• 0

Running Mac OS X on x86 PC!

Asked by S.MULLA,

 Share

Question

3213 answers to this question

Recommended Posts

  • 0
Explorer

jedavis1

Posted
Posted

I think I have found a way (at least it works for me) to change CDs without rebooting:

Drag the CD to the eject arrow.

Let go the mouse button.

immediately hit F12.

Immediately click the "Change CD" button

It should pop up a dialog box that allows you to select a different ISO or even IMG file (although the IMG file is seen as a CD)

It works for me, but it requires a little playing with the timing.

Let me know if anyone else has luck with this, or if I am missing an easier way of doing this.

Thanks,

Jon

  • 0
Grand Master

Chicane-UK Veteran

Posted
  • Veteran
Posted (edited)

Oh great.. so been chugging away for ages at this only to find that MagicISO (and probably Windows) can't interpret a MacOS X install CD!!

Nero will make an image of the CD in its NRG format, but then when I try and convert it from an NRG to an ISO with MagicISO, it reckons the image is blank!! :|

*edit*

Ahhh.. matters not.. off we go :)

installing.jpg

:D

Edited by Chicane-UK
  • 0
Rising Star

phalanx126

Posted
Posted

ok, i've done everything in the tutorials but it still won't work for me, so i must be doing something wrong...

:crazy:

- i have the 6GB disk image in my pearpc directory

- i have unzipped the win32-jitc version in my pearpc directory

- i've made a config file for my system, named "ppc_configfile", and it looks like this:

#PearPC configuration file

#Screen Resolution ID

#Current = 800*600*15

ppc_start_resolution=-1

#Redraw Interval in ms (1-999)

redraw_interval_msec=200

#Boot Mode : auto, select or force

#(force is not implemented in Config GUI yet)

prom_bootmethod="select"

#Boot Method : "-v" = verbose

#"-s" = single-user mode (usefull to format Mac OS X drive from Darwin)

prom_env_machargs="-s"

#This is needed if you want to boot Mac OS X

prom_driver_graphic="video.x"

#CPU config : defaults to 0x00088302

#cpu_pvr = 0x00088302

#Memory Size (default 128 MiB, must be >= 64 MiB)

memory_size=0x8000000

#IO Devices

#Master Device

pci_ide0_master_installed=1

pci_ide0_master_image="C:\pearpc\macosx_6gb_unjournaled.img"

pci_ide0_master_type="hd"

#Slave Device

pci_ide0_slave_installed=1

pci_ide0_slave_image="F:\Mac OSX 10.3 CD 1.iso"

pci_ide0_slave_type="cdrom"

#Network (unavailable on Windows)

pci_3c90x_installed=0

pci_3c90x_mac="de:ad:ca:fe:12:34"

#USB Device

pci_usb_installed=1

#NVRAM

nvram_file="nvram"

i've followed all the steps and yet it still won't work, for the love of God, someone freakin' enlighten me PLEASE!!!

everytime i double click on ppc.exe, it says usage: ppc configfile, and i don't have any clue what that means. should i be running my config file from the run window? if so, how do i do this? i'm not trying to be annoying, i just want a little help. thanks

  • 0
Explorer

jedavis1

Posted
Posted
ok, i've done everything in the tutorials but it still won't work for me, so i must be doing something wrong...

:crazy:

- i have the 6GB disk image in my pearpc directory

- i have unzipped the win32-jitc version in my pearpc directory

- i've made a config file for my system, named "ppc_configfile", and it looks like this:

#PearPC configuration file

#Screen Resolution ID

#Current = 800*600*15

ppc_start_resolution=-1

#Redraw Interval in ms (1-999)

redraw_interval_msec=200

#Boot Mode : auto, select or force

#(force is not implemented in Config GUI yet)

prom_bootmethod="select"

#Boot Method : "-v" = verbose

#"-s" = single-user mode (usefull to format Mac OS X drive from Darwin)

prom_env_machargs="-s"

#This is needed if you want to boot Mac OS X

prom_driver_graphic="video.x"

#CPU config : defaults to 0x00088302

#cpu_pvr = 0x00088302

#Memory Size (default 128 MiB, must be >= 64 MiB)

memory_size=0x8000000

#IO Devices

#Master Device

pci_ide0_master_installed=1

pci_ide0_master_image="C:\pearpc\macosx_6gb_unjournaled.img"

pci_ide0_master_type="hd"

#Slave Device

pci_ide0_slave_installed=1

pci_ide0_slave_image="F:\Mac OSX 10.3 CD 1.iso"

pci_ide0_slave_type="cdrom"

#Network (unavailable on Windows)

pci_3c90x_installed=0

pci_3c90x_mac="de:ad:ca:fe:12:34"

#USB Device

pci_usb_installed=1

#NVRAM

nvram_file="nvram"

i've followed all the steps and yet it still won't work, for the love of God, someone freakin' enlighten me PLEASE!!!

everytime i double click on ppc.exe, it says usage: ppc configfile, and i don't have any clue what that means. should i be running my config file from the run window? if so, how do i do this? i'm not trying to be annoying, i just want a little help. thanks

Couple things:

Yes, you really should be running this from the "cmd" prompt.

1. this line: ppc_start_resolution=-1

should be this: ppc_start_resolution=4

2: this line: pci_ide0_slave_installed=1

pci_ide0_slave_image="F:\Mac OSX 10.3 CD 1.iso"

Is f: your CD-ROM? if so, this won't work... it needs to be an actual ISO made from something like Alcohol120 or Alcohol52 and put it in your pearpc directory.

If f: is actually a hard drive... never mind.

