Intel Processor Rating Details


Recommended Posts

Intel Processor Rating Details

Don?t Confuse Pentium 4 with a BMW

by Anna Filatova

03/19/2004 | 05:22 AM

Not so long ago we talked about Intel?s plans concerning the introduction of the processor rating. Intel has finally realized the necessity to offer a new metrics for its CPUs marking, because the core clock frequency doesn?t give a clear idea of the processor performance any more. In fact, this tendency has existed for quite a while now. Today Intel offers a few different desktop and notebook processor families: Pentium 4 Extreme Edition, Pentium 4, Pentium M and Celeron. And if you can tell the CPU performance from its working core frequency within a single family, then comparing processors from different families makes absolutely no sense. Intel?s marketing team, however, faces the following problems more and more often: it is really hard to explain to an unsophisticated user why a notebook based on Pentium M 1.6GHz is more preferable than a notebook based on Mobile Pentium 4 2.4GHz. Moreover, there are ?tricky things? even within a single family sometimes. For example, there are a few Pentium 4 2.4GHz modifications in the today?s market, which differ from one another by the bus frequency and L2 cache size, which surely affects their performance. So, introducing a unified rating is quite a logical move in this case.

We have also mentioned in our news the major principles that the new Intel rating would be based on. Intel?s rating system is going to be very similar to Opteron marking system. Or even to BMW classification, because there will be three series:

* High End - 7XX;

* Middle End - 5XX;

* Low End - 3XX.

The rating system implies that you should be able to move easily from the youngest to the top model within a processor family with a certain discrete step. For instance, Dothan and Prescott processors will differ from the next models by an increment divisible by 10. Celeron processors will be rated with a smaller increment divisible by 5, because the difference in their performance and clock frequency is smaller.

The size of this increment will be determined by the cache size as well as the processor bus frequency. For instance, if Dothan 1.6GHz with 400MHz bus is rated as 725 then a similar model with 533MHz bus will be rated as 730 even if its working frequency is the same.

They haven?t yet thought of a rating system for Pentium 4 XE processors, but they will surely belong to the most expensive and powerful ?7xx? series.

By the way, the use of this rating system is a part of Intel?s preparations for the launch of the new Merom processors and its desktop analogue, which is now known as Conroe. Intel starts moving away from the tradition to increase the clock frequency starting with Tejas announcement. The cache of the new CPUs is known to be increased to 2MB, and the bus frequency will rise to 1066MHz. Of course, they will have to add a few extra rating options in order to distinguish these CPUs from other Prescott based ones. In this case you will definitely get a better impression of Tejas? performance even if it works at the same frequency as Prescott.

The rating system from Intel will be introduced in May, when Intel announced new mobile Dothan CPUs with 2MB L2 cache and 90nm manufacturing technology.

http://www.xbitlabs.com/news/cpu/display/20040319050055.html

Link to comment
https://www.neowin.net/forum/topic/150063-intel-processor-rating-details/
Share on other sites

um yeah...that looks confussing...more confussing that say....AMD's rating system

and Intel was the one who Bitched that AMD's was the misleading one....but looking at the Intel one clearlly shows they have no clue....or that they want to confuse the populous...

Definately time to get a Pentium M Motherboard. If this is how Intel is going.. :/

Indeed. They are moving away from high clock speeds and concentrating on multi-core processors based on the Pentium M architecture. This is obvious when you look at the processor roadmap. The Merom/Conroe looks damn good.

The Merom/Conroe looks damn good.

i second that.... honestly those will be insteresting times.

as for their ratings, i dont find it to confusing but i wouldnt have just distinguished the "rating" by bus and cache size.... still a little misleading....

