Recommended Posts

It's only because they have to. Otherwise ULA will be squawking about "monopolies" and being "locked out" (get it?) and such ... the same crap they themselves did for years and years. LockMart and Boeing used to take each other to court so often in the old days before the joint venture ULA that it was almost comical.

 

55 minutes ago, Unobscured Vision said:

It's only because they have to. Otherwise ULA will be squawking about "monopolies" and being "locked out" (get it?) and such ... the same crap they themselves did for years and years. LockMart and Boeing used to take each other to court so often in the old days before the joint venture ULA that it was almost comical.

That's what I figured it was. Thanks! 

  • Like 1

This favoring of Atlas V only lasts until the launchers bought on the bulk buy are expended and Vulcan takes over from it. 

 

Atlas V and Delta IV are going away. That's a is lock. Delta IV's last launch is 2018, and as soon as an alternative can be fielded which does not use Russian engines Atlas V will be relegated to non-government launches where it cannot easily compete.

 

Then the situation favors the Falcons because Vulcan will need 3-7 successful launches of various types to qualify for all classes of NASA or USAF payloads. Ditto for Blue and for BFR. Example, you wouldn't launch an RTG or nuclear reactor on a vehicle with only 3 or 4 launches. 

 

Near term the launch bid to watch for is the test flight of NASA's Kilopower space nuclear reactor, and its full size ground test takes place within the next few weeks. If either Falcon 9 or Falcon Heavy gets that launch then it will be nuclear qualified, perhaps both due to their commonality, which is the last major advantage Atlas V will have.

Edited by DocM
  • Like 1

:laugh: Sticking to what they know ... it's not gonna last, either. The whole "we gotta do what we've always done because that's the way we've always done it" mentality is gonna get them retired.

 

Just take the pension, fellas. Take the pension. You've served your masters well for long enough.

One correction to my previous post is that Delta 4-Heavy will continue to fly until 2023. 

 

There is an upcoming funded procurement/competition by the US Air Force for DIV-H's  replacement, with the expected competitors to be; 

 

ULA Vulcan (Centaur & ACES upper stages)

 

Blue Origin's New Glenn 

 

OrbitalATK's Next Generation Launcher (pka Liberty) 

 

and a SpaceX entry which could be Falcon Heavy but is more likely the BFR with the  'Chomper' Spaceship/S2 (and yes, Musk called it that at IAC-2017.) 

 

Onthe other hand, SpaceX could offer both FH and BFR/Chomper with a dual bid.

This should be for Raptor 40 then. Iteration 20.0 is ready to go, as far as we can tell. Now comes the part where SpaceX gives it the "Merlin treatment", squeezing more and more performance out of the platform in incremental upgrades. :yes: 

 

By the time they're at 20.5 or so, it'll be jamming at roughly twice the power output. Time will tell .... 

Looks like a modification of the January 2016 USAF Raptor upper stage engine development contract for F9/FH. 

 

That contract cut a USAF check for $33.6m and the proportial contribution was 2:1, meaning  a new $40.8m USAF check results in a SpaceX expenditure of $81.6m.

 

They've also moved up the completion date from December 31, 2018 to April 30, 2018.

 

In light of recent IAC announcements, the F9/FH phase out and BFR/BFS acceleration,  ISTM this could now be applylied to the BFS "Chomper" satellite delivery vehicle/BFR "upper stage."

 

https://www.defense.gov/News/Contracts/Contract-View/Article/1348379/

 

Quote


Space Exploration Technologies Corp., Hawthorne, California, has been awarded a $40,766,512 modification (P00007) for the development of the Raptor rocket propulsion system prototype for the Evolved Expendable Launch Vehicle program.  Work will be performed at NASA Stennis Space Center, Mississippi; Hawthorne, California; McGregor, Texas; and Los Angeles Air Force Base, California; and is expected to be complete by April 30, 2018.  Fiscal 2017 research, development, test and evaluation funds in the amount of $40,766,512 are being obligated at the time of award.  The Launch Systems Enterprise Directorate, Space and Missile Systems Center, Los Angeles AFB, California, is the contracting activity (FA8811-16-9-0001).

We won't have to wait long to find out then. Most of the Raptor-40 work has likely been finished already. Same design, just beef/scale some components up, retool the powerhead for the increased pressure it has to deal with, etc.

 

Likely Raptor-40 will be the 650k lbf model, and then SpaceX will start aiming for the 1,000k lbf one after that for BFR 2.0.

17 hours ago, DocM said:

Time to start taking bets as to if the power to weight ratio will  be over 300. Merlin at 200 is crazy enough, what with most engines not cracking 80-ish.

Even if they get 275 it'll be a hell of an achievement. Merlin at 200 is already a milestone for RP-1's efficiency rating. Best RP-1 engine ever made. :yes: AR-1 is gonna be great, sure -- if it gets off the test bench (and likely will) -- but Merlin is my favorite.

And all those Flight Proven™ cores in the barns are going to make it much easier to fly 40 missions next year.

 

That French space agency dude must really regret creating the SpaceX Steamroller saying

 

59f7c15140fd6_spacexsteamroller.thumb.jpg.c1fb0e67d69360c95cd4a80ba31cba7b.jpg

 

 

  • Haha 1

Yep, and all the while SpaceX will be busy:

- rolling Block-4 and Block-5 Falcon-9's out of the factory

- finalizing tooling and production methods for BFR/BFS 1.0

- getting Brownsville and Boca Chica facilities to Stage 3 milestones of completion

- getting new Vandenberg & Cape facilities up and running (for BFR/BFS assembly)

planning the Brownsville and Boca Chica BFS/BFR facilities if they haven't already been factored in

- moving/hiring personnel, equipment and logistics for the above

 

Gonna be a busy year. :yes: 

  • 2 weeks later...
Quote

SpaceX suffers Merlin engine test mishap

 

WASHINGTON — SpaceX said Nov. 8 that it suffered a failure of a Merlin engine during a recent test at its Texas facility, but that the incident would not delay any upcoming launches.

 

The incident, which took place Nov. 4 and was first reported by the Washington Post, may have involved a new version of the Merlin engine being developed by SpaceX for the next upgrade of the company’s Falcon 9 launch vehicle.

 

“SpaceX experienced an anomaly during a Qualification test set up of a Merlin engine at our rocket development facility in McGregor, Texas,” the company said in a statement to SpaceNews. No one was injured in the test, the company said, and “a thorough and fully transparent investigation” is underway, in coordination with various government agencies.

 

SpaceX has yet to disclose specific details about the incident, which a company source said took place on a Merlin test stand that has two bays. One bay reportedly suffered damage that will take two to four weeks to repair, while the neighboring bay received only minor damage that can be repaired in days.

 

The incident, according to the source, took place not during an actual engine firing but during a troubleshooting activity called a “LOX drop” where liquid oxygen is flowed through the engine to look for leaks. It wasn’t clear how this test led to the anomaly that damaged the engine and its test bay.

/snip

More at SpaceNews

 

Better on the test stand than on the launch pad or going down range.  Odd that it blew up during the LOX drop.  Will be interesting to read SpaceX's investigation into the cause.

  • Like 2

This was not during an engine run, it was during a LOX dump - a flow and leak test. It may not have even been in the engine but in the ground support equipment on the test stand. We'll get that info later.

 

Such incidents can occur when cleaning procedures were not sufficient to get all combustibles out of the engine before the next test. For example, RP-1 or some other hydrocarbon could have been missed during a cleanup and ignited when the LOX hit it.

 

Since this was a developmental Block 5 engine test, not a Block f4 which is the operational engine, the flight schedule will not be impacted.

 

Give them 2 to 4 weeks to clean up the mess and get the stand ready and it's back to testing Block 5.

 

If you aren't breaking things you aren't learning anything.

