Recommended Posts

Welcome to the Battlestations 2018 thread!
 
If you want to show your fellow Neowinians what your workstation/battlestation looks like, this is the place to do it.
 
When posting, please note the following:

If you plan to img-embed your picture, please try to keep it under 100k. Actually, it's best if you just link to it externally.

If you are going to quote, there isn't a need to quote an img-embeded picture - Just don't do it. Please just reference the post by page number/page link/etc.

The moderators of this forum reserve the right to edit or remove your posts as necessary in order that they will comply with the Community Rules.

 
The Battlestations 2017 thread is not to be used as a means to post images of a pornographic or otherwise provocative nature, so please be mindful of the images that may appear on your battlestation. Please help to keep the thread relevant and safe to browse for everyone.
 
Last year's Battlestations thread is here.

  • Nick H. pinned this topic
  • 3 weeks later...

I though I share my new build, which I just completed: Fractal Design Node 202 (i7 8700k, 32GB DDR4 3200, Zotac GTX 1070, 960 EVO nvme M.2)

 

Decided to retire my LianLi aluminum mini tower i7 3770k and go small and powerful. (let me know if someone is interested in purchasing this, will give a good deal: 16GB DDR3 2400, GTX 570, 600GB Raid 0 7200rpm + 2TB 7200RPM storage)

 

At first I was thinking of just purchasing a small build due to high cost of GPUs but at then end decided to hand pick my components and use my existing GTX 1070 and wait it our for the next gen of GPUs.

 

As stated in the link I decided to go for the compact Fractal Design Node 202 case. It's only slightly bigger than my PS4 and definitely more quiet.

When picking components for the build I had to keep in mind the small space I will have available to work with within the case.

 

CPU/Heat-sink Cooler: went with the i7 8700k and to keep it cool in such a limited space used Scythe's BIG Shuriken 2 Rev. B 45.5 CFM Sleeve Bearing CPU Cooler.

 

Thermal Compound: I used Gelid Solution GC-Extreme 3.5g thermal paste between the CPU and the heat sink. Rated as best performing thermal paste but I do recommend warming it up before aplication by placing the syringe in a zip-lock bag and placing it under hot water.

 

RAM: Low profile Corsair - Vengeance LPX 32GB (2 x 16GB) DDR4-3200

 

Motherboard: Gigabyte's Z370N. Mini ITX with 2 nvme m.2 slots so I can run my Samsung 960 EVO 500GB in Raid 0

 

Storage: My OS and some games are installed on the Raid 0 2x Samsung 960 EVO 500GB, and my other files are located on a Crucial 1TB MX300 SSD (Small, fast, and now spinning drives)

 

GPU: I used the Zotac GTX 1070 AMP! edition as I already had it and did not feel like spending $1000+ to get a 1080ti. Runs everything at 1440p so its good enough. UPDATED TEMPS: Idle @29C & Max Load @75C (Had to play here with the case fans and create custom temp grid profiles for each in order to optimize directional airflow)

 

Power supply: Corsair SF 600. Small, powerful, fully modular.

 

Case Fans: I used Noctua's slim 120mmx15mm fans so there is more space between the GPU and the fans. In some other build people used 120mmx25mm fans.

 

Overall experience: fun to build and really happy with final product. Case makes no noise when I do regular MS Office work, web surfing, movie watching and email checking. CPU fa is the only think spinning but is doing it at 950RPMs and 10-12dbs. GPU fans are off when temp of gpu is below 40C.

Fans kick-in in higher RPMs when playing games like Battlefront II, GTA V, Witcher 3, Destiny 2 but the highest noise the Noctua fans make are 24db, and CPU fan is slightly audible, but not very notifiable when gaming and fraging other people :)

 

Node1m.jpgNode2m.jpg

Node3m.jpgNode4m.jpg

1 hour ago, Mindovermaster said:

I love that case, Euphoria. :D

Yeah, thanks! (Y) As you can see it's sitting on the top of my mini tower and is about a third of its size.