3: this line: prom_env_machargs="-s"

should be: prom_env_machargs=""

You can make these changes to the file "ppc_configfile" in notepad or wordpad (or any text editor). After you make the changes and save the file do the following:

goto Start>Run and type "cmd" (without the quotes) and hit enter

at the prompt type "cd \" (without the quotes) and hit enter

type "cd pearpc" (without the quotes) and hit enter

then type "ppc ppc_configfile"(without the quotes) and hit enter

you should then be prompted to select a boot partition (select the one that has the CD in it)

Hopefully, you will eventually get to the install screen.

You may need to open the disk utility and format the HD. If you get that far post back. I usually use the partition tab of the disk utility instead of the erase.

HTH,

Jon Davis

  • 0
Rising Star

phalanx126

Posted
Posted

thanks for yourr help jon, but everytime i attempt to run the config file from the run dialog, it gives me this message:

D:\pearpc>ppc ppc configfile (this is what i type in)

usage: ppc configfile (this is what it tells me)

and when i type in:

D:\pearpc>ppc ppc_configfile

ppc_configfile: I/O error: No such file or directory (this is what it tell me if i type in anything except the first example)

i'm not really sure why i won't run the file, the name of my configfile is "' ppc_configfile'' (with the space mark in the file name) . it's in the pearpc folder along with a .bat file with the same name. any ideas? :wacko:

  • 0
Explorer

niteowl

Posted
Posted
thanks for yourr help jon, but everytime i attempt to run the config file from the run dialog, it gives me this message:

D:\pearpc>ppc ppc configfile (this is what i type in)

usage: ppc configfile (this is what it tells me)

and when i type in:

D:\pearpc>ppc ppc_configfile

ppc_configfile: I/O error: No such file or directory (this is what it tell me if i type in anything except the first example)

i'm not really sure why i won't run the file, the name of my configfile is "' ppc_configfile'' (with the space mark in the file name) . it's in the pearpc folder along with a .bat file with the same name. any ideas? :wacko:

I followed the example from Kevin Rose on TechTV and downloaded his two premade config files for Darwin and Mac OS X.

Their file names are:

ppccfg.darwin

and

ppccfg.osx

The default config file that comes with the PearPC has an .example extension.

  • 0
Grand Master

Redestium

Posted
Posted
Great! Finally got it to work! I must say I'm quite impressed by how fast it works. Of course it is nowhere the speed of a real Mac but knowing how difficult PPC emulation is I expected it to perform a lot worse. Can't wait for the next version :)

Here's a screenshot:

Totally...and there were so many who said it couldn't be done.

  • 0
Veteran

Emon

Posted
Posted
I followed the example from Kevin Rose on TechTV and downloaded his two premade config files for Darwin and Mac OS X.

Their file names are:

ppccfg.darwin

and

ppccfg.osx

The default config file that comes with the PearPC has an .example extension.

u don't need any extensions for that config file .. its just a plain text file ...

This topic is now closed to further replies.
 Share
Go to question listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • AMD RX 9070 GRE AI, Blender benchmarks vs 9070 XT, 7800XT, Nvidia RTX 5070, 4070

      By hellowalkman · Posted

      AMD RX 9070 GRE AI, Blender benchmarks vs 9070 XT, 7800XT, Nvidia RTX 5070, 4070 by Sayan Sen Earlier this week, we shared the first part of our review of AMD's new RX 9070 GRE. It was about the gaming performance of the GPU, and we gave it an 8 out of 10. As a follow-up, similar to how we did with the 9070 XT and non-XT, we are doing a dedicated productivity review for the RX 9070 GRE as well, where we compare it against the 9070 XT, 9070, 7800 XT, as well as Nvidia's 5070 and 4070. This will include AI, rendering, compute, and more benchmarks. AI performance, especially, is a very important metric in today's world, and AMD also promised big improvements thanks to its underlying architectural improvements. We will be pitching it against the data we already have for the RX 9070, and RX 9070 XT, but also the Nvidia 5070 FE, MSI GeForce RTX 4070 VENTUS 2X 12G, and Gigabyte Radeon RX 7800 XT GAMING OC 16G as they are in a similar price class, but also because we do not have a comparable 5060 Ti card lying around here that we can compare it against. Before we get underway, this is a collaboration between Sayan Sen and Steven Parker, who lent me his test bed. Also, there was no editorial input from AMD. First up, the specs of the RX 9070, 9070 XT, and 9070 GRE, which were given to us by AMD: Radeon RX 9070 GRE Radeon RX 9070 Radeon RX 9070 XT Boost Clock: Game Clock: up to 2.79GHz up to 2.20GHz up to 2.52GHz up to 2.07GHz up to 2.97GHz up to 2.40GHz Stream Processors 3,072 (48 CU) 3,584 (56 CU) 4,096 (64 CU) Ray Accelerator 48 56 64 AI Accelerator 96 112 128 ROPs 96 128 Texture Mapping Units 192 224 256 Memory 12 GB GDDR6, 18Gbps Clock, 192-bit Bus 432 GB/s 16 GB GDDR6, 20Gbps Clock, 256-bit Bus Effective Memory Bandwidth: 640 GB/s Infinity Cache 48 MB (3rd Gen) 64 MB (3rd Gen) Card Bus PCI-E 5.0 X16 Output 2x HDMI 2.1b 2x DisplayPort 2.1a Power consumption 220W 304W Recommended PSU 650W 750W Slot width 2x 3x Price (SEP) $549 $599 As you can see from the specs above, it is less than the standard RX 9070 in every way that counts, except for slightly higher Boost and Game clock speed. Design Moving on, the RX 9070 GRE we were given is an XFX Swift triple-fan, dