Recommended Posts

6 minutes ago, PaulRocket said:

Apparently Falcon 9 Block 5 will feature an inconel heat shield:

https://forum.nasaspaceflight.com/index.php?topic=39167.msg1719169#msg1719169

 

Has this ever been done before? What are the implications?

The X-15 skin was Inconel X ... I believe the shuttle used Inconel studs on the SRBs (not sure about the studs between the shuttle and ET), the Saturn's first stage engine thrust chambers were Inconel as are the Merlin's manifolds.  

 

Anyway ... I would suspect that this may allow the first stage to come in a lot hotter and/or allow for faster turnaround times?  (Purely speculation).

Interesting material ... lots of high-temp uses, and it's better all-around than Titanium when heated. It's great stuff. There are other uses for it too -- many of the newer uses are "embargoed", though. Many, many iterations of Iconnel going back a long time that have different properties for different applications. That's why it's an "Icon". :yes: 

The main post on the bottom of my leg  prosthesis is a:pp made of an  Inconel variant. Strong, corrosion-resistant, etc. Tesla also uses an Inconel protective shield for their car batteries. Plenty of collision resistance.

 

Metallic heat shields have been used before, X-15  being one example.  Some of them quite exotic, such as those which use thorium alloys - which has a side effect of being slightly radioactive. Others are made of metallic ceramics. These tiles are usually mounted on standoffs which hold them above from the less thermally resistant  airframe.

 

Block 5's Inconel heat shields will probably replace those ablatives made of cork and SPAM* around the Octaweb.

 

* SpaceX Proprietary Ablative Material, which is used as the outer shell of Dragon, Dragon 2 and elsewhere.

Edited by DocM
  • Like 1

Yep, I agree. Replacing the "consumables" with resistant materials at this point will do wonders for reuse and turnaround times. :yes: It'll go from 1~3 months to a little under two weeks or less. Probably less. 

Falcon 9 failed landing demo reel. Note the F9R Dev-1 in-flight abort is in there under failed engine sensor.

 

 "Failure is an option here. If things are not failing, you are not innovating enough."

~~Elon Musk (recently paraphrased by a USAF General before Congress)

 

 

  • Like 2
EDIT: Whoops forgot to refresh before posting! Sorry @DocM
 
It's really good to see they can post things like this without people losing faith as it's been proven time after time that each of these was a lesson.

 

24 minutes ago, DocM said:

Falcon 9 failed landing demo reel. Note the F9R Dev-1 in-flight abort is in there under failed engine sensor.

 

 "Failure is an option here. If things are not failing, you are not innovating enough."

~~Elon Musk (recently paraphrased by a USAF General before Congress)

<snipped>

Ah, the CRS-6 landing! With the little thruster that could. Bless it, it tried so hard!

14 minutes ago, John. said:

Sorry for wall of posts, full version of "How NOT to land an orbital rocket booster" is available here: 

 

I love the music and commentary - "It's not an explosion, it's just a rapid unscheduled disassembly"

 

The stuff these guys are doing is simply phenomenal 

  • Like 3

A government launch right out of the gate. This would put it in the April to June window.

 

COSMIC = Constellation Observing System for Meteorology, Ionosphere and Climate, a joint venture between Taiwan and the US via NASA (JPL) and NOAA

 

 

Edited by DocM
  • Like 3

Per NASASpaceFlight.com, the post-Irma checkouts have been completed and Echostar 105/SES-11 is still on for October 2nd, static fire on Sept.ember 29.

 

The sets  up another 2-day double-header with the Iridium NEXT #3 launch on October 4th at Vandenberg AFB.

 

This will be the last LC-39a launch before the Falcon Heavy/Commercial Crew refit break, and also indicates that the LC-40 repairs are nearing completion.

 

Hang on to your hats, it's going to be an interesting Q4. 

Edited by DocM
  • Like 2

Part 1 of 2 stories about the new Brownsville LNG terminals, this one confirming a feed to SpaceX's facility at Boca Chica. Maybe more in part 2, and from Elon Musk next Friday in his IAC 2017 Mars/BFR update. 