  • Like 1

Yeah, I thought the purge system was supposed to clear all of that out between tests -- just for this reason?

 

Something went screwy. They'll figure it out, identify a new and better way to handle purges, make it (and their procedures) better & more robust than ever, and it'll never happen again.

WAPO were the first ones to run this story and that is kind of messed up. Is BO going to use WAPO to spread negative info on its competitors? I don't even think they covered BO's power head failure.  Also, how did WAPO get this information? 

Scuttlebutt is a disgruntled employee at McGregor, or contractor.

 

That Bezos has been using WapPo as a political and business PR attack dog is old news. He's been doing it ever since he bought the paper a few years ago.

 

WaPo also gives Bezos and in with the spook agencies. Philip and Katherine Graham, its long-time publishers from the World War 2 days forward, were involved and there's no sign that the paper has broken that connection. Today, Amazon Web Services provides cloud services for the spooks. If you have the time look up Operation Mockingbird.

 

In other news,

 

 

Edited by DocM

Back to the "engine explosion" 

 

This was  a failure of ground support equipment (GSE) in the test stand. NASASpaceFlight.com has a story with SpaceX & NASA sourced information, photos taken by a user flying over the test center, etc. 

 

The test stand should be repaired and back in operation within a couple of weeks, and the adjoining test stand should be ready in a few days. There will be no impact on the flight manifest.

 

The test stand info starts about halfway down the page,

 

https://www.nasaspaceflight.com/2017/11/spacex-static-fire-zuma-falcon-9-engine-no-issue-manifest/

 

As SpaceX gets closer to launching astronauts using Block 5 Falcon 9's and Crew Dragon capsules in mid-2018 there will be more FUD (fear, uncertainty & doubt) and concern troll  stories, mostly sourcing from those who see this is a threat. The Usual Suspects in the industry, and their shills in Congress and the media. 

 

Expect even more as their BFR super-heavy Booster and BFS  Spaceship progress through their test programs. A BFS will be up to bat first, with the first test vehicle's keel being laid  around Q2 of 2018. The factory is being prepared, and the tooling on order.

  • Like 1
1 hour ago, DocM said:

Expect even more as their BFR super-heavy Booster and BFS  Spaceship progress through their test programs. A BFS will be up to bat first, with the first test vehicle's keel being laid  around Q2 of 2018. The factory is being prepared, and the tooling on order.

Yeah, you want to be standing WELL back when they test that bugger...

