I am going to looking for a new phone, recommendation please


Recommended Posts

2 hours ago, DevTech said:

https://www.phonearena.com/phones/LG-K10_id9838

 

According to that you have Bands 2, 4 and 12.

 

I get the impression you did not research your radio bands so you just got bat##### lucky instead of bat##### crazy!

 

Also, you need to be on the LTE Plan for it to work right.

I got the phone free, it works, I never felt the need to research it, it works everywhere I go, with the exception of a few stores.

56 minutes ago, jnelsoninjax said:

I got the phone free, it works, I never felt the need to research it, it works everywhere I go, with the exception of a few stores.

maybe my attempt at humor fell flat. Can't complain about FREE!

 

Either way, make sure you are on the LTE plan since it affects the voice bands on that network.

 

2 hours ago, DevTech said:

maybe my attempt at humor fell flat. Can't complain about FREE!

 

Either way, make sure you are on the LTE plan since it affects the voice bands on that network.

 

I understood your humor, I was trying to reply in kind... for now I bought an Asus Zenfone 4 off of Swappa for $50, and according to the specs it does work on the bands that I need. But in a few months time, I should be able to bank enough to purchase a new phone (it is peak season at Amazon with mandatory OT) so I think I will be able to grab a decent new phone in a few months.

  • 3 weeks later...

Hello,

 

I use the previous model (Huawei Honor 5x) for some software testing and it seems to work rather well.

 

Regards,

 

Aryeh Goretsky

 

16 hours ago, jnelsoninjax said:

Is the Huawei Honor 6X a decent phone? I can grab it for ~$140 from Best Buy

A friend of mine had a mid range Huawei (don't know which), and battery life was pathetic after just 3 months. Phone runs very hot too. Maybe it was a one-off device. But hey, all Androids tend to do that nowadays :p

Reminder: every phone made has variations in the Radio Bands.

 

You need to verify that exact model has LTE 2, 4 and 12.

 

Even most Hero Phones don't have all the Radio Bands.

 

The ideal phone would have a Radio that covers all these bands, but that won't happen, so it is important to know what Bands you need and what Bands you might transfer to while you own the phone. Adding in any possible World Travel makes it extra fun:

 

https://en.wikipedia.org/wiki/LTE_frequency_bands

 

Here is a list of every Cell Network on Planet Earth and which Radio Frequency/Bands they use.

 

https://en.wikipedia.org/wiki/List_of_LTE_networks

 

  • 2 weeks later...
On 11/9/2017 at 12:46 PM, jnelsoninjax said:

I am currently using an LG K10, and I hate it, the battery life is horrible and it has a few other annoyances. I have been considering getting The Nextbit Robin, it seems to me to be a decent phone and it is only $120 which I find to be very reasonable. My goal would be to stay below $150, and the only requirement is that it be unlocked and Android. I have an Asus Zenfone 2 that I need to replace the screen on and that will only cost $30, but I would do that for a backup. Please offer me some suggestions as to what brand to look for.

Moto E4. If you're in the United States by the Verizon variant from Walmart for 40$. Purchase an unlock code from eBay for $2. The handset works well on GSM and also has a near stock Android experience and a fingerprint reader. The specs are also a step above your K10. 

  • 4 weeks later...
On 12/20/2017 at 11:02 PM, Timi Cantisano said:

Moto E4. If you're in the United States by the Verizon variant from Walmart for 40$. Purchase an unlock code from eBay for $2. The handset works well on GSM and also has a near stock Android experience and a fingerprint reader. The specs are also a step above your K10. 

I just did that! I had to wait for the local store to get the phone back in stock (3 weeks!) but I am now waiting for the unlock code.

  • Like 1
8 hours ago, jnelsoninjax said:

I just did that! I had to wait for the local store to get the phone back in stock (3 weeks!) but I am now waiting for the unlock code.

SWEET! I think you will like it and it's def a heck of deal. I think there are a lot of different cheap options but its rare to find one with a fingerprint reader. 

 

8 hours ago, Timi Cantisano said:

SWEET! I think you will like it and it's def a heck of deal. I think there are a lot of different cheap options but its rare to find one with a fingerprint reader. 

 

I hope so! I'm still waiting for the unlock code to be able to try it out, but once that comes in then I can (hopefully) toss the K10 in a tote in the shed just in case I ever need a backup phone again!

This topic is now closed to further replies.
  • Posts

    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
    • I did test it a month or so back, but ... the results I expect to be on the first page are not there.
    • Neowin is saying these are good prices? Thats crazy. As others have said they are just ######. Time for big tech to bring down the prices for real not this fake crap.
    • The iFlyTek AINote 2 is among the thinnest E-Ink tablets. It has an EMR stylus, a built-in fingerprint reader, and plenty of built-in AI features. You had me until "and plenty of built-in AI features." That and any company that still does the iProduct naming trope is an immediate pass. It suggests the company isn't very imaginative or creative and is trying to piggyback off another company's success. Extremely lame. Also kind of expensive. Better choices at lower prices out there.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      486
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!