It can also be placed horizontally like a game console. BTW those are magnetic filters that originally should be placed inside the case but for convenience and accessibility for cleaning I placed them outside the case.

 

Just now, Euphoria said:

Yeah, thanks! (Y) As you can see it's sitting on the top of my mini tower and is about a third of its size.

It can also be placed horizontally like a game console. BTW those are magnetic filters that originally should be placed inside the case but for convenience and accessibility for cleaning I placed them outside the case.

 

I saw another case similiar to that that had the PCI-e extender to route to the back. :)

1 minute ago, Mindovermaster said:

I saw another case similiar to that that had the PCI-e extender to route to the back. :)

Yep, love the way they've done this. The GPU is sitting in a separate compartment with the help of the PCI-e extender so its heat does not affect the temperature of the CPU.

So I added a small little mod to the build... The WiFi antenna that comes with the Z370N Gigabyte motherboard has cables that end into a plastic stand with a magnetic footing... This looks ugly and also adds to the size and complexity of an already small case. So I thought of finding an alternative.


I used a pair of SMA female to RP-SMA male adapters and a Makerfire 2pcs 2.4G 5.8G FPV TX Antenna SMA Male Dipole Whip FPV Antenna.

They end up working perfectly fine with no degradation in signal and download and upload bandwidth. No more tangling antenna cables from the back of the case.

61fsoSjRinL._SX679_.thumb.jpg.8405eee129f2ed784ddc13eca0dc6ac6.jpg61L0NEsXy9L._SL1000_.thumb.jpg.564a9628376dc9674bd9fb8f56454b5a.jpg

I tried using a regular antennas like the HUACAM HCM82 2x 8dBi 2.4GHz 5GHz 5.8GHz Dual Band Wireless Network WiFi RP SMA but the antenna ports on the motherboard are so close together that HUACAM antennas could not fit next to each-other due to the large diameter of the RP-SMA screw-in port. Since I had to do some research and some trial and error, I thought I share it here in case someone else is wondering and looking for an antenna alternative.

41zjXx18MFL.thumb.jpg.d50d5770ffd2d9438b38c325a660dbac.jpg

  • Like 2
  • 1 month later...

Ive rejigged some items so time to post for 2018 :)

 

Sig Rig

  • Asus Strix H S270
  • i7 7700k @ 4.8ghz per core.
  • Corsair AIO cooler 115i
  • 3x140mm Corsair static low noise fans (2 on rad, 3rd top exhaust)
  • 120mm Statitc low noise fan (rear exhaust)
  • EVGA 1080ti Founders Ed
  • EVGA Powerlink
  • EVGA 650W GS modular supply
  • 2x 123gb Samsung Evo 840 (RAID0 Striped) 256Gb Vol (1Gb/sec R/W) (behind mobo tray)
  • 4x 256Gb Samsung 850 Evo (RAID0 Striped) 1Tb Vol (2Gb/sec R/W) (inside 3.5" hdd bays under bottom shroud)
  • 2x8 Gb Corsair DDR4 3200Mhz LED Ram
  • Razer Chroma v2 Mech
  • Razer Deathadder LH Mouse
  • Samsung S27D590C Curved 1080p
  • Technics mini-seperates optical input.
  • W10 pro
     

1.thumb.jpg.9f248a1bbad6d8f7de71bfb4132ee325.jpg2.thumb.jpg.821d4dab0a5032598e545a09cd69b738.jpg

3.thumb.jpg.0fb5c8c0f4ebed27d5923fb3e5d6c579.jpg6.thumb.jpg.498306abdc031e5aa46405da4b176277.jpg

 

 

5.thumb.jpg.fb2b1881a536503a85eb58680382e56e.jpg

 

4.thumb.jpg.b1883c2233708514d3cc6baaafdb95ca.jpg

 

Tbh the airflow is surplus with the 115i and the tis founders cooler, rarely is the air warm from the exhuast fans, they dont kick in until the CPU hits 50C these days, easier on the ears. cpu idle temps hover around 28C fully OC boost mode cpu never gets past 50C :) the 115i is a beast of a radiator.

 

4K monitor is last piece.

4 hours ago, Mando said:

Ive rejigged some items so time to post for 2018 :)

 

Sig Rig

  • Asus Strix H S270
  • i7 7700k @ 4.8ghz per core.
  • Corsair AIO cooler 115i
  • 3x140mm Corsair static low noise fans (2 on rad, 3rd top exhaust)
  • 120mm Statitc low noise fan (rear exhaust)
  • EVGA 1080ti Founders Ed
  • EVGA Powerlink
  • EVGA 650W GS modular supply
  • 2x 123gb Samsung Evo 840 (RAID0 Striped) 256Gb Vol (1Gb/sec R/W) (behind mobo tray)
  • 4x 256Gb Samsung 850 Evo (RAID0 Striped) 1Tb Vol (2Gb/sec R/W) (inside 3.5" hdd bays under bottom shroud)
  • 2x8 Gb Corsair DDR4 3200Mhz LED Ram
  • Razer Chroma v2 Mech
  • Razer Deathadder LH Mouse
  • Samsung S27D590C Curved 1080p
  • Technics mini-seperates optical input.
  • W10 pro
     

1.thumb.jpg.9f248a1bbad6d8f7de71bfb4132ee325.jpg

3.thumb.jpg.0fb5c8c0f4ebed27d5923fb3e5d6c579.jpg

 

 

 

 

4.thumb.jpg.b1883c2233708514d3cc6baaafdb95ca.jpg

 

Tbh the airflow is surplus with the 115i and the tis founders cooler, rarely is the air warm from the exhuast fans, they dont kick in until the CPU hits 50C these days, easier on the ears. cpu idle temps hover around 28C fully OC boost mode cpu never gets past 50C :) the 115i is a beast of a radiator.

 

4K monitor is last piece.

Clean setup and great job on wiring the cables!

Yeah have a 1440p screen... was thinking of jumping to 4k but it's still too expensive for what I want.

Acer just came up with a 4k 144MHz gsync screen but with price at $2k I think I'll wait a bit so that competition drives cost down.

  • 4 weeks later...

This thread is pretty quiet this year. Not an awful lot has changed since last year but here she is, built in 2014 and still going strong.

 

opF9GDU.jpg

 

NQqnTYe.jpg

Edited by Broughton
  • 2 months later...

Hey guys,

 

I spent a lot of time away from PC building and stuck to Macs and Laptops for years. Last year I decided to build a gaming PC. My plan was to spend as little as possible on quality components and get the best bang for my buck. I wanted something fairly compact, tidy and... plain. I chose components that were sorta greys originally. And later when I added LED lighting I thought I'd throw in a bit of orange.. But I can make it any colour I like.. using a dodgy method. ?

 

I had to really squeeze in the CPU cooler. Literally scraping metal to metal getting it in place!

 

Anyway here goes. Apologies for the photo quality. I don't really put the system in a well lit place... I've just attached them to the post, but sure how they'll display but hey.

 

So the desk is basically an Ikea one I took from my old house which used to be decorated in red. I'll probably change it eventually to something a bit wider and neutral in colour. And some of the bits I got from my old job which went through liquidation and I was able to get the Benq monitor (which is why they don't match.., hey, it's free. Might as well use it!) and the G502 Mouse for free.

 

 

The last photo is where the little controller is for the LED colour. It's basically sposed to be a front panel controller but I tore it down to bits and just hid it in a space behind the rear panel..

 

Anyway, Spec:

 

Case: NZXT S340

CPU: i7 7700K, Overclocked to 4.9GHz

Cooler: Corsair H180i V2

PSU: Corsair CX650M

RAM: 16GB Team Group DDR4 1066MHz (2x 8GB)

Motherboard: ASUS Prime Z270-P

Graphics: EVGA GeForce GTX 1080 8GB

Storage: 1x SanDisk Ultra II 960GB SSD, 1x 240GB WD Black M.2 NVMe (Boot)

Network: Some TP-Link 802.11ac WiFi adapter, but I use a Netgear Orbi RBK50 with LAN Cable usually

Monitor: 1x Acer RT240Y 1080p, 1x BenQ GL2250H 1080p

Speakers: Logitech Z130

Headphone: Pioneer HDJ-1500

Mic: Blue Snowball Aluminium

KB/Mouse: Corsair K55 RGB Keyboard, Logitech G502 RGB Mouse, some Corsair Mouepad

IMG_3038.jpg

IMG_3039.jpg

IMG_3040.jpg

IMG_3041.jpg

IMG_3042.jpg

IMG_3043.jpg

IMG_3046.jpg

  • 1 month later...

pic2.thumb.jpg.babca9173672db71d83adfd19061e67b.jpgpic1.thumb.jpg.175511557dc7ddf7430637a7509cb275.jpgpic3.thumb.jpg.d37eadbc968b4d8601f90be7969380e8.jpgpic4.thumb.jpg.6c892e61cdfa318f87db059f758ecd42.jpg

 

 

 

This is my first build in a couple of years.

I was looking for something which would be fun to setup, stand up to a 2 year old should they decide to mess with it, be able to act as a file-server, gaming rig, hypervisor, et. all.

Probably going to upgrade the CPU next year when the prices for the second generation TR drop in price. (2950X)

I still have to link the HUE lights in the room to the case fans / Razer peripherals and then it is going to be quite the show. :)

 

Specs:

 

Case: Thermal Take View GT 20

PSU: Seasonic 850W Gold X-Series

CPU: AMD Threadripper 1900X

MOBO: Gigabyte x399 Designare EX

COOLER: NZXT x72 mounted at the top of case

VGA: EVGA Nvidia 1060 GTX AC 6GB

RAM: CORSAIR Vengeance LPX 32GB (4 x 8GB) 288-Pin DDR4 SDRAM

SSD: WD Black PCIe Gen3 x4 NVMe M.2 2280 500GB Read:3400 Mb/s,Write: 2500MB/s SSD (WDS500G2X0C) x2 (Raid1)

HDD: Seagate 8TB IronWolf NAS SATA 6Gb/s NCQ 256MB Cache 3.5-Inch Internal Hard Drive (ST8000VN0022) x4 in (Raid 10)

OS: WIndows 10 Pro | CentOS 7.5 x64

  • 1 month later...

Corsair 280 Crystal matx case

Corsair cx 500w PSU

Corsair lighting Pro controller 

4x corsair a-rgb 120 LL fans

4 x corsair a-rgb light strips 

AMD Ryzen 2600 @ 4.05Ghz

Empire Gaming 240 AIO 

ASUS B450M-A motherboard

16GB Hyper X predator a-rgb Ram (2933mhz CL15) @ 3200mhz

M.2 Samsung 970 EVO (250Gb)

2TB WD HDD

Gigabyte 1060 WINDFORCE oc 6gb 

Windows 10 Pro

 

(I've turned on all the RGB in the pic its not normally that in your face lol) 

 

20181204_173756.jpg

20181213_121755.jpg

  • Nick H. changed the title to Show us your Battlestations

AMD Ryzen 7 2700X OC'd at 4.2 GHZ

Cooler Master MasterCase H500 ATX Mid-Tower

Asus ROG Crosshair VII Hero (WI-FI)

32 GB G-Skill RAM

Nvidia Geforce RTX 2080

Primary display: Yamakasi 4K

Secondary display: LG Ultrawide (HDMI) 2K

Logitech G910 keyboard

Cellphone is Poptel P9000 Max

46598986672_1a3eeb9415_c.jpg

 

46651583181_715403044a_c.jpg

  • Like 2
Just now, warwagon said:

I guess gamers really do like RGB.

It's hard not to buy new pc parts without rgb now. You would actually have to be extremely selective with your parts and probably even have to choose inferior ones just to avoid it.

4 minutes ago, trag3dy said:

It's hard not to buy new pc parts without rgb now. You would actually have to be extremely selective with your parts and probably even have to choose inferior ones just to avoid it.

I have a hard time believing that. Shouldn't be hard to find a GPU, CPU cooler, Ram and a case that doesn't have RGB. 

2 hours ago, warwagon said:

I guess gamers really do like RGB.

I am indifferent about RGB, I like it, but it is not a have to have item, it just so happened that the case I wanted had the RGB in it already so I build around it.

13 hours ago, warwagon said:

I guess gamers really do like RGB.

 

 

when the case and mobo and ran and fans support the same implimentation...also its sat in the livingroom so i went down the show case route as its a conversation piece - tho alot of people think its some sort of speaker? :/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • AMD RX 9070 GRE AI, Blender benchmarks vs 9070 XT, 7800XT, Nvidia RTX 5070, 4070 by Sayan Sen Earlier this week, we shared the first part of our review of AMD's new RX 9070 GRE. It was about the gaming performance of the GPU, and we gave it an 8 out of 10. As a follow-up, similar to how we did with the 9070 XT and non-XT, we are doing a dedicated productivity review for the RX 9070 GRE as well, where we compare it against the 9070 XT, 9070, 7800 XT, as well as Nvidia's 5070 and 4070. This will include AI, rendering, compute, and more benchmarks. AI performance, especially, is a very important metric in today's world, and AMD also promised big improvements thanks to its underlying architectural improvements. We will be pitching it against the data we already have for the RX 9070, and RX 9070 XT, but also the Nvidia 5070 FE, MSI GeForce RTX 4070 VENTUS 2X 12G, and Gigabyte Radeon RX 7800 XT GAMING OC 16G as they are in a similar price class, but also because we do not have a comparable 5060 Ti card lying around here that we can compare it against. Before we get underway, this is a collaboration between Sayan Sen and Steven Parker, who lent me his test bed. Also, there was no editorial input from AMD. First up, the specs of the RX 9070, 9070 XT, and 9070 GRE, which were given to us by AMD: Radeon RX 9070 GRE Radeon RX 9070 Radeon RX 9070 XT Boost Clock: Game Clock: up to 2.79GHz up to 2.20GHz up to 2.52GHz up to 2.07GHz up to 2.97GHz up to 2.40GHz Stream Processors 3,072 (48 CU) 3,584 (56 CU) 4,096 (64 CU) Ray Accelerator 48 56 64 AI Accelerator 96 112 128 ROPs 96 128 Texture Mapping Units 192 224 256 Memory 12 GB GDDR6, 18Gbps Clock, 192-bit Bus 432 GB/s 16 GB GDDR6, 20Gbps Clock, 256-bit Bus Effective Memory Bandwidth: 640 GB/s Infinity Cache 48 MB (3rd Gen) 64 MB (3rd Gen) Card Bus PCI-E 5.0 X16 Output 2x HDMI 2.1b 2x DisplayPort 2.1a Power consumption 220W 304W Recommended PSU 650W 750W Slot width 2x 3x Price (SEP) $549 $599 As you can see from the specs above, it is less than the standard RX 9070 in every way that counts, except for slightly higher Boost and Game clock speed. Design Moving on, the RX 9070 GRE we were given is an XFX Swift triple-fan, dual-slot design with two 8-pin connectors. At 30cm (self-measured), it will fit in most systems easily. There is no RGB either. The AMD Radeon RX 9070 GRE by XFX from all angles. Test system Our test system consists of the following: Lian Li O11 Dynamic Mini V2 Flow (Amazon|Newegg) ASUS Z890 ProArt Creator WiFi (Amazon|Newegg) Intel Core Ultra 7 270K Plus (Amazon|Newegg) Thermal Grizzly KryoSheet - 44x37 (Amazon|Newegg) 2x 16GB G.Skill Trident Z5 RGB (7200 MT/s in XMP) (Amazon|Newegg) Sabrent Rocket4 Plus 2TB SSD (Amazon) Windows 11 25H2 (Build 26200.8246) AMD shared a press driver based on the recently released Adrenaline 26.5.2 that we were required to use. We now move on to our benchmarks. First up, we have Geekbench AI running on ONNX. For some reason, the 9070 GRE does exceptionally well here in both half-precision (FP16) and single-precision (FP32). It manages to beat the RTX 5070 and RX 9070 non-XT, and is only behind the 9070 XT. Since Geekbench runs in short bursts instead of continuously hammering the graphics card, it seems the GRE's faster boost clocks are helping here. Next up, we move to the UL Procyon AI test suite, starting with the image generation benchmark. We chose the Stable Diffusion XL FP16 test since it is the most intense workload available on Procyon. The Nvidia cards do very well here, as even the 4070 out-muscles AMD's best fairy easily. The positive thing about the GRE is that it gets quite close to the 9070 non-XT in this test; this indicates that the VRAM does not play a very big role here, as SD XL relies on float16 (FP16). So this is something to keep in mind again. If you wish to work with float32 AI workloads, graphics cards with larger than 12 GB buffers would likely emerge as victors. Regardless, the gains are still massive on AMD's 9000 series compared to the 7000 series. Following image generation, we move to the text generation benchmark. This is one test where the 9070 GRE struggled, quite a lot. It seems that the 12 GB VRAM and lower memory bandwidth of the new Radeon 9070 GRE are hurting it quite a bit; the split is massive, especially in a test like Llama2, which packs 13 billion parameters. As such, in all the tests, the 9070 GRE is the slowest of the lot. Next, we tried Blender, and here the AMD GPUs were beaten by Nvidia. Rendering is something the Green team has always had a lead over the Red side, and it has not changed so far. On the positive side, though, the 9070 GRE shows significantly better results than the 7800 XT, which means AMD is on the right path. Catching up to Nvidia, though, will require a lot more effort. And we hope HIP and ROCm can keep improving. Wrapping up AI testing, we measured OpenCL throughput in the Geekbench compute benchmark. The RX 9070 GRE alongside the 9070 did not fare well here at all, even falling behind the 7800 XT. Interestingly, even the RTX 5070 could not beat the 4070 on OpenCL, so perhaps this suggests that OpenCL optimization may not have been a priority for either AMD or Nvidia in the modern era. Conclusion We reached the end of our productivity performance review of the 9070 GRE, and we have to say it's a mixed bag. Unlike the 9070 and 9070 XT, the GRE excels in some areas while losing ground fairly easily in others. Similar to how it happened in gaming, any time the card's memory subsystem gets hammered, it tends to fall behind the others. This was the case with text generation, wherein we saw the VRAM sometimes hit its maximum available 12 GB of usage with larger model sizes. So what do we make of the RX 9070 as a productivity hardware? It can certainly be used, but you have to know it has its limitations. For those looking for a GPU that can deal with more, AMD recently unveiled the Radeon AI PRO R9700, which is essentially a 32 GB refresh of the 9070 XT with some additional workstation-based optimizations. On a similar note, the new Ryzen AI Halo platform is something you can consider if you want to set up a local AI processing station. Considering everything, we rate AMD's Radeon RX 9070 GRE a 7.5 out of 10 for its productivity performance. Price is less of a factor for those looking at productivity cases compared to those considering the GPU for gaming, and as such, we felt it did quite decently on many occasions and can be handy if you need a 12 GB GPU and, for some reason, don't want to get Nvidia. Purchase links: RX 9070 / XT / GRE (Amazon US) As an Amazon Associate, we earn from qualifying purchases.
    • Does anyone here know if these updates are integrated into the UUP dump isos?
    • Motrix Next 3.9.4 by Razvan Serea Motrix Next is a modern, open-source cross-platform download manager built as the official next-generation successor to the original Motrix project. It has been completely rewritten using Tauri 2, Vue 3, TypeScript, and Rust, while still relying on the powerful Aria2 download engine for high-speed multi-protocol transfers. The app supports HTTP, HTTPS, FTP, BitTorrent, ED2K and magnet links, offering advanced features like multi-connection acceleration, task scheduling, bandwidth control, and batch download management. With a significantly reduced install size (around 20MB), it focuses on being lightweight, fast, and resource-efficient compared to traditional Electron-based download tools. Designed for Windows, macOS, and Linux, Motrix Next delivers a clean, modern UI inspired by Material Design 3 principles, with smooth animations and a minimal