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Google Pixel 11 series: Here's what to expect by Hamid Ganji Google Pixel 10 series In recent years, Google has successfully turned its Pixel devices into worthy contenders in the smartphone market. The search giant is now preparing to launch the Pixel 11 series in just a few months, and many Pixel fans are likely wondering what Google has in store for them this year. The next lineup of Google smartphones includes four devices: the Pixel 11, Pixel 11 Pro, Pixel 11 Pro XL, and Pixel 11 Pro Fold. This year, we don’t expect Google to bring revolutionary upgrades to its handsets, and the Pixel 11 series is likely to receive modest hardware improvements alongside a slew of AI-powered features. Here are the rumored specifications of the Google Pixel 11 series ahead of its official debut: When will the new Pixel phones be unveiled? The last two generations of Google Pixel phones (Pixel 9 series and Pixel 10 series) were launched in August, unlike the previous three generations that debuted in October. With that in mind, we expect Google to unveil the Pixel 11 series sometime in August 2026. The exact launch date has yet to be confirmed. Google Pixel 11 CAD renders - Image via AndroidHeadlines How much will the Pixel 11 series cost? Predicting the final price of upcoming smartphones has become increasingly difficult. As you may know, RAM and memory prices are rising sharply, leading to significant increases in the cost of consumer electronics. Recently, Apple CEO Tim Cook said that price increases for some future Apple products are unavoidable, suggesting that the iPhone 18 series could become more expensive. Google has remained tight-lipped about any potential price increases for the Pixel 11 series. If the company manages to maintain last year’s pricing structure, here’s what the lineup could cost: Pixel 11: $799 Pixel 11 Pro: $999 Pixel 11 Pro XL: $1,199 Pixel 11 Pro Fold: $1,799 Given current market conditions, it may be difficult for Google to avoid raising prices unless it adopts cost-saving measures, such as equipping the base model with 8GB of RAM. Google Pixel 11 series anticipated specs: We expect the Google Pixel 11 series to debut with a new Tensor G6 processor as well as an upgraded camera system. The overall design, however, is expected to remain largely unchanged across the lineup. Specifications Pixel 11 Pixel 11 Pro Pixel 11 Pro XL Pixel 11 Pro Fold Display 6.3-inch LTPO AMOLED / 120Hz refresh rate / up to 3100 nits of brightness 6.3-inch Super Actua LTPO OLED, 120Hz refresh rate, up to 3600 nits of brightness 6.8-inch Super Actua LTPO OLED, 120Hz refresh rate, up to 3600 nits of brightness 8-inch inner screen and 6.4-inch outer display, 120Hz refresh rate, up to 3600 nits of brightness RAM & Processor Tensor G6 / 8-12GB of RAM Tensor G6 / 12-16GB of RAM Tensor G6 / 12-16GB of RAM Tensor G6 / 16GB of RAM Storage options 128GB or 256GB 256GB, 512GB, 1TB 256GB, 512GB, 1TB 256GB, 512GB, 1TB Camera 50MP main sensor, 13MP ultra-wide, 10.8MP 5x telephoto, 10.5MP front camera 50MP main camera, 48MP ultra-wide, 48MP telephoto with 5x optical zoom, 42MP selfie camera 50MP main camera, 48MP ultra-wide, 48MP telephoto with 5x optical zoom, 42MP selfie camera 50MP main camera, 10.5MP ultra-wide camera, 10.8MP telephoto camera, 10MP front camera, 10MP inner camera Battery 4,840 mAh 4,707 mAh 5,000 mAh 4,658 mAh Software Android 17 Android 17 Android 17 Android 17 The Pixel 11 series won’t be a major departure from its predecessor, with Google instead focusing on subtle improvements and AI additions such as Gemini Intelligence. However, a patent filed by Google suggests the company is working on a removable battery for its smartphones, and we could see this feature make its way to the Pixel 11 Pro Fold. Given that nearly all smartphones today lack removable batteries, such a feature would be a welcome addition to future Pixel devices. That said, it may not arrive with this year’s lineup after all, and the final decision is yet to be made by Google. The Pixel 11 series could also face an uphill battle in the market. In the Android segment, Samsung is performing well with the Galaxy S26 series, while the Galaxy Z Fold 8 lineup is also expected to launch next month. On the other hand, Apple is preparing to unveil the iPhone 18 Pro and iPhone 18 Pro Max in September alongside its first foldable iPhone.
    • At least AMD is still taking Windows 10 seriously (after the oops) before it consumer extended support ends. @WaltC - Memories, 2x Voodoo in SLI with a Riva TNT with an Aureal A3D soundcard.
    • So size is the ONLY selling point????? People have been plugging in PC's to TV's in living rooms for 20+ years. I would take a bigger box for more peformance. Also lot and lots of SFF/Mini ITX build guides out there.
    • My point is, if you buying this instead of a console for TV purposes, that you need to understand that you will not be able to play the most popular MP games with Steam OS. Now if you are not into those games, and into some of the perputual alpha/beta games on Steam then this is an option. I would argue a gaming PC would be the better route, more expensive but take the 1k -1.4k you are about to spend on this thing and build a better one. Because it is running Linux you can overide its 1080p settings. However The Verge complained about its 1080p cap and how you would have to get around it at the CLI, so someone buying this instead of a PS5 or Xbox might have a challege on their hands.
