Covid: Is your job essential?


COVID: Is your job essential?  

72 members have voted

  1. 1. Is your job essential?

    • Yes
      47
    • No
      19


Recommended Posts

Just curious on whose job is deemed essential or not.  Currently most of my family are still working with some getting pay cuts/less hours.   A few out of work.

 

My job, we have Navy contracts.  We also provide backup power systems for hospitals and nuclear power plants.  So I am still working every day and going in to the office.  I can also work from home.

 

My GF is also a PA and she is seeing patients daily with COVID.  So I have some concern for her.

 

If you are still working, put yes.  If you are not working because of COVID, then No.

Edited by techbeck
Link to comment
https://www.neowin.net/forum/topic/1394155-covid-is-your-job-essential/
Share on other sites

My employer supplies safety and automation solutions for government, nuclear, aerospace, and pretty much all manufacturing companies in the US, so we're still open.  Besides a slight dip in sales, I've been completely unaffected luckily.

My job is essential to the firm.  My firm is involved in major contracts globally.  Some of those contracts are with the NHS.  Business is currently up (by quite a margin) for us.

 

Is my job essential to the world continuing?  Not at all.

 

I'm currently working from home, but working as per normal.

 

I've no idea how to answer - lol

I work in a call center that troubleshoots credit card machines so we're deemed essential

 

I'm not even on the phones lol. I write/maintain the website for our troubleshooting references the agents use.

I'm still going into work every day because they have me also helping get everyone setup for BCP in case the agents need to work from home.

I marked "yes" according to the original post, but I wouldn't consider it essential. I work in IT Support. The Forum have said that if you can work from home then you should. Except for our team, where we need to have one person in the office each day. I was in on Tuesday, but aside from that we're working from home. Well, I was until about 4 hours ago. Now I'm on holiday for a week.

I dunno, kinda.

 

I support engineers who fix boilers for a large boiler manufacturer, so it's keeping hot water and heating going.

 

Did I need to spend two weeks in an office/call centre environment? Not really, especially now, seeing as they let us work at home in the end.

 

This was never the plan, one day they had a meeting to say that there is zero chance that we can work at home and to quash any questioning of it. The next day they did a 180, it was really weird.

3 minutes ago, Nick H. said:

I marked "yes" according to the original post, but I wouldn't consider it essential. I work in IT Support. The Forum have said that if you can work from home then you should. Except for our team, where we need to have one person in the office each day. I was in on Tuesday, but aside from that we're working from home. Well, I was until about 4 hours ago. Now I'm on holiday for a week.

Nick H. - part of the problem is that there was a LOT of resistance to letting folks WFH in the government (despite the government being set up for it for years) and it came from up the chain; it's as if they are "counting bodies".  I'm really wondering - was someone LITERALLY "counting bodies supervised" - and that is what drove the resistance to working from home?  The same is true in telecom (even cable companies).  Yes; I'm serious - the entirety of the cable company support network can work from home - and has been able to since 1988 using existing technologies.  The question is where is the resistance coming from - and WHY is it coming from there?

1 minute ago, PGHammer said:

Nick H. - part of the problem is that there was a LOT of resistance to letting folks WFH in the government (despite the government being set up for it for years) and it came from up the chain; it's as if they are "counting bodies".  I'm really wondering - was someone LITERALLY "counting bodies supervised" - and that is what drove the resistance to working from home?  The same is true in telecom (even cable companies).  Yes; I'm serious - the entirety of the cable company support network can work from home - and has been able to since 1988 using existing technologies.  The question is where is the resistance coming from - and WHY is it coming from there?

I would not like to host a 750+ people video conference using 1988 technology...

I'm retired so I voted for my wife and said yes, although I don't have a clue why her job is essential! It wasn't a week ago when she got laid off but went back to work this week. As of now, I don't know how long she will be back to work, but with the hours she's working this week and Saturday, doubt if it's just for 1 week. I think she'll have to go through the health questionnaire and getting a new permission to drive slip.

 

She works for a company making office furniture.

12 minutes ago, kalkal said:

I dunno, kinda.

 

I support engineers who fix boilers for a large boiler manufacturer, so it's keeping hot water and heating going.

 

Did I need to spend two weeks in an office/call centre environment? Not really, especially now, seeing as they let us work at home in the end.

 

This was never the plan, one day they had a meeting to say that there is zero chance that we can work at home and to quash any questioning of it. The next day they did a 180, it was really weird.

Of course they can - The folks doing the actual repairs can park the trucks at home; heck the DISPATCHERS can dispatch from home as well - existing technology (it has been available for over ten years - if not twenty)! Again - what's driving the resistance?  Something smells - and it's not the cologne.

2 minutes ago, Nick H. said:

I would not like to host a 750+ people video conference using 1988 technology...

You don't have to use 1988 tech - tech has advanced since them - you can do it using Teams - or Skype - or even Facebook Messenger (the latter costs nothing - and likely is already in the houses of the folks doing the work).

1 minute ago, PGHammer said:

Of course they can - The folks doing the actual repairs can park the trucks can home; heck the DISPATCHERS can dispatch from home as well - existing technology (it has been available for over ten years - if not twenty)! Again - what's driving the resistance?  Something smells - and it's not the cologne.

I'm not following, the engineers pretty much have the short straw in that they physically have to repair boilers at people's homes. I on the other hand was on the end of the phone for the engineers, and now doing that at home thank god! Feel bad for them, however I've no doubt that if they had the option, that they would be working from home instead of working out in the field.

1 minute ago, kalkal said:

I'm not following, the engineers pretty much have the short straw in that they physically have to repair boilers at people's homes. I on the other hand was on the end of the phone for the engineers, and now doing that at home thank god! Feel bad for them, however I've no doubt that if they had the option, that they would be working from home instead of working out in the field.

Again - do they have Facebook Mesenger or Skype?  You can dispatch from your house - using either.

3 minutes ago, PGHammer said:

Again - do they have Facebook Mesenger or Skype?  You can dispatch from your house - using either.

Dispatch what?

 

We're talking about Gas Safe engineers on Gas appliances, you need to be Gas Safe trained to work on any Gas appliance, for fairly obvious reasons...

7 minutes ago, cork1958 said:

I'm retired so I voted for my wife and said yes, although I don't have a clue why her job is essential! It wasn't a week ago when she got laid off but went back to work this week. As of now, I don't know how long she will be back to work, but with the hours she's working this week and Saturday, doubt if it's just for 1 week. I think she'll have to go through the health questionnaire and getting a new permission to drive slip.

 

She works for a company making office furniture.

it still can be done to an extent from home.  Furnitureland South literally has their entire staff WFH - and they make mid-end to high-end furniture for half the United States.  Our own rep is WFH - her office is in Greensboro - however, her home is not.  WE are located in Maryland,  It's why I asked what is driving the resistance.

2 minutes ago, kalkal said:

Dispatch what?

 

We're talking about Gas Safe engineers on Gas appliances, you need to be Gas Safe trained to work on any Gas appliance, for fairly obvious reasons...

I'm talking about sending out the repair folks.  Can you or can you not you not send out repair folks via Skype or Facebook Messenger?

6 minutes ago, PGHammer said:

I'm talking about sending out the repair folks.  Can you or can you not you not send out repair folks via Skype or Facebook Messenger?

Oh we're nationwide, sure, we're not exactly small and we have full background telephony set up, and all we needed was a VPN to work from home the exact way we worked in the office.

 

The crux was "We don't have the support structure" in place to make it feasible. Well, we're working at home now at the very least, not sure why they were so against this, old habits I guess.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Funny, but I didn't had the issue. All PC's at work are Dell and we had the culprit version of Support Assist for about 2 weeks until we got the new one. No problem at all. And for checking you can also use Dell Command Update, no need to search in windows settings. Just check the Upgrade History.
    • YES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    • Apple are scared of their customers! They have built a brand over the years of "it just works out of the box", but that slows innovation. Samsung's master stroke was the Galaxy Ultra: "Let's cram everything into one handset, make it so stupid only real nerds will love it, some of the features will work, some won't, but the audience will have such a high tolerance they won't care". Apple has no such device and so they are constantly worrying these days about the fallout of creating a new experience that customers might not like. I know it is often cited the reason they don't build a touchscreen Mac Book is they don't want to cannibalise the the iPad market, but I think it's equally cold feet after the criticism Microsoft receive trying to make a touch compatible desktop OS
    • HandBrake 1.11.2 by Razvan Serea HandBrake is an open-source, GPL-licensed, multiplatform, multithreaded video transcoder, available for MacOS X, Linux and Windows. Handbrake can process most common multimedia files and any DVD or BluRay sources that do not contain any kind of copy protection. Here is a detailed breakdown of HandBrake’s features: Built-in Device Presets—Get started with HandBrake in seconds by choosing a profile optimized for your device, or choose a universal profile for standard or high quality conversions. Simple, easy, fast. For those that want more choice, tweak many basic and advanced options to improve your encodes. Supported Input Sources—Handbrake can process most common multimedia files and any DVD or Blu-ray sources that do not contain any kind of copy protection. Outputs: File Containers: .MP4(.M4V) and .MKV Video Encoders: H.265 (x265 and QuickSync), H.264(x264 and QuickSync), H.265 MPEG-4 and MPEG-2, VP8 and Theora Audio Encoders: AAC / HE-AAC, MP3, Flac, AC3, or Vorbis Audio Pass-thru: AC-3, E-AC3, DTS, DTS-HD, TrueHD, AAC and MP3 tracks Additional features: Title/ Chapter Selection Queue up Multiple Encodes Chapter Markers Subtitles (VobSub, Closed Captions CEA-608, SSA, SRT) Constant Quality or Average BitRate Video Encoding Support for VFR, CFR and VFR Video Filters—Deinterlacing, Decomb, Detelecine, Deblock, Grayscale, Cropping and Scaling Live Video Preview HandBrake 1.11.2 changelog: All platforms Video Fixed a crash that happened when doing a 2-pass lossless x265 encode Fixed a memory leak that happened when doing a 2-pass MPEG-4/MPEG-2/VP9/FFV1 encode Audio Updated the list of supported dithers and encoders combinations Fixed the Core Audio AAC encoder 7.1 channel layout Subtitles Fixed the VobSub palette creation in the MP4 container Build system Improved build system compatibility with older build tools Third-party libraries FFmpeg 8.0.2 (decoding and filters) SVT-AV1 4.1.0 (AV1 video encoding) Linux Added WebM MIME type to the list of the supported formats Mac Improved handling of unsupported presets Updated Sparkle automatic update library Windows Improved handling of unsupported presets Improved queue low space pause behaviour Fixed the automatic audio track name generation Fixed the summary description of HDR video Download: HandBrake 64-bit | Portable 64-bit | ~30.0 (Open Source) Download: HandBrake ARM64 | Portable Links: HandBrake Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • So, an article that has nothing to do with Windows 11, still gets Windows 11 in the title and a build number as the picture? Dell have a buggy build of Support Assist HP have UEFI settings that need unlocking for the secureboot cert upgrade to take place.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      243
    3. 3
      Steven P.
      72
    4. 4
      neufuse
      67
    5. 5
      ATLien_0
      67
  • Tell a friend

    Love Neowin? Tell a friend!