workflow. It improves usability through better download organization, system tray integration, and enhanced torrent handling including selective file downloads and tracker management. Motrix Next features: Multi-protocol downloads — HTTP, FTP, BitTorrent, Magnet, .torrent, ED2K, and Metalink tasks BitTorrent — Selective file download, DHT, peer exchange, encryption controls, metadata caching, GeoIP peer flags, and tracker probing Browser extension integration — Embedded Extension API with independent authentication, download confirmation, smart auto-submit, filename hints, referer/cookie forwarding, and real-time controls (Chrome Web Store · Edge Add-ons) Safe filename handling — Content-Disposition, RFC 2047, non-UTF-8, percent-encoded, and extensionless URL resolution with path traversal sanitization Download organization — Favorite and recent folders, optional file-type categorization, stale-record cleanup, and completed history backed by SQLite Concurrent downloads — Independent controls for active tasks, HTTP connections per server, segments per file, and BT peer limits Speed control — Global and per-task upload/download limits with day-of-week and time-of-day scheduling System integration — Tray operation, optional tray speed display, macOS Dock badge/progress, protocol handlers for magnet://, thunder://, and motrixnext:// Lightweight mode — Destroys the WebView on minimize-to-tray while Rust keeps the engine, task monitor, notifications, history, and extension routing alive Notifications and power options — Native task start/complete/failure notifications, keep-awake during downloads, and optional shutdown after completion Network controls — Scoped proxy support for downloads, app updates, and tracker updates, plus system proxy detection Auto-update channels — Stable, Beta, and Latest Across Channels policies with separate download and install phases Diagnostics — Structured logs, exportable diagnostic ZIPs, database integrity checks, automatic DB rebuild, and Linux GPU rendering fallback Personalization — Light/dark/system theme, 10 color schemes, 26 languages, and first-launch system language detection Motrix Next 3.9.4 changelog: Motrix Next 3.9.4 promotes the 3.9.4 beta cycle to stable. This release refreshes bundled engine binaries, improves task detail readability and copy actions, expands link handling for magnet and ED2K workflows, polishes responsive navigation and text wrapping, updates browser extension documentation, and refines network preference controls. New Features Task Detail copy actions — Added copyable values for task metadata and reusable render functions for long text fields. Magnet and ED2K lifecycle support — Added task lifecycle handling for magnet and ED2K links. History cleanup for deleted tasks — Deleted tasks can now remove matching history records. User-Agent management — Added user-agent management and improved related network preference controls. Browser extension documentation — Added the Firefox Add-ons link for the Motrix Next extension. Improvements Engine binaries — Updated bundled binaries for supported architectures. Task Detail readability — Long task names, URLs, tracker values, and copyable metadata now render more clearly. Deletion messaging — Refined localized task deletion text for clarity and consistency. Text wrapping — Improved URI input wrapping and task name multiline display. Navigation layout — Improved sub-navigation responsiveness. Disk allocation default — Changed the default file allocation method to trunc. Proxy controls — Improved proxy button styling in network preferences. Download: Motrix Next 64-bit | ARM64 | macOS ~20.0 MB (Open Source) Links: Website | macOS / Linux | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • NVIDIA officially supports Ubuntu, as linked above with the GeForce NOW Hands on I did in collaboration with Paul Hill.
    • TO be clear I am not running linux today, however I keep thinking about it. And I want to make sure there are minimal obstacles if I decide to make that switch in the coming months.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      244
    3. 3
      Steven P.
      72
    4. 4
      FloatingFatMan
      66
    5. 5
      +Edouard
      66
  • Tell a friend

    Love Neowin? Tell a friend!