    • A review of Synology's BeeCamera software for the BeeStation Plus by Christopher White Synology is leaning into the BeeStation and the BeeStation Plus, and it's easy to understand why. While power users will want something more customizable, the BeeStation and its more powerful sibling, the BeeStation Plus, are great for those who want a device they can simply plug in, click a few buttons, and have it work as their own personal cloud. Until recently, the device was mostly used for the storage of files, photos, and videos, and with the Plus model, you could install and stream media through Plex. Synology recently released a new free application for the BeeStation Plus called BeeCamera, which is basically a stripped-down version of Surveillance Station. First, let's get the confusing naming out of the way. While you might initially think that BeeCamera is a physical device, perhaps a camera that Synology created specifically for the BeeStation Plus, that would be incorrect. BeeCamera is simply the name for the application that runs on the NAS and on your mobile device. I think the marketing team missed the mark here, but it does fit the other naming on the device, like BeePhotos and BeeFiles, I guess. Camera Support As of right now, only Synology-branded cameras are supported, which many will see as a callback to the drive locking the company implemented and then backtracked on. That said, while I 100% disagree on drive locking, I agree that camera locking for a device made to simply plug and play is the right decision. The whole point of the BeeStation line is simplicity. There are currently three camera model lines available, a wireless device for indoor use, and two PoE models for external use. CC400W (Wi-Fi): Plug it into power using the included power adapter, and connect it to your wireless network. This camera is rated only for indoor use and is the one I was provided to review the BeeCamera. $198.36, in line with the Unifi G6 Compact. BC510 (PoE): A bullet-style camera. Connect it to an Ethernet cable that is providing Power over Ethernet (PoE). This camera is rated for both indoor and outdoor use. $240. TC510 (PoE): A dome-style camera. Connect it to an Ethernet cable that is providing Power over Ethernet (PoE). This camera is rated for both indoor and outdoor use. $240. Although this isn't a review of the actual Synology camera, I did want to note that a positive for the Synology CC400W is that it uses a magnetic base. This means you can mount it on any magnetic surface, which is pretty handy. However, a downside to the camera is that it's powered by a built-in USB cable that's about six and a half feet (two meters) long. This means that the cable will probably be either too long or too short, but more importantly, if the cable is damaged at all, you'll likely need to buy an entirely new camera because there doesn't appear to be a way to replace it, unlike many competitors, like the Unifi G6 Instant. Hopefully, this is something Synology addresses in a future revision of the hardware. The BeeStation Plus supports up to four cameras. Setup The setup of BeeCamera is, like everything in the BeeStation family, very straightforward. Simply make sure you're on at least version 1.5 of the BeeStation OS, and BeeCamera is automatically installed on the device. BeeCamera Setup Screenshots Setting up the CC400W was just as easy. Plug it in, open up the BeeCamera app, and follow the on-screen steps to add the camera. During this process, you'll configure the camera name and how many days of retention you want to keep. The system will also automatically update the firmware for you. The whole thing took only a couple of minutes, excluding the time it took for the camera to update the firmware. Once the camera is connected to the BeeStation Plus, you can manage the various camera settings within the app, although there aren't many to choose from. You're able to configure whether the microphone will record audio (some privacy laws may preclude you from recording it), select what codec to use (H.264 or H.265), configure the color and exposure of the camera, and determine what data you want to overlay onto the video. Finally, you can set up AI detections so that BeeCamera will alert you if it sees certain things. These are all of the common detections you would expect in a camera system, such as people, pets, and vehicles. Under people and vehicles, you can also add extra monitoring for lingering and congestion detection, although pets are currently in "Lab" and therefore have no extra features yet. Recording in 4K using H.265 for 30 days will take roughly 300 GB of storage, which is very reasonable for most regular households, as the BeeStation Plus has 8TB of native storage. If you want to set up detection zones, you can. These are areas that BeeCamera will look at for the various detections, and are helpful if, for example, there's a tree in your frame and you don't want to be notified each time the wind makes the branches move around in the frame. Finally, you can also schedule when the camera should and should not be recording, which is a very useful feature. For example, you may want to record only at night when you're sleeping, but not during the day when you're up and about the house, so you can easily shut the camera off between 8 am and 10 pm. Each hour of each day can be configured to record continuously, only upon a detection event, or disabled completely. You can't fine-tune to record at a specific time, though, only hourly blocks on the hour. Daily Use The best part of BeeCamera is that it's easy and just works. If you only care about being notified when things happen, the mobile app sends those notifications and lets you click the button to bring up the video and see what's going on. For example, when I went out of town and had the camera pointed at the cat tower in our hallway, it was nice to be able to drop in and check that my furry friends were doing okay without me. Initiating the remote connection to the BeeStation Plus through the app is very responsive, but this will heavily depend on your ISP. In my case, using Xfinity, I'm able to go from starting the app to seeing live video in roughly three seconds, which is about the same amount of time it takes to connect to my Unifi UNVR system that costs much more. If you want to see footage from a specific day and time, you can do so using the calendar icon. You can also scroll through the timeline, looking for detections that are labeled in blue (vs. the normal gray when there's nothing of interest). There are buttons that let you go to the last/next detection on the timeline, which is helpful if you missed the notification on your mobile device. That's where the ease of use stops, though. While you can download clips that are flagged by detection, there's apparently no way to select generic time frames you're interested in, and the only place to download is to your phone. In addition, sharing a video shares the actual video, not just a link back to your BeeStation Plus. While that's good from a security and privacy perspective, it's a little awkward for sharing large videos. Limitations While the ease of implementation is great, there are some things that are lacking from BeeCamera. The most obvious is that there is no way to view the footage on the desktop. You can log in to the BeeStation Plus to see how much storage BeeCamera is using, but unlike BeePhotos and BeeFiles, there is no BeeCamera on the web console to manage or view footage. This means you'll be viewing all of your security footage on your mobile device, which is pretty limiting. In addition, there's no way to download the video to your PC without first using your phone as the intermediary. The one exception to this is that you can use BeeFiles to see the raw MP4 files. They're saved in 5-minute increments, and it's just raw data with no detection information or any other way to identify what any of them are. The lack of a way to interact with BeeCamera on the desktop also makes configuration of the cameras more difficult. For example, trying to set up detection zones using a tiny screen and your finger to draw boxes is more cumbersome than it needs to be. This reinforces the idea that BeeCamera is not made for power users. It's also missing some of the more advanced functionality of Surveillance Station. For example, I couldn't find a way to say, "Alert me if the thing in this zone is no longer there." Another major deficiency with BeeCamera, and a feature I suspect may come out in the future, is that while it can detect generic people, there is no specific facial recognition yet. This is an interesting omission, given the fact that other Synology tools can detect specific individuals, and competitors such as Unifi Protect also do it. This is probably a software limitation, so we will have to wait and see if this feature is added in the future. Conclusion If you need a security guard to monitor surveillance cameras to make sure your property is secure, then BeeCamera is not the solution for you. That said, you probably wouldn't be using a BeeStation Plus as the brains behind the system either. BeeCamera (and BeeStation in general) is clearly aimed at households that want to avoid sending personal data to Google and Amazon, and now want to add some cameras to keep an eye on their home and their pets while they're away. BeeCamera excels at doing this. The target market isn't interested in creating cases, tying multiple views together in a single pane of glass, or the like, and for the intended use case, the system works great. Where it starts to fall apart a bit is with more advanced features. Not being able to use a desktop app is a major compromise in my opinion, and having to do all of the configuration on a mobile device is annoying, but not impossible. If you don't want to have a full-fledged NAS device in your home, but still want control over your data (or maybe want an easy way to backup your data for World Backup Day), and want to add a couple of cameras to keep an eye on your house and your pets, this is a great, cheap, and easy way to go, and I suspect more functionality will come over time. If Synology releases a desktop app or at least a way to configure cameras and view footage on a desktop browser, this would be a near-perfect solution for a general home user. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      476
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      88
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!