but if they are factoring the overall performance.. then good for them

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I am one of the first people to use the DXVK technology. In the channel below you can see some videos that I have made using this technology, including Assassin's Creed Odyssey. https://www.youtube.com/@nahum7995/videos Assassin's Creed Odyssey experienced several bugs and technical issues during its first months after release. It launched with its own fair share of funny but frustrating glitches. I ran it on DXVK 9 days after its release and I played it for many hours but didn't see a single significant bug on Linux. Assassin's Creed Odyssey is widely celebrated for pushing the franchise in bold new directions and specifically for nailing several elements better than any other title in the AC series: Player Choice & Branching Narrative, The Mercenary & Cultist System, Mythological Integration, Overpowered Combat Abilities, Open World Exploration But what I'm trying to point out is that this game wasn't quite playable on most windows systems, until a few months after its release when most of the bugs were fixed. However, on Linux it ran completely flawless from day one, although DXVK had seen little development and refinement at the time. What do you think the situation will be in 2026 now that most bugs and glitches of DXVK have been completely eliminated? This is information from Google about these situations that I am quoting. In many cases, using DXVK (a translation layer that converts DirectX 9, 10, or 11 into Vulkan) can result in more stable frame times and higher performance than native Windows rendering. This happens primarily by bypassing driver overhead and multithreading draw calls that were previously restricted to a single CPU core. Older APIs (like DirectX 9 and 11) are largely single-threaded on the CPU side. DXVK translates these calls to Vulkan, which is highly multi-threaded. This reduces CPU-bound stuttering on weaker processors. In certain cases, GPU manufacturers (especially AMD) have significantly better and more modern Vulkan drivers than they do for legacy DirectX. Vulkan gives developers—and in this case, the translation layer—closer control over how resources are held in VRAM. This can prevent micro-stutters and sudden frame drops during chaotic gameplay. Yes, certain games, particularly older DirectX 9 to 11 titles, can run with fewer crashes on DXVK than on native Windows. By intercepting DirectX draw calls and translating them into the modern, highly efficient Vulkan API, DXVK bypasses the limitations and poor driver support that cause instability in aging game engines. PlayStation 1, PlayStation 2 and PlayStation 3 can be easily and perfectly emulated on Linux. In fact, modern Linux emulators offer high-performance upscaling, widescreen patches, and automatic controller mapping out of the box.                                                                                                                                                                                                                                                                                                                                 PlayStation 1/2/3 games look drastically better on Linux thanks to resolution upscaling. Furthermore, it is also a fact that you cannot play many fun games on Windows either, isn't it? - The Nintendo Switch has an extensive library of exclusive games. - PlayStation has an extensive library of exclusive games - Android has "mobile-exclusive" games, meaning they are exclusive to mobile devices (iOS and Android) and aren't available on PC or consoles. And finally, it is also the case that in the next five years there will be games that millions of people will say you absolutely must play and that they want to play this specific game that released a few days ago. However, the other side of this story is that currently, absolutely no one cares that they cannot play these upcoming games right now.
    • Flameshot 14.0 RC3 by Razvan Serea Flameshot is a free and open-source, cross-platform tool to take screenshots with many built-in features to save you time. Using Flameshot is as simple as launching, dragging the selection box to cover the area you want to capture, making annotations as needed in on-screen and saving the shot to your computer, all with a very simple and straightforward interface. Flameshot allows users to simply upload their screenshots directly to the cloud in order to easily share it with others. You can upload your image directly to Imgur with a single click and share the URL with others. In-app screenshot editing - You can choose to add an arrow mark, highlight text, blur a section (blur or pixelate an area), add a text, draw something, add a rectangular/circular shaped border, add an incrementing counter number, and add a solid color box with Flameshot's built-in editing tools. Command-line interface (CLI) - Flameshot has several commands you can use in the terminal without launching the GUI via a command line interface. The command line interface lets you script Flameshot and use it as the subject of key binds. Flameshot 14.0 RC3 changelog: Translations update from Hosted Weblate by @weblate in #4612 Translations update from Hosted Weblate by @weblate in #4619 Fix pin position on Windows for scaled screen by @ElTh0r0 in #4614 Cmake Analyzers by @ElTh0r0 in #4613 Translations update from Hosted Weblate by @weblate in #4632 fix(macos): prevent config tab content from rendering behind tab bar by @Mitnitsky in #4627 fix(macos): use CGRequestScreenCaptureAccess instead of grabWindow for permission request by @Mitnitsky in #4617 Fix KDE Plasma keyboard shortcut config file by @ElTh0r0 in #4637 fix(macos): fix clipboard copy failing from tray and GUI by @Mitnitsky in #4629 feature(macos): show dock icon when config window is open by @Mitnitsky in #4628 Option to disable tray icon on Windows by @ElTh0r0 in #4634 Translations update from Hosted Weblate by @weblate in #4642 fix(macos): make fullscreen capture overlay configurable by @Mitnitsky in #4622 Update GH actions using Node.js 24 by @ElTh0r0 in #4660 fix issue with screen selection in non interactive mode by @borgmanJeremy in #4667 Uniformize both spec files + ninja build openSUSE by @QuentiumYT in #4658 screengrabber: pass non-empty parent_window to xdg-desktop-portal by @artefaktor93 in #4664 Allow multiple flameshot GUI instances (fix for #3177) by @ElTh0r0 in #4680 Unify Linux ARM CI into Linux CI (also drop QEMU) by @theofficialgman in #4702 respect system proxy settings by @borgmanJeremy in #4674 Replace ifdef LINUX with UNIX to include BSD systems by @ElTh0r0 in #4700 Download: Flameshot 14.0 RC3 | 18.1 MB (Open Source) Download: Flameshot Portable | 53.0 MB Links: Flameshot Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I found that stability back then was really down to the motherboard manufacturer. Back then i stuck with Microstar motherboards and VIA chipsets as they were ultra reliable. Most stuff was done with jumpers and left little room for user created problems 👍
  • Recent Achievements

    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
    • One Year In
      MadMung0 earned a badge
      One Year In
    • Week One Done
      jefred earned a badge
      Week One Done
    • Apprentice
      JoeyNeo went up a rank
      Apprentice
  • Popular Contributors

    1. 1
      +primortal
      490
    2. 2
      PsYcHoKiLLa
      232
    3. 3
      Skyfrog
      78
    4. 4
      FloatingFatMan
      68
    5. 5
      Michael Scrip
      58
  • Tell a friend

    Love Neowin? Tell a friend!