Recommended Posts

59 minutes ago, DocM said:

The current schedule is for Crew Dragon uncrewed to ISS in early Q1 2017, a crewed flight to ISS in late Q2 2017,  and the in-flight abort test in he middle - reusng  the uncrewed test flights vehicle.

Dates typo: Q2 &  Q3 2018

  • Like 1
  • 2 weeks later...

I hope they dont go public, it is what Musk has always been against, if they go public the he and the company are beholden to the shareholders. It reduces the risk that he can take and increases the regulation that the business needs to abide by. They do need extra money but I hope they can find a way around this.

  • Like 1

If it were up to me I'd say keep the company private aside from Investors like they've been doing. No reason to mess up a good thing, and it eliminates the chances of a hostile takeover from OldSpace companies who would do it if given the opportunity.

Q: Why was Raptor thrust reduced from ~300 tons-force to ~170 tons-force?

 

A: The engine thrust dropped roughly in proportion to the vehicle mass reduction from the first IAC talk. In order to be able to land the BF Ship with an engine failure at the worst possible moment, you have to have multiple engines. The difficulty of deep throttling an engine increases in a non-linear way, so 2:1 is fairly easy, but a deep 5:1 is very hard. Granularity is also a big factor. If you just have two engines that do everything, the engine complexity is much higher and, if one fails, you've lost half your power. Btw, we modified the BFS design since IAC to add a third medium area ratio Raptor engine partly for that reason (lose only 1/3 thrust in engine out) and allow landings with higher payload mass for the Earth to Earth transport function.

 

Q: Will the BFS landing propellants have to be actively cooled on the long trip to Mars?

 

A: The main tanks will be vented to vacuum, the outside of the ship is well insulated (primarily for reentry heating) and the nose of the ship will be pointed mostly towards the sun, so very little heat is expected to reach the header tanks. That said, the propellant can be cooled either with a small amount of evaporation. Down the road, we might add a cryocooler.

 

Q: (BFS testing)

 

A: Will be starting with a full-scale Ship doing short hops of a few hundred kilometers altitude and lateral distance. Those are fairly easy on the vehicle, as no heat shield is needed, we can have a large amount of reserve propellant and don't need the high area ratio, deep space Raptor engines.

 

Next step will be doing orbital velocity Ship flights, which will need all of the above. Worth noting that BFS is capable of reaching orbit by itself with low payload, but having the BF Booster increases payload by more than an order of magnitude. Earth is the wrong planet for single stage to orbit. No problemo on Mars.

 

Q: (heat shield)

A: The heat shield plates will be mounted directly to the primary tank wall. That's the most mass efficient way to go. Don't want to build a box in box.

Q: (Tanker)

A: At first, the tanker will just be a ship with no payload. Down the road, we will build a dedicated tanker that will have an extremely high full to empty mass ratio (warning: it will look kinda weird).

Q: (Raptor scaling, Point 2 Point flights)

A: Thrust scaling is the easy part. Very simple to scale the dev Raptor to 170 tons.

The flight engine design is much lighter and tighter, and is extremely focused on reliability. The objective is to meet or exceed passenger airline levels of safety. If our engine is even close to a jet engine in reliability, has a flak shield to protect against a rapid unscheduled disassembly and we have more engines than the typical two of most airliners, then exceeding airline safety should be possible.

That will be especially important for point to point journeys on Earth. The advantage of getting somewhere in 30 mins by rocket instead of 15 hours by plane will be negatively affected if "but also, you might die" is on the ticket. 

 

Edited by DocM
  • Love 1

 

Q: (BFR/BFS thrusters)

 

A: The control thrusters will be closer in design to the Raptor main chamber than SuperDraco and will be pressure-fed to enable lowest possible impulse bit (no turbopump spin delay).

 

Q: (Raptor construction)

 

A: Some parts of Raptor will be printed, but most of it will be machined forgings. We developed a new metal alloy for the oxygen pump that has both high strength at temperature and won't burn. Pretty much anything will burn in high pressure, hot, almost pure oxygen.

  • Like 1

Niiiiice ... An already-cheap lifter gets super cheap when running in SSTO mode. That'll bode extremely cost-efficient when toting crews to the ISS and other LEO Stations. Just add fuel and go. :yes: 

Bwahaha ... heheh ... nobody will be able to compete with that for at least ten years. Need another? Load it up, fuel it up and send it up. Week turnaround time, max. (The way NASA does things it'd take two, but w/e)

 

No wonder Orbital sold out. They knew they had no way to win against SpaceX.

Q: Who will design and build the ISRU system for the propellant depot, and how far along is it?

 

[ISRU: liqiid methane & liquid oxygen production on Mars, rocket propellants]

A: SpaceX. Design is pretty far along. It's a key part of the whole system.

Q: Why was the location and shape of the BFS header/landing tanks changed?

A: The aspiration by the change was to avoid/minimize plumbing hell, but we don't super love the current header tank/plumbing design. Further refinement is likely.

Q: Second, Elon we need 4K rocket porn

A: Ask and you shall receive

  • Love 1

Iridium NEXT #'s 4 and 5 to use Flight Proven™ Falcon 9 launchers, with no change in launch insurance costs.

