Recommended Posts

  • 3 weeks later...
  • 1 month later...
  • 1 month later...

Not sure why I didn't reply in here yet 😛 I built my new system last year in stages

 

IMG_20191111_111745.jpg

IMG_20191025_095818.jpg

    

  • Gigabyte Z390 Aorus Pro WiFi    
  • Intel Core i5-9600K
  • be quiet! Pure Base 600
  • be quiet! Straight Power 11 550W
  • Cryorig H7
  • G.Skill Ripjaws V F4-3200C16D-16GVKB (32 GB)
  • KFA2 GeForce RTX 2070 Super EX
  • Samsung 970 Evo Plus 256GB (C:\Windows) 
  • Intel 660P 1TB (D:\Data)
  • Toshiba P300 3TB SATA
  • Samsung CRG9 (49" 5120x1440 @120Hz) FreeSync 2
  • Briefly had a cheap Logitech G613 keyboard but I didn't like it, went back to my Logitech K800 which broke last week, ordered a Razer Blackwidow Elite (orange switches)
  • Logitech G502 Hero mouse

The pics are from last year so once I have the Razer keyboard I will post an updated pic of my setup. I do not have a plexiglass side panel, it is on my list of things to order Lol.

 

I guess you could call my setup Gaming on a budget 😛 I will most likely get a i9-9900K at some point (and new PSU) but I think that's a year out at minimum.

  • Like 2
  • Thanks 1
4 hours ago, Steven P. said:

Yeah the motherboard, memory, video card and my mouse all have RGB 😛 

Didn't see that. Guess the light in the picture blocked it out.

8 hours ago, jnelsoninjax said:

@Steven P. How do you like the curved monitor? I was tempted to buy one at one time! :)

Took a while to get used to but now I can't imagine being without it, it is so immersive! 😛 

I have no rgb these days, however bonus points for retro rgb?

 

The metadata on this photo says it was taken on 23.01.2004:

 

neons-2004.thumb.jpg.bf7ceea1154f9c3edc64413b844f1fa8.jpg

 

This was the first PC case I purchased. I believe it was the cool thing to have neon light strips in your PC at the time, I then expanded upon that with a few additional case fans I got for £1 each that were a few different colours.

 

Pretty sure at the time that PC contained:

  • Athlon XP 2200+
  • 512MB SD Ram
  • 80gb and 120gb IDE hard drive
  • GeForce MX 440
  • Windows XP

These days I preferer my PC to be incognito and not light up like a Christmas tree, as nice as I think modern rgb is on setup photos!

  • 3 months later...
  • 4 weeks later...

Since my local retailer is indicating my Asus ROG STRIX 3080 won't arrive for at least another month... I bought a temporary video card to complete the build. Not to monopolize the thread, but here's my current cable routing :)

 

 


 

20201008_172820.jpg

20201008_173216.jpg

20201008_183452.jpg

  • 1 month later...

nBZuXcM.jpg

 

This desk has served me well for nearly two decades. I also have kvm switch connected to the Dell Poweredge rig, dell docking staion placed behind the right speaker, and Raspberry Pi 4 to use fiio dac and wireless keyboard and mouse. Gaming gear is connected to Gaming rig (see sig)

  • Like 2
  • Thanks 1
  • 4 months later...

 

Desk Area.

Build

 

Screen: Samsung 49" C49RG90

Case: Cooler Master MasterBox NR600

MoBo: ASUS ROG CROSSHAIR VIII HERO X570

CPU: AMD Ryzen 9 5900X

CPU Cooler: be quiet! Dark Rock Pro 4

RAM: G.Skill 32GB (2x16GB) DDR4 3600MHz CL16 Trident

GPU: ASUS GeForce RTX 3090 24GB ROG STRIX Gaming OC

PSU: Corsair RM850W v2 White Series

NVME Storage 1: Samsung 970 EVO Plus 250 GB

NVME Storage 2: Samsung 970 EVO Plus 1 TB

SATA Storage 1: Samsung SSD 850 VO 500 GB

SATA Storage 2: Samsung HD502IJ

SATA Storage 3: Samsung HD502IJ

SATA Storage 4: ST2000DM001-9YN164

External Storage 1:  ST8000DM004-2CX188

External Storage 2: Toshiba DT01ABA300

Fans: 6x Noctua NF-S12A PWM chromax.black.swap

 

 

14 minutes ago, KiHu said:

 

Desk Area.

Build

 

Screen: Samsung 49" C49RG90

Case: Cooler Master MasterBox NR600

MoBo: ASUS ROG CROSSHAIR VIII HERO X570

CPU: AMD Ryzen 9 5900X

CPU Cooler: be quiet! Dark Rock Pro 4

RAM: G.Skill 32GB (2x16GB) DDR4 3600MHz CL16 Trident

GPU: ASUS GeForce RTX 3090 24GB ROG STRIX Gaming OC

PSU: Corsair RM850W v2 White Series

NVME Storage 1: Samsung 970 EVO Plus 250 GB

NVME Storage 2: Samsung 970 EVO Plus 1 TB

SATA Storage 1: Samsung SSD 850 VO 500 GB

SATA Storage 2: Samsung HD502IJ

SATA Storage 3: Samsung HD502IJ

SATA Storage 4: ST2000DM001-9YN164

External Storage 1:  ST8000DM004-2CX188

External Storage 2: Toshiba DT01ABA300

Fans: 6x Noctua NF-S12A PWM chromax.black.swap

 

 

Nice! We have the same screen :) 

 

20210407_235011.jpg

 

Lit up at night, the phone makes everything brighter than it actually is.

20 minutes ago, Steven P. said:

Lit up at night, the phone makes everything brighter than it actually is.

Try turning off the flash  🤣

  • Haha 2
  • 2 weeks later...

It has been an exceptionally long time Since I have posted one of these, I wouldn't say its RGB, its all Purple

 

Specs:
CPU :Ryzen 9 3950X

RAM: 64GB DDR4 3200
Storage: 2x 2TB Samsung 970 Evo Plus
Graphics Card: Nvidia 3090 FE
Cooler, NZXT Kraken

Monitor: Samsung Odyssey G9 (49in Curved Ultrawide 5120x1440)

Chassis: NZXT H510

Mobo: Gigabyte X570 Pro Wifi (ITX) I started with an NZXT H1 chassis but they were a fire hazard.

 

Also pictured is a purple 3D printed nut and bolt I use for Sag stability on the graphics card.
I have also created a vinyl skin for the window of the Kirin Tor logo from World of Warcraft.

 

20201123_113603.jpg

20201123_170002.jpg

20201202_164106.jpg

20210416_195205.jpg

  • 4 weeks later...

New monitors. I finally got rid of my 3x 27" HP 27FW 1080p monitors (donated to local school) for 3x MSI 27" Optix MAG272CQR 1440p 165hz. I was apprehensive about curved monitors at first. I think a single 27" curved monitor would be hard to get along with, but for a triple monitor setup arch and head swivel feels quite natural. Also, going from 75hz to 165hz is a game changer. Everything is buttery smooth and my 2080 Ti stills seems to have the grunt to run beyond 4K res playable. Before and after below, rest of setup on bottom of page 3.

 

Before:

 

ANcsj05.jpg

 

After:

 

20210514_221751.jpg

Edited by Broughton

Nothing really new ... however I did build a computer for work.  

 

This computer died...

 

old-comp.thumb.jpg.f81890d0285badc454081fa5d417a70e.jpg

 

I couldn't bring it back to life and neither could our IT department.  I suspect the motherboard went out or the onboard graphics.  This was a Pentium 4 system which controlled our thyroid uptake probe and well counter.  We received a $5K quote from Capintec for just the computer.

 

That was not acceptable to me ... the whole unit is in the process (a tedious one) to be replaced but we needed something now.

 

Sooo....I put together this Frankenstein from old components I had laying around (motherboard from my old HTPC, CPU and case from my old gaming rig) ...brings you back to the days before cable management and no RGB:

 

comp6.thumb.jpg.4d75f4277d2b86c2b1709a53500d1ab0.jpg

 

comp5.thumb.jpg.fe75b2ba6d7f2fdcd2f8368b46c72f20.jpg

 

comp4.thumb.jpg.07c594e6f29225b1e9226d3fcce3211e.jpg

 

comp3.thumb.jpg.4c76282d175de772208f74e1c04a36cc.jpg

 

...and pretty much why the Capintec system is expensive...

 

comp2.thumb.jpg.45891169311bd3fbc58fa4806dabcc20.jpg

 

....this Multichannel Analyzer (MCA) card which connects to the well counter and thyroid probe.

 

System specs:

CPU:  Intel Xeon E3110 ... I believe the cooler is the stock one from my i5-4360. Not sure though.

Motherboard:  Gigabyte GA-E7AUM-DS2H w/ onboard GeForce 9400 graphics

RAM:  4GB 

Case: Lian Li A10

Power supply:  Xigmatek something-watts.  Got it for free many years ago...never used it.

OS:  Windows XP SP2

HDD:  Barracuda 80GB

 

I originally tried installing a fresh copy of XP, the drivers for the MCA board and the Capitnec software ... but couldn't get it to work.  The software would freeze with the MCA board installed and the registration key wouldn't work for the software (when I could run without the MCA card installed).

 

I ended up just taking the HDD out of the old Dell ... to my surprise it booted without blue screening, I installed the motherboard drivers and everything just worked.  Saved the US taxpayers $5K.

 

Yes...it is XP ... but no ... it isn't on the network and we don't enter patient information into this computer ... instead we use a non-identifiable accession number as the patient ID.

 

Personally, nothing has changed at my home setup since this 2016(!) post...except maybe one or two new SSDs.

 

 

 

 

  • Like 5
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Funny, but I didn't had the issue. All PC's at work are Dell and we had the culprit version of Support Assist for about 2 weeks until we got the new one. No problem at all. And for checking you can also use Dell Command Update, no need to search in windows settings. Just check the Upgrade History.
    • YES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    • Apple are scared of their customers! They have built a brand over the years of "it just works out of the box", but that slows innovation. Samsung's master stroke was the Galaxy Ultra: "Let's cram everything into one handset, make it so stupid only real nerds will love it, some of the features will work, some won't, but the audience will have such a high tolerance they won't care". Apple has no such device and so they are constantly worrying these days about the fallout of creating a new experience that customers might not like. I know it is often cited the reason they don't build a touchscreen Mac Book is they don't want to cannibalise the the iPad market, but I think it's equally cold feet after the criticism Microsoft receive trying to make a touch compatible desktop OS
    • HandBrake 1.11.2 by Razvan Serea HandBrake is an open-source, GPL-licensed, multiplatform, multithreaded video transcoder, available for MacOS X, Linux and Windows. Handbrake can process most common multimedia files and any DVD or BluRay sources that do not contain any kind of copy protection. Here is a detailed breakdown of HandBrake’s features: Built-in Device Presets—Get started with HandBrake in seconds by choosing a profile optimized for your device, or choose a universal profile for standard or high quality conversions. Simple, easy, fast. For those that want more choice, tweak many basic and advanced options to improve your encodes. Supported Input Sources—Handbrake can process most common multimedia files and any DVD or Blu-ray sources that do not contain any kind of copy protection. Outputs: File Containers: .MP4(.M4V) and .MKV Video Encoders: H.265 (x265 and QuickSync), H.264(x264 and QuickSync), H.265 MPEG-4 and MPEG-2, VP8 and Theora Audio Encoders: AAC / HE-AAC, MP3, Flac, AC3, or Vorbis Audio Pass-thru: AC-3, E-AC3, DTS, DTS-HD, TrueHD, AAC and MP3 tracks Additional features: Title/ Chapter Selection Queue up Multiple Encodes Chapter Markers Subtitles (VobSub, Closed Captions CEA-608, SSA, SRT) Constant Quality or Average BitRate Video Encoding Support for VFR, CFR and VFR Video Filters—Deinterlacing, Decomb, Detelecine, Deblock, Grayscale, Cropping and Scaling Live Video Preview HandBrake 1.11.2 changelog: All platforms Video Fixed a crash that happened when doing a 2-pass lossless x265 encode Fixed a memory leak that happened when doing a 2-pass MPEG-4/MPEG-2/VP9/FFV1 encode Audio Updated the list of supported dithers and encoders combinations Fixed the Core Audio AAC encoder 7.1 channel layout Subtitles Fixed the VobSub palette creation in the MP4 container Build system Improved build system compatibility with older build tools Third-party libraries FFmpeg 8.0.2 (decoding and filters) SVT-AV1 4.1.0 (AV1 video encoding) Linux Added WebM MIME type to the list of the supported formats Mac Improved handling of unsupported presets Updated Sparkle automatic update library Windows Improved handling of unsupported presets Improved queue low space pause behaviour Fixed the automatic audio track name generation Fixed the summary description of HDR video Download: HandBrake 64-bit | Portable 64-bit | ~30.0 (Open Source) Download: HandBrake ARM64 | Portable Links: HandBrake Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • So, an article that has nothing to do with Windows 11, still gets Windows 11 in the title and a build number as the picture? Dell have a buggy build of Support Assist HP have UEFI settings that need unlocking for the secureboot cert upgrade to take place.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      243
    3. 3
      Steven P.
      72
    4. 4
      neufuse
      67
    5. 5
      ATLien_0
      67
  • Tell a friend

    Love Neowin? Tell a friend!