Recommended Posts

On 27/11/2021 at 14:26, Mindovermaster said:

I'll show you a full picture when I'm done setting this up, but for now..

 

image.png.9cda0a1a9a09f8c3e0857d3991524407.png

 

MinisForum EliteMini HX90 -barebone

-AMD Ryzen™ 9 5900HX, 8 Cores/16 Threads

2x WD Blue 1TB SSD

M.2 WD Black 1TB SSD

64GB (2x32GB) G-Skill Ripjaws 3200 So-DIMM DDR4

 

Some of you may say this is overkill, but I prefer the phrase "Go Big Or Go Home" Didn't want to go too much overboard.

what's your use case?

On 01/12/2021 at 18:09, ultimate99 said:

what's your use case?

I used to be a gamer, but don't do that anymore. So I don't need a bigarse GFX card.

 

I do a little video editing, but nothing heavy.

 

I run a lot of VM's, playing with different OS's. Reason I need the RAM.

On 01/12/2021 at 19:16, Mindovermaster said:

I run a lot of VM's, playing with different OS's. Reason I need the RAM.

I do the same, gotta have that ram.  Though, ran into a bottleneck on cpu, then switched to threadripper.

 

esxi7u3.thumb.jpg.f6a08d2f7b592f75ce44309fa02ecba7.jpg

 

Specs:

 

Case:  In-Win 925

Mobo:  Asus Rog Zenith II Extreme Alpha

Ram:  256 GB Corsair Vengeance

CPU:  Threadripper 3970x

Storage:  Samsung 970 EVO plus 2TB

Storage:  Sabrent 4TB Rocket x2

Storage:  Sabrent 2TB Rocket x2

PSU:  Corsair HX1200i

AIO cpu cooler:  Corsair H150i Elite Capellix

Fans:  Corsair QL120

Video: Titan XP.

 

Running ESXi 7 Update 3, with VCenter 7, using vmug advantage.

 

 

Yes, I know, my cable management is horrible, and I plan to fix it....

 

Currently using 83 GB ram, so yeah, ram is needed.

 

Need to enable TPM, I guess, to test encrypted drives and running windows 11, using vmware horizon....

 

Edited by theefool
Forgot Video
  • 3 weeks later...

And as you can see.  Yes!! I did go with an AIO.  In my defense, I couldn't pass up the price. Newegg just gave me to good of a deal.  So far, so good.   I'm also using,  be-quiet RGB fans on the radiator.  7 fans, 10 if you count the power supply and the two on the GPU.  The only in-take is on the front.  All the other fans blow all the hot air out.  The case came with an RGB controller. And be-quiet  came with a controller, but I didn't have to use it.

Edited by KruptedSeed
On 26/12/2021 at 00:08, KruptedSeed said:

My flash was on/ 

That would explain it. LOL

 

Hey AIO's are great! I don't use them anymore, but I used to earlier.

On 26/12/2021 at 00:25, Mindovermaster said:

That would explain it. LOL

 

Hey AIO's are great! I don't use them anymore, but I used to earlier.

I'm going to give it a try. I'm really loving my new build. I'm going to clean my old one up. an my brother said, " he what's it".  Waste not.  LOL!!!    If you look at the first pic I sent. And the one I just sent. You can see I improved on my cable management.

  • Like 1
  • 3 weeks later...

Just finished building this new PC. The colors I have in the box are very hard to capture on camera, but they're the below colors:

image.png.cb62811c58290f6e074a1a911c1a7dc8.png

 

PXL_20220112_020627499-sm.thumb.jpg.fa4259f8a4d575e9936248e4aedfc4b6.jpgPXL_20220112_020650093-sm.thumb.jpg.957dcb682b42dc4f456398c7b7a5884c.jpgPXL_20220112_020658091-sm.thumb.jpg.507c95c5980f2670fdd7531f49c20102.jpgPXL_20220112_020721557-sm.thumb.jpg.c578563a9f3d51e25e207ca30c9407f8.jpg

 

Specs:

  • NZXT H510 Flow Case
  • NZXT B550 N7 Motherboard
  • 2x Corsair LL fans 120mm (exhaust)
  • 2x Corsair LL fans 140mm (intake)
  • AMD Ryzen 5600X
  • Noctua NH-L9a-AM4 Chromax
  • 4x 8GB DDR4 Corsair Dominator Ram
  • 1TB M.2 NVMe 980 Pro SSD
  • Asus Dual RX 6600 GPU
  • Lian Li Strimmers (8-pin, 24-pin)
  • Corsair RM 850x PSU

 

On 11/01/2022 at 20:21, Emn1ty said:

Just finished building this new PC. The colors I have in the box are very hard to capture on camera, but they're the below colors:

Specs:

  • NZXT H510 Flow Case
  • NZXT B550 N7 Motherboard
  • 2x Corsair LL fans 120mm (exhaust)
  • 2x Corsair LL fans 140mm (intake)
  • AMD Ryzen 5600X
  • Noctua NH-L9a-AM4 Chromax
  • 4x 8GB DDR4 Corsair Dominator Ram
  • 1TB M.2 NVMe 980 Pro SSD
  • Asus Dual RX 6600 GPU
  • Lian Li Strimmers (8-pin, 24-pin)
  • Corsair RM 850x PSU

 

That looks awesome, man! Glad your happy :)

On 11/01/2022 at 18:21, Emn1ty said:

Just finished building this new PC. The colors I have in the box are very hard to capture on camera, but they're the below colors:

image.png.cb62811c58290f6e074a1a911c1a7dc8.png

 

PXL_20220112_020627499-sm.thumb.jpg.fa4259f8a4d575e9936248e4aedfc4b6.jpgPXL_20220112_020650093-sm.thumb.jpg.957dcb682b42dc4f456398c7b7a5884c.jpgPXL_20220112_020658091-sm.thumb.jpg.507c95c5980f2670fdd7531f49c20102.jpgPXL_20220112_020721557-sm.thumb.jpg.c578563a9f3d51e25e207ca30c9407f8.jpg

 

Specs:

  • NZXT H510 Flow Case
  • NZXT B550 N7 Motherboard
  • 2x Corsair LL fans 120mm (exhaust)
  • 2x Corsair LL fans 140mm (intake)
  • AMD Ryzen 5600X
  • Noctua NH-L9a-AM4 Chromax
  • 4x 8GB DDR4 Corsair Dominator Ram
  • 1TB M.2 NVMe 980 Pro SSD
  • Asus Dual RX 6600 GPU
  • Lian Li Strimmers (8-pin, 24-pin)
  • Corsair RM 850x PSU

 

An update, I swapped the GPU out for a nicer one. Considering I paid basically $0 for the parts due to some Christmas money I decided to go with a PowerColor Red Devil 6900XT Ultimate. It looks quite nice with the colors matching!

 

PXL_20220118_033625667.thumb.jpeg.18661ad9fb209a81958a5c625f7219e9.jpeg

  • 2 weeks later...
On 17/01/2022 at 22:45, Emn1ty said:

An update, I swapped the GPU out for a nicer one. Considering I paid basically $0 for the parts due to some Christmas money I decided to go with a PowerColor Red Devil 6900XT Ultimate. It looks quite nice with the colors matching!

 

PXL_20220118_033625667.thumb.jpeg.18661ad9fb209a81958a5c625f7219e9.jpeg

Bought your gpu at Micro Center?

  • 1 month later...

Some changes coming to the PC specs in the next week or so... trading out the PSU to a Corsair RM850W, and the EVGA RTX 2070 XC to an Asus ROG Strix 3070Ti.

Specs:

 

Case: Corsair 4000D
Mobo: Asus ROG Strix B550-A Gaming

CPU: AMD Ryzen R5 5600X

RAM: 32gb (4x8) 3200Mhz
AOI: Corsair H115i RGB Platinum

GPU: EVGA RTX 2070 XC
Storage: 2 x 1TB Samsung 980 Pro NVMe, 2 x 1TB Samsung 870 QVO
PSU: Corsair RM650x

Mouse: Logitech Pro X Superlight wireless

Keyboard: Logitech G213
Monitor: Gigabyte M34WQ 34" Ultrawide with built-in KVM for easy work > play

Speakers: Audioengine A2+

 

All fans swapped to Corsair LL120's for uniformity.

PXL_20211202_225458349.jpg

On 18/03/2022 at 18:28, DoctorD said:

R8 on the left and R10 on the right, scary part is I spent less than 500 on each

Not too shabby :) 

 

You buy them on sale, or are they second hand?

  • 3 weeks later...

Too poor to get a graphics card.

 

Specs:

Ryzen 5 4650G

A520 gigabyte mobo

2x8gb ddr4-3600 cl17

1x Kingston a2000 500gb,

1x crucial bx500 480gb

1x crucial mx500 1tb

 Lian li o11 dynamic mini

Lian li Galahad 240 cooler with sl120

Extra 3x antec prizm 120

Lian li sp750 PSU

 

Cable management is actually terrible (done in a rush)

But thankfully it's too dark to notice.

 

  • Like 2
  • Thanks 1
  • 3 weeks later...

I usually HAVE the Tower RGB disabled, too annoying and distracting since it's right next to monitor.

 

MOBO: MSI MPG z490 Gaming Plus
CPU: Intel Core i9-10900K
GPU: NVIDIA GeForce RTX 3070 8GB GDDR6 RGB
CPU Cooling: Dragon Liquid Cooler 240
Ram: Corsair Vengeance RGB Pro 32GB DDR4 3600
Case: MSI MPG SEKIRA 500X ARGB
Drives: 1TB M.2 NVMe SSD, 2TB Samsung 980 PRO Gen4 PCIe NVMe SSD, 7 x 1TB SSD, 2TB HDD

OS: Windows 11 Pro

Keyboard: Razer - Huntsman V2 Analog Wired Gaming Opto-Mechanical RGB
Mouse: Logitech G502 Hero RGB
Mousepad: Razer Goliathus Extended Chroma RGB
Headset: Logitech G PRO X Gaming Headset
Speakers: Razer Nommo Chroma RGB

Display: LG 34" 4k Ergo UltraWide QHD Monitor

 

IMG_5062.thumb.jpg.c987cd3161e75e36bdc079c810414f8e.jpg

 

 

On 26/04/2022 at 13:55, o0o said:

Keyboard: Razer - Huntsman V2 Analog Wired Gaming Opto-Mechanical RGB
Mouse: Logitech G502 Hero RGB

I have the same Mouse + Keyboard setup, but mine is the BlackWidow Elite (Orange).

  • 4 months later...

Hello,

An update to my system build from 2019.

A picture of the motherboard, with CPU (Arctic Silver 5 thermal paste applied) and first pair of DIMMs installed:

IMG_20220827_233048050_HDR_CROP.jpg.9ac3d774eb6ac20ae66f2057d9729cb8.jpg

Close-up on the thermal paste application, and one of the DIMMs:

IMG_20220827_233036171_CROP.thumb.jpg.d61597fdc60ce7e6c185f668c3b7b756.jpg
 

With the heat sink installed:

IMG_20220828_001739290_HDR_CROP.jpg.41075f02624b1354b3aa7266056e0b6a.jpg

 

And preliminarily installed in the case to check fit and make sure there weren't any issues with clearances, overheating and so forth:

 

IMG_20220831_040356898_CROP.thumb.jpg.78c02ab5b9eb8b2febd06a37cd996df7.jpg


I subsequently re-routed some of the cables and the video card support.

Case:  Fractal Design R6 with USB-C
CPUIntel® Xeon® W-2195 Processor (24.75M Cache, 2.30 GHz)
GPUASUS TUF Gaming GeForce RTX™ 3080 OC Edition 12GB GDDR6X (LHR)
HDD: 3 × 10 TB WD Red, 1 × 18TB WD Red Pro
Heat Sink: Noctua NH-D15 chromax.black
MotherboardASUS WS C422 SAGE/10G
RAM:  4 × SK hynix 64GB PC4-21300 2666Mhz 4Rx4 ECC LR-DIMMs (P/N: HMAA8GL7CPR4N-VK)
SSD: 1 × 1TB Samsung 980 PRO NVMe SSD with heat sink, 1 × 2TB Samsung 980 PRO NVMe SSD, 1 × OWC Accelsior 8M2 (populated with 8 × 2TB Intel 660p NVMe SSD)
PSU:  EVGA SuperNOVA 1000W
Thermal Paste:  Arctic Silver 5

There is a full build/parts list at https://pcpartpicker.com/b/BXPV3C.

 

Regards,

Aryeh Goretsky
 

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Wow, that could have been dangerous, certainly not ready for these things. They have to be 100% or pretty well close to it. Not that I will see one i doubt, never mind ride in one, they may have them in London, but I doubt they will come to where I live.
    • Nothing kills CMF Phone 2 Pro's successor due to rising memory prices by Hamid Ganji Storage and RAM prices have been rising over the past year, leading to a significant increase in the cost of electronics for customers around the world. Many companies are now revising their plans for upcoming devices due to higher component costs and overall production expenses. CMF is the latest company to cancel the successor to one of its best-selling phones due to rising memory prices. CMF is a sub-brand of Nothing and focuses on making budget smartphones for growing markets. The brand launched the CMF Phone 2 Pro last year with some eye-catching specifications and an affordable price. While many customers may have been waiting for a successor this year, one of the company’s executives has announced that CMF will not release a new smartphone this year. And AI is to blame. As Nothing co-founder Akis Evangelidis announced on X, the company has been working on a successor to the CMF Phone 2 Pro, but with current memory prices, it cannot “build a phone that feels like a genuine step forward at a price that makes sense for CMF.” So, no new CMF phone will be launched this year. Meanwhile, Evangelidis said the company still has several new products in the pipeline, including some in entirely new categories. He added that the Nothing brand will also continue launching new products through 2026. Budget smartphones are among the first victims of the surge in RAM and memory prices, as they have become more expensive to build. The sharp increase in memory costs could also reshape the traditional price ranges associated with budget phones. Apple CEO Tim Cook also recently said that price increases for some of the company’s products are unavoidable because RAM and memory have become significantly more expensive this year. Analysts estimate that the base price of the upcoming iPhone 18 Pro could rise to $1,399 due to current market shortages.
    • Nudge me when they bring back hardware audio acceleration so I can get my EAX 5 back. We've evolved graphics to real-time path tracing, but regressed audio some 15 years back in time with this stupid software audio stack.
    • Ocenaudio 3.19.4 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.4 changelog: Adds fallback fonts so every language and symbol displays correctly Improves autosave and session recovery stability Improves region navigation and display Fixes a crash when the level meter is used on displays with a scaling greater than 200% Fixes memory corruption when using the silence selection tools Fixes crashes when closing a file while effects are still being processed Fixes a freeze when applying effects to many files at once (macOS) Fixes crashes related to audio devices on Windows Fixes invalid file names when exporting regions whose label is used as the file name Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hasleo Disk Clone 5.8.2.1 by Razvan Serea Hasleo Disk Clone is a free and all-in-one disk cloning software for Windows 11/10/8/7/Vista and Windows Server that can help you migrate Windows OS to another disk, clone one disk to another disk or clone one partition to another location quickly and efficiently. Completely Free Windows Migration and Disk/Partition Cloning Software Migrate Windows from one disk to another without reinstalling Windows, apps. Clone one disk to another and makes the data on 2 disks are exactly the same. Clone a partition to another location without losing any data. Easily adjust the size and location of the destination partition. Convert MBR to GPT or convert GPT to MBR by cloning. Creation of Windows PE emergency disk. Extremely fast cloning speed and multi-language support. Supported OS: Windows Vista/Server 2008 or later, fully compatible with GPT and UEFI. Hasleo Disk Clone 5.8.2.1 changelog: Fixed an issue that caused disk enumeration to fail Fixed an issue where WinPE created under Windows ARM64 26H1 did not work properly Download: Hasleo Disk Clone 5.8.2.1 | 32.3 MB (Freeware) Link: Hasleo Disk Clone Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      545
    2. 2
      +Edouard
      187
    3. 3
      Michael Scrip
      78
    4. 4
      PsYcHoKiLLa
      75
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!