 

Quote

Iridium Announces Date for Fourth Iridium® NEXT Launch

 

Agreement Signed with SpaceX to Use Flight-Proven First Stage of Falcon 9 Rocket

MCLEAN, Va. – October 19, 2017 - Iridium Communications Inc. (NASDAQ: IRDM) announced today that the fourth Iridium NEXT launch has been targeted by SpaceX for December 22, 2017 at 5:26 p.m. PT [1:26 a.m. UTC on Dec. 23], from Vandenberg Air Force Base. This launch signifies the mid-way point of the Iridium NEXT launch program and will deliver another 10 satellites to orbit, bringing the total number deployed to 40. Targeted for just over two months after the third Iridium NEXT launch, this December date enables Iridium to maintain its planned cadence of completing all launches by mid-2018, even with SpaceX’s busy launch manifest.

To date, 30 Iridium NEXT satellites have been deployed, many of which are already providing service to customers. The new satellites are also now undergoing on-orbit testing for Iridium CertusSM, a major milestone on the path to introducing the company’s next generation broadband service.  Iridium Certus will feature small form factor, cost-effective terminals and antennas, and ultimately offer the fastest L-band broadband solution available, supported by the world's only truly global network.

In addition to the fourth launch date, Iridium also announced it has reached agreement with SpaceX to utilize flight-proven first stages for the next two Iridium launches.  Iridium conducted extensive due diligence work and is fully confident in the SpaceX booster refurbishment program.

“I believe that reusability is the future for satellite launches, and I think SpaceX has intelligently built their Falcon 9 program around this strategy,” said Iridium CEO Matt Desch. “With three successful flight-proven Falcon 9 launches already this year, we’re excited to show leadership towards the sustainable access to space, while also making sure we maintain our cadence to complete the five remaining Iridium NEXT launches by the middle of next year.”

Iridium confirmed with its insurers that there is no increase in premium for the launch program as a result of the use of flight-proven Falcon 9 rockets, further supporting Iridium’s conclusion that the risk profile is unchanged.

Iridium NEXT is the company’s $3 billion, next-generation, mobile, global satellite network scheduled for completion in 2018. Iridium NEXT will replace the company’s existing global constellation in one of the largest technology upgrades ever completed in space.  It represents the evolution of critical communications infrastructure that governments and organizations worldwide rely upon to drive business, enable connectivity, empower disaster relief efforts and more. Iridium NEXT will enable and introduce new services like the company’s next-generation communications platform, Iridium Certus, and the AireonSM space-based ADS-B aircraft surveillance and flight tracking network. 

For more information about Iridium NEXT, please visit www.IridiumNEXT.com.

>

 

  • Like 2

The SpaceX launch contract wins just keep on coming...

 

Falcon 9 gets Jason CS, aka Sentiel-6A, for NASA, NOAA, ESA and EUMETSAT. $97m.

 

Quote

NASA has selected Space Exploration Technologies (SpaceX) of Hawthorne, California, to provide launch services for the Sentinel-6A mission. Launch is currently targeted for November 2020, on a SpaceX Falcon 9 Full Thrust rocket from Space Launch Complex 4E at Vandenberg Air Force Base in California.

 

The total cost for ASA to launch Sentinel-6A is approximately $97 million, which includes the launch service and other mission related costs.

The Sentinel-6A mission, also known as Jason Continuity of Service (Jason-CS), is a partnership between NASA, the National Oceanic and Atmospheric Administration (NOAA), the European Space Agency, and the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT). This mission provides operational ocean altimetry to provide continuity of ocean topography measurements and continues the long-term global sea surface height data record begun in 1992 by the Topography Experiment (TOPEX)/Poseidon and Jason 1, the Ocean Surface Topography Mission (OSTM)/Jason-2 and Jason-3 missions. A secondary objective of the mission is to collect high-resolution vertical profiles of temperature, using the Global Navigation Satellite System (GNSS) Radio-Occultation sounding technique, to assess temperature changes in the troposphere and stratosphere and to support numerical weather prediction.

NASA’s Launch Services Program at Kennedy Space Center in Florida will manage the SpaceX launch service. The Sentinel-6 Project office is located at NASA’s Jet Propulsion Laboratory in Pasadena, California.

For more information about NASA programs and missions, visit:

http://www.nasa.gov

-end-

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Pretty nice tool, thanks
    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
    • One of the strangest galaxies in our Universe could help answer some long overdue questions by Sayan Sen Image by Pixabay via Pexels | Not representative An international team of astronomers led by the Department of Astronomy at Tsinghua University has discovered an unusually metal-poor galaxy that may contain signs of first-generation star formation. The galaxy, named Metal-Pristine Galaxy COSMOS Redshift 3 (MPG-CR3), or CR3, was identified using observations from the James Webb Space Telescope (JWST), the Very Large Telescope (VLT), and the Subaru Telescope. The findings, published in The Astrophysical Journal Letters, describe CR3 as the most metal-poor galaxy known from the period known as "cosmic noon," around 11.5 billion years ago. Cosmic noon refers to a period when the universe was producing stars at its highest rate and galaxies were growing rapidly. In astronomy, "metals" refers to all elements heavier than helium, including oxygen, carbon, and iron. Because CR3 contains so few of these heavier elements, researchers say it closely resembles what scientists expect the earliest galaxies in the universe may have looked like. The discovery is significant because it could offer clues about Population III (Pop III) stars, the first generation of stars thought to have formed after the Big Bang. These stars are believed to have formed from gas made almost entirely of hydrogen and helium, before heavier elements were created inside stars and spread across the universe through supernova explosions. Hence this is why CR3 has been referred to as a "living fossil." Scientists have long believed that Population III stars existed only in the very early universe. As more generations of stars formed and died, they enriched surrounding gas with heavier elements, making the conditions needed for metal-free star formation increasingly rare. Because of this, researchers expected the formation of such stars to have largely ended after the epoch of reionization, a period when radiation from the first stars and galaxies transformed the neutral hydrogen filling the universe and made it largely transparent to ultraviolet light. CR3 appears to challenge that idea. The galaxy was observed at a redshift of z = 3.193 ± 0.016. Redshift measures how much light from a distant object has been stretched as the universe expands and helps astronomers determine how far back in time they are looking. In this case, the redshift corresponds to roughly 11.5 billion years ago during cosmic noon. Although the universe was already several billion years old by that point, CR3 shows characteristics more commonly associated with much earlier galaxies. Observations revealed exceptionally strong emissions from hydrogen and helium, including Lyα, Hα, and He I λ10830. Lyα, or Lyman-alpha emission, is a specific wavelength of light produced by hydrogen and is widely used to study distant galaxies. Hα emission is another hydrogen signature commonly used to trace active star formation, while He I λ10830 is produced by helium and can indicate the presence of very hot, young stars. The measured equivalent widths of EW₀(Lyα) = 822 ± 101 Å and EW₀(Hα) = 2814 ± 327 Å are among the highest ever observed in star-forming galaxies. Equivalent width is a measure of the strength of an emission line relative to the surrounding light, and such large values are typically associated with intense and very recent star formation. At the same time, researchers found no statistically significant detections of metal emission lines, including [O III] λλ4959, 5007 and C IV λλ1548, 1550. Emission lines act as chemical fingerprints that reveal which elements are present in a galaxy. Oxygen and carbon lines are commonly seen in galaxies that have already undergone significant chemical enrichment. Their absence in CR3 suggests an unusually pristine environment. Using abundance calibration methods developed with JWST observations, the team placed a 2σ upper limit on the galaxy's gas-phase metallicity of 12+log(O/H)<6.52, corresponding to less than 0.7% of the Sun's metallicity (Z < 7 × 10⁻³ Z⊙). Gas-phase metallicity measures the abundance of heavy elements in a galaxy's gas. A 2σ upper limit indicates that the true value is very unlikely to be higher than the quoted threshold. Even when accounting for uncertainties in the calibration methods, the most conservative limit remains 12+log(O/H)<6.95, making CR3 the most metal-poor galaxy identified at cosmic noon. The galaxy also appears to contain very little dust. Researchers measured a Lyα/Hα flux ratio of 13.9 ± 2.5, a result that suggests negligible dust attenuation, meaning very little of the galaxy's light is being absorbed or scattered by cosmic dust. Because dust is usually produced by earlier generations of stars, this finding further supports the idea that CR3 has experienced very little chemical enrichment. Further analysis using spectral energy distribution modelling, a technique that compares observed light with theoretical models, suggests that CR3 contains an extremely young stellar population only around 2 million years old. The modelling, which used Population III stellar templates, also indicates the galaxy has a stellar mass of approximately 6.1 × 10⁵ M⊙. The symbol M⊙ represents one solar mass, or the mass of the Sun. One of the key questions raised by the discovery is how such a chemically primitive galaxy could exist in a universe that had already spent billions of years producing heavier elements. To investigate this, the researchers examined CR3's surroundings. Their analysis suggests the galaxy may lie in a slightly underdense environment, with a density contrast of roughly δ ≈ −0.12. An underdense region contains less matter and fewer galaxies than average. The team suggests that this relative isolation may have helped preserve pockets of pristine gas. Metal-rich material expelled from nearby galaxies may never have reached CR3, while the lower rate of galaxy mergers and interactions could have slowed the mixing of enriched gas into the system. If future observations confirm these findings, CR3 could provide some of the strongest evidence yet that first-generation star formation continued well after the epoch of reionization. Such a result would challenge the conventional view that pristine star formation ended by z ≳ 6 and suggest that small pockets of metal-free gas survived much longer than previously thought. Researchers stress that more observations will be needed to determine the galaxy's true nature. Future spectroscopic studies with higher resolution and better signal quality could help confirm whether CR3 is genuinely hosting Population III star formation. The discovery is also expected to encourage searches for other similar galaxies, which could help astronomers better understand how the first stars formed and how galaxies evolved in the early universe. Source: Tsinghua University, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • "I think in the immediate absence of a partner to apply relief" In the words of Sterling Archer... "Phrasing!"
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      454
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!