 

https://riograndeguardian.com/400-million-port-of-brownsville-shipbuilding-contract-finalized/

 

MCALLEN, RGV – A $400 million contract between Honolulu-based Pasha Hawaii and Keppel AmFELS has now been finalized and as a result, two new Liquefied Natural Gas-fueled container ships will be built at the Port of Brownsville.



Eduardo A. Campirano, port director and CEO of the Port of Brownsville, announced the news at a Rio South Texas Economic Council meeting. He said 700 new jobs would be created. Campirano also gave an update about a natural gas pipeline coming into the Rio Grande Valley, liquefied natural gas terminals at the port, and SpaceX.


Eduardo A. Campirano


“I am delighted to say that the contracts were signed and contractors are on site starting the production expansion for those facilities. The Valley is going to be in the shipbuilding business in a big way,” Campirano said.
>

  • Like 1

Part 2

 

Part 2

 

http://riograndeguardian.com/campirano-elon-musk-may-have-bigger-plans-for-boca-chica/

 

Quote

 

McALLEN, RGV  Eduardo A. Campirano, port director and CEO of the Port of Brownsville, says he would not be surprised to see Elon Musk announce even bigger plans for SpaceXs rocket-launching site at Boca Chica.

>

"I know Elon Musk is expected to speak on the 29th and everyone holds their breath to see what" he says. "I think he has made some indications that there may be some bigger plans for Boca Chica than initially anticipated,"0 Campirano said, in response to a question from Mike Willis on the South Texas Manufacturers Association.

 

"If you recall, at one of them, everyone kind of said he was crazy when he talked about launching rockets to Mars and he will be sending people. I would not be surprised to hear at one of his upcoming forums where he will just say when it is going to occur."

>

"They are moving forward with plans for Boca Chica. They have been working on their launch pad, that is going to happen. We have been told they have pushed the rocket launches back a year. So, instead of 2017 it is 2018. It seems to be on schedule. If there are any changes to that it will be potentially be because something else is going on. We are excited to see that (the International Astronautical Congress) going on. And then, of course, the university (UTRGV) is starting to do some of the preliminary work on Stargate (at Boca Chica). All that stuff goes hand in hand."
>


 

 

And Australia is gonna be joining the active Space community very soon. As in launches and way more. (Bout time. :yes:) They've supported NASA since the beginning, and we've always had a special place in our heart for our peeps down under. ;) Sorry Brits ... the secret's out now. We've been cheating on ya with Aussies. :laugh:

 

Seriously though, this is fantastic news. And if Elon is down there already, there's deals being made for SpaceX assistance. Bet on it. As much as SpaceX is allowed to help. :yes: 

 

Instagram full text,


"elonmusk Simulation of how the SpaceX Interplanetary Spaceship and Rocket design would work. Will be unveiling the new version on Friday afternoon at IAC Adelaide. Certain aspects of the new design and its applications will be unexpected."

 

Edited by DocM
  • Like 2

I'm hoping to see the footage of baby Raptor operating at Merlin-D (Block-5) plus power levels. We all remember the "aftermath shot" of the scorched earth it left behind ... I wanna see that test. :yes: 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • AnyDesk 9.7.7 by Razvan Serea AnyDesk is a fast remote desktop system and enables users to access their data, images, videos and applications from anywhere and at any time, and also to share it with others. AnyDesk is the first remote desktop software that doesn't require you to think about what you can do. CAD, video editing or simply working comfortably with an office suite for hours are just a few examples. AnyDesk is designed for modern multi-core CPUs. Most of AnyDesk's image processing is done con­currently. This way, AnyDesk can utilize up to 90% of modern CPUs. AnyDesk works across multiple platforms and operating systems: Windows, Linux, Free BSD, Mac OS, iOS and Android. Just 7 megabytes - downloaded in a glimpse, sent via email, or fired up from your USB drive, AnyDesk will turn any desktop into your desktop in se­conds. No administrative privileges or installation needed. AnyDesk 9.7.7 fixes: Fixed an issue that prevented users from creating meetings without an active license Download: AnyDesk 9.7.7 | 8.0 MB (Free for private use, paid upgrade available) Links: AnyDesk Home Page | Other platforms | Release History | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!