Recommended Posts

6 minutes ago, PaulRocket said:

Apparently Falcon 9 Block 5 will feature an inconel heat shield:

https://forum.nasaspaceflight.com/index.php?topic=39167.msg1719169#msg1719169

 

Has this ever been done before? What are the implications?

The X-15 skin was Inconel X ... I believe the shuttle used Inconel studs on the SRBs (not sure about the studs between the shuttle and ET), the Saturn's first stage engine thrust chambers were Inconel as are the Merlin's manifolds.  

 

Anyway ... I would suspect that this may allow the first stage to come in a lot hotter and/or allow for faster turnaround times?  (Purely speculation).

Interesting material ... lots of high-temp uses, and it's better all-around than Titanium when heated. It's great stuff. There are other uses for it too -- many of the newer uses are "embargoed", though. Many, many iterations of Iconnel going back a long time that have different properties for different applications. That's why it's an "Icon". :yes: 

The main post on the bottom of my leg  prosthesis is a:pp made of an  Inconel variant. Strong, corrosion-resistant, etc. Tesla also uses an Inconel protective shield for their car batteries. Plenty of collision resistance.

 

Metallic heat shields have been used before, X-15  being one example.  Some of them quite exotic, such as those which use thorium alloys - which has a side effect of being slightly radioactive. Others are made of metallic ceramics. These tiles are usually mounted on standoffs which hold them above from the less thermally resistant  airframe.

 

Block 5's Inconel heat shields will probably replace those ablatives made of cork and SPAM* around the Octaweb.

 

* SpaceX Proprietary Ablative Material, which is used as the outer shell of Dragon, Dragon 2 and elsewhere.

Edited by DocM
  • Like 1

Yep, I agree. Replacing the "consumables" with resistant materials at this point will do wonders for reuse and turnaround times. :yes: It'll go from 1~3 months to a little under two weeks or less. Probably less. 

Falcon 9 failed landing demo reel. Note the F9R Dev-1 in-flight abort is in there under failed engine sensor.

 

 "Failure is an option here. If things are not failing, you are not innovating enough."

~~Elon Musk (recently paraphrased by a USAF General before Congress)

 

 

  • Like 2
EDIT: Whoops forgot to refresh before posting! Sorry @DocM
 
It's really good to see they can post things like this without people losing faith as it's been proven time after time that each of these was a lesson.

 

24 minutes ago, DocM said:

Falcon 9 failed landing demo reel. Note the F9R Dev-1 in-flight abort is in there under failed engine sensor.

 

 "Failure is an option here. If things are not failing, you are not innovating enough."

~~Elon Musk (recently paraphrased by a USAF General before Congress)

<snipped>

Ah, the CRS-6 landing! With the little thruster that could. Bless it, it tried so hard!

14 minutes ago, John. said:

Sorry for wall of posts, full version of "How NOT to land an orbital rocket booster" is available here: 

 

I love the music and commentary - "It's not an explosion, it's just a rapid unscheduled disassembly"

 

The stuff these guys are doing is simply phenomenal 

  • Like 3

A government launch right out of the gate. This would put it in the April to June window.

 

COSMIC = Constellation Observing System for Meteorology, Ionosphere and Climate, a joint venture between Taiwan and the US via NASA (JPL) and NOAA

 

 

Edited by DocM
  • Like 3

Per NASASpaceFlight.com, the post-Irma checkouts have been completed and Echostar 105/SES-11 is still on for October 2nd, static fire on Sept.ember 29.

 

The sets  up another 2-day double-header with the Iridium NEXT #3 launch on October 4th at Vandenberg AFB.

 

This will be the last LC-39a launch before the Falcon Heavy/Commercial Crew refit break, and also indicates that the LC-40 repairs are nearing completion.

 

Hang on to your hats, it's going to be an interesting Q4. 

Edited by DocM
  • Like 2

Part 1 of 2 stories about the new Brownsville LNG terminals, this one confirming a feed to SpaceX's facility at Boca Chica. Maybe more in part 2, and from Elon Musk next Friday in his IAC 2017 Mars/BFR update. 

 

https://riograndeguardian.com/400-million-port-of-brownsville-shipbuilding-contract-finalized/

 

MCALLEN, RGV – A $400 million contract between Honolulu-based Pasha Hawaii and Keppel AmFELS has now been finalized and as a result, two new Liquefied Natural Gas-fueled container ships will be built at the Port of Brownsville.



Eduardo A. Campirano, port director and CEO of the Port of Brownsville, announced the news at a Rio South Texas Economic Council meeting. He said 700 new jobs would be created. Campirano also gave an update about a natural gas pipeline coming into the Rio Grande Valley, liquefied natural gas terminals at the port, and SpaceX.


Eduardo A. Campirano


“I am delighted to say that the contracts were signed and contractors are on site starting the production expansion for those facilities. The Valley is going to be in the shipbuilding business in a big way,” Campirano said.
>

  • Like 1

Part 2

 

Part 2

 

http://riograndeguardian.com/campirano-elon-musk-may-have-bigger-plans-for-boca-chica/

 

Quote

 

McALLEN, RGV  Eduardo A. Campirano, port director and CEO of the Port of Brownsville, says he would not be surprised to see Elon Musk announce even bigger plans for SpaceXs rocket-launching site at Boca Chica.

>

"I know Elon Musk is expected to speak on the 29th and everyone holds their breath to see what" he says. "I think he has made some indications that there may be some bigger plans for Boca Chica than initially anticipated,"0 Campirano said, in response to a question from Mike Willis on the South Texas Manufacturers Association.

 

"If you recall, at one of them, everyone kind of said he was crazy when he talked about launching rockets to Mars and he will be sending people. I would not be surprised to hear at one of his upcoming forums where he will just say when it is going to occur."

>

"They are moving forward with plans for Boca Chica. They have been working on their launch pad, that is going to happen. We have been told they have pushed the rocket launches back a year. So, instead of 2017 it is 2018. It seems to be on schedule. If there are any changes to that it will be potentially be because something else is going on. We are excited to see that (the International Astronautical Congress) going on. And then, of course, the university (UTRGV) is starting to do some of the preliminary work on Stargate (at Boca Chica). All that stuff goes hand in hand."
>


 

 

And Australia is gonna be joining the active Space community very soon. As in launches and way more. (Bout time. :yes:) They've supported NASA since the beginning, and we've always had a special place in our heart for our peeps down under. ;) Sorry Brits ... the secret's out now. We've been cheating on ya with Aussies. :laugh:

 

Seriously though, this is fantastic news. And if Elon is down there already, there's deals being made for SpaceX assistance. Bet on it. As much as SpaceX is allowed to help. :yes: 

 

Instagram full text,


"elonmusk Simulation of how the SpaceX Interplanetary Spaceship and Rocket design would work. Will be unveiling the new version on Friday afternoon at IAC Adelaide. Certain aspects of the new design and its applications will be unexpected."

 

Edited by DocM
  • Like 2

I'm hoping to see the footage of baby Raptor operating at Merlin-D (Block-5) plus power levels. We all remember the "aftermath shot" of the scorched earth it left behind ... I wanna see that test. :yes: 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Fresh CachyOS install with Niri - I guess it's a little orange, but I'm working on it
    • FastStone Image Viewer 8.5 by Razvan Serea FastStone Image Viewer is a fast, stable, user-friendly image browser, converter and editor. It has a nice array of features that include image viewing, management, comparison, red-eye removal, emailing, resizing, cropping, retouching and color adjustments. Its innovative but intuitive full-screen mode provides quick access to EXIF information, thumbnail browser and major functionalities via hidden toolbars that pop up when your mouse touches the four edges of the screen. Other features include a high quality magnifier and a musical slideshow with 150+ transitional effects, as well as lossless JPEG transitions, drop shadow effects, image annotation, scanner support, histogram and much more. It supports all major graphic formats (BMP, JPEG, JPEG 2000, animated GIF, PNG, PCX, PSD, EPS, TIFF, WMF, ICO and TGA) and popular digital camera RAW formats (CRW, CR2, NEF, PEF, RAF, MRW, ORF, SRF, ARW, SR2, RW2 and DNG). FastStone Image Viewer features: Image browser and viewer with a familiar Windows Explorer-like user interface Support for many popular image formats and PDF viewing True Full Screen viewer with convenient image zoom support and unique fly-out menu panels Crystal-clear and customizable one-click image magnifier Powerful image editing tools: Resize/resample, rotate/flip, crop, sharpen/blur, adjust lighting/colors/curves/levels etc. Eleven re-sampling algorithms to choose from when resizing images Image color effects: gray scale, sepia, negative, Red/Green/Blue adjustment Image special effects: drop shadow, framing, bump map, sketch, oil painting, lens Draw texts, lines, highlights, rectangles, ovals and callout objects on images Clone Stamp and Healing Brush Superior red-eye effect removal/reduction with completely natural looking end result Multi-level Undo/Redo capability Single click to switch between best fit and actual size mode Image management, including file tagging, rating and drag-and-drop to copy/move/re-arrange files Histogram display with color counter feature Compare images side-by-side (up to 4 at a time) to easily cull those forgettable shots Image EXIF metadata support (plus comment editing for JPEGs) Configurable batch processing to convert/rename large or small collections of images Slideshow with 150+ transition effects and music support (MP3, WMA, WAV...) Create efficient image attachments for emailing to family and friends Print images with full page-layout control Create fully configurable contact sheets Create memorable artistic image montages from your family photos for personalized desktop wallpapers (Wallpaper Anywhere) Acquire images from scanners. Support batch scanning to PDF, TIFF, JPEG and PNG Versatile screen capture capability Powerful Save As interface to compare image quality and control generated file size Run favorite external editors with one keystroke from within Image Viewer Offer portable version of the program which can be run from a removable storage device Configurable mouse wheel support Support themes (bright, gray and dark) Support dual-monitor configurations Support touch interface (tap, swipe, pinch) Support dual instances Play video and audio files (Third party codecs may be required for old versions of Windows) And much more... FastStone Image Viewer 8.5 changelog: Added support for SVG format Added Start importing automatically and Handle duplicate file names automatically options to the Import Photos and Videos tool WebP files can now be rotated and saved with a single click Enhanced dark theme support in the PDF viewer Fixed a bug where some links in PDF files were not clickable Other improvements and bug fixes Download: FastStone Image Viewer 8.5 | Portable | ~15.0 MB (Freeware) View: FastStone Image Viewer Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yup, broke my comp… again. its times like this when I regret AMD. This just never happens on NV.
    • Huh? You're delusional calling the Steam Deck dead. It is so successful that it has sold out multiple times. Even after the price hike this year it sold out again with 24 hours of being back in stock. The demand is real and has not died down even after four years.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      160
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      85
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!