirano, port director and CEO of the Port of Brownsville, announced the news at a Rio South Texas Economic Council meeting. He said 700 new jobs would be created. Campirano also gave an update about a natural gas pipeline coming into the Rio Grande Valley, liquefied natural gas terminals at the port, and SpaceX.


Eduardo A. Campirano


“I am delighted to say that the contracts were signed and contractors are on site starting the production expansion for those facilities. The Valley is going to be in the shipbuilding business in a big way,” Campirano said.
>

  • Like 1

Part 2

 

Part 2

 

http://riograndeguardian.com/campirano-elon-musk-may-have-bigger-plans-for-boca-chica/

 

Quote

 

McALLEN, RGV  Eduardo A. Campirano, port director and CEO of the Port of Brownsville, says he would not be surprised to see Elon Musk announce even bigger plans for SpaceXs rocket-launching site at Boca Chica.

>

"I know Elon Musk is expected to speak on the 29th and everyone holds their breath to see what" he says. "I think he has made some indications that there may be some bigger plans for Boca Chica than initially anticipated,"0 Campirano said, in response to a question from Mike Willis on the South Texas Manufacturers Association.

 

"If you recall, at one of them, everyone kind of said he was crazy when he talked about launching rockets to Mars and he will be sending people. I would not be surprised to hear at one of his upcoming forums where he will just say when it is going to occur."

>

"They are moving forward with plans for Boca Chica. They have been working on their launch pad, that is going to happen. We have been told they have pushed the rocket launches back a year. So, instead of 2017 it is 2018. It seems to be on schedule. If there are any changes to that it will be potentially be because something else is going on. We are excited to see that (the International Astronautical Congress) going on. And then, of course, the university (UTRGV) is starting to do some of the preliminary work on Stargate (at Boca Chica). All that stuff goes hand in hand."
>


 

 

And Australia is gonna be joining the active Space community very soon. As in launches and way more. (Bout time. :yes:) They've supported NASA since the beginning, and we've always had a special place in our heart for our peeps down under. ;) Sorry Brits ... the secret's out now. We've been cheating on ya with Aussies. :laugh:

 

Seriously though, this is fantastic news. And if Elon is down there already, there's deals being made for SpaceX assistance. Bet on it. As much as SpaceX is allowed to help. :yes: 

 

Instagram full text,


"elonmusk Simulation of how the SpaceX Interplanetary Spaceship and Rocket design would work. Will be unveiling the new version on Friday afternoon at IAC Adelaide. Certain aspects of the new design and its applications will be unexpected."

 

Edited by DocM
  • Like 2

I'm hoping to see the footage of baby Raptor operating at Merlin-D (Block-5) plus power levels. We all remember the "aftermath shot" of the scorched earth it left behind ... I wanna see that test. :yes: 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!