• 0

Running Mac OS X on x86 PC!

Asked by S.MULLA,

 Share

Question

3213 answers to this question

Recommended Posts

  • 0
Experienced

muzzle79

Posted
Posted

Well so far i've had very little trouble. No crashes yet at all today. Installed on two systems to see what difference would be like.

Both are 3ghz with xp profesional. One however has 1 gb with 512 dedicated to os install, while the other has 2gb with 1gb dedicated to os install. The increase in memory increased productivity around 20-30 % from what i can tell. Set redraw rate at 120 and so far so good. Doesn't take nearly as long to install stuff on the unit with 1 gig ram. *tried a copy of MS OFFICE students and teachers edition*.

mac.jpg

  • 0
Mentor

AquaFX

Posted
Posted
It feels like a P200-300 running XP with all it's effects on, so it's sluggish, but not unbearable. And no it doesn't take 3 seconds for the cursor to move, it's instant for me, I've allocated 512mb for PearPC as well. I've installed a few themes, installed Windowshade X and just installed iTunes 4.5:

http://homepage.ntlworld.com/sherry.ponting/Junk/PearPC3.jpg

how would i allocate that much ram, just by changing the config file?

  • 0
Grand Master

uniacid

Posted
Posted (edited)
i changed the memory config to memory_size=0x20000000, but it shows 128 at boot still anyone know why?  will the boot say that but when its installed and done will it be fine?

make sure you don't have # next to that line since that comments it out

also I'm trying out the Trunk (0.2pre) build, seems ok can't really see a big speed difference

Edited by uniacid
  • 0
Rookie

nmbr6

Posted
Posted

Maybe someone can help me. I keep getting an error when trying to run the config file. I have a athlon64 3200+, 1gb pc4000, 2 raptors striped (not sure if this is my problem)

Here is my error

ppccfg.darwin: I/O error: No such file or directory

usage: ppc configfile

Here is my configfile
# PearPC Configuration File

#

# Resolution

#

# 0: 640x480x8 (indexed)

# 1: 640x480x15

# 2: 640x480x32

# 3: 800x600x8 (indexed)

# 4: 800x600x15

# 5: 800x600x32

# 6: 1024x768x8 (indexed)

# 7: 1024x768x15

# 8: 1024x768x32

#

# The indexed modes are unsupported.

#

# default: 4

ppc_start_resolution = 4

#

# Redraw interval (in ms)

# must be between 1 and 999

#

# If you set this higher, PearPC will spend less time doing redraws (and so run faster)

# but feel less responsive. You should adjust this to your computer speed and personal

# preference.

#

redraw_interval_msec = 200

#

# Loader

#

#

# Boot method

#  this can be

#  1. "auto", prom will boot the first bootable partition found (default)

#  2. "select", prom will show you a list of bootable partitions

#  3. "force", prom will load and boot the local file prom_loadfile

#

prom_bootmethod = "auto"

# Example of how to use "force":

#prom_bootmethod = "force"

#prom_loadfile = "test/yaboot"

#prom_env_bootpath = "disk"

#

# bootargs: don't change unless you know what you are doing

# machargs: set to "-v" to get a verbose startup

#

#prom_env_bootargs = ""

prom_env_machargs = "-v"

#

# This is needed if you want to boot Mac OS X

#

prom_driver_graphic = "video.x"

# This will adjust the position of the initial page table (don't change)

#page_table_pa = 104857600

#

# CPU Config

#

# Processor Version Register

# Defaults to 0x00088302

# Only change if you know want you are doing

#

#cpu_pvr = 0x00088302

#

# Main memory (default 128 MiB)

# must be >= 64 MiB

#

#memory_size=0x8000000

#

# IO Devices

#

#

# PCI IDE Config

#

# Drive type will be set according to file extension:

#  .img: Harddisk (filesize must be multiple of 516096)

#  .iso: CD-Rom

# Or you can override this by specifying the type via

# pci_ide0_master_type / pci_ide0_slave_type

pci_ide0_master_installed = 1

pci_ide0_master_image = "osx.img"

#pci_ide0_master_type = "hd"

pci_ide0_slave_installed = 1

pci_ide0_slave_image = "darwin-701.iso"

#pci_ide0_slave_image = "osx.iso"

#pci_ide0_slave_image = "/dev/cdrom"

pci_ide0_slave_type = "cdrom"

#

# Network (unavailable on windows)

#

pci_3c90x_installed = 0

pci_3c90x_mac = "de:ad:ca:fe:12:34"

#

# USB

#

pci_usb_installed = 1

#

# NVRAM

#

nvram_file = "nvram"

Any ideas?

  • 0
Explorer

jedavis1

Posted
Posted
anyone can run Chess?

i did try the nero and put the .dmg inside, but it got error, something it cant mount it - and following by some number

nmbr6: you need run in on a command prompt, in the directory, type ppc configfile

eg. ppc ppccfg.example

mitodna

I have had luck loosing to the emulated OS X chess!

Chess on OS X.2

This topic is now closed to further replies.
 Share
Go to question listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Microsoft released new Defender update for Windows 11, 10, Server ISO installations

      By hellowalkman · Posted

      Microsoft released new Defender update for Windows 11, 10, Server ISO installations by Sayan Sen Microsoft releases new Windows Defender update packages very frequently to protect against various newly discovered malware. Once a while every three months or so, the company also pushes out these updates to Windows images (WIM and VHD) and ISOs, that are used to install Windows. Hence with the newest Windows 11 update available via the official MCT tool, you should get these definitions. This update package is necessary as a Windows installation image may contain old, outdated anti-malware definitions and software binaries. Aside from better security, these updates can also provide improved performance benefits in some cases. When a new Windows installation is set up, there may be a temporary security risk due to outdated Microsoft Defender protection in the OS installation images. This happens because the antimalware software included in these images might not be up to date. Thus Microsoft says that these updated definitions essentially help close this protection gap. Microsoft delivered the latest security definitions for Windows images via security intelligence update version 1.445.323.0. The Defender package version is also the same. It applies to Windows 11, Windows 10 ESU, Windows 10 Enterprise LTSC 2021, Win 10 Ent LTSC 2019, Win 10 Ent LTSB 2016, Windows Server 2022, Windows Server 2019, and Windows Server 2016. Microsoft writes: "This package updates the anti-malware client, anti-malware engine, and signature versions in the OS installation images to following versions: Platform version: 4.18.26040.7 Engine version: 1.1.26040.8 Security intelligence version: 1.447.236.0" From Microsoft's security bulletin, we learn that the security intelligence update version 1.447.236.0 was released early last month and adds threat detections for various malware like trojan, backdoor exploits, ransomware, stealers, AutoKMS, and more. For those wondering, the latest intelligence update is version 1.451.297.0 at the time of writing.
    • Hi my name is Olivia and I am from Australia

      By mkol · Posted

      Hello, Hope all is well. I am in UK.  
    • Microsoft is making Windows 11's context menus faster, simpler, and configurable

      By wotsit · Posted

      This! 👆🏻
    • 007 First Light review: Satisfying spy adventure that James Bond needed

      By Nick H. · Posted

      I'm not happy with myself for it, but I've gone and got hold of it. Just another 45 minutes and I'll be Bond, James Bond. In my defence, IO's Hitman series is awesome, and I'm a sucker for 007. So while it might seem a bit simplified compared to Hitman, I'm sure I'll be right at home.
    • Unofficial script lets you install unreleased Windows 11 features without Microsoft Account

      By ryansurfer98 · Posted

      Or just check the script yourself ^^. I hate having a Microsoft account tied to my windows install.

  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      271
    3. 3
      +Edouard
      75
    4. 4
      Skyfrog
      74
    5. 5
      Steven P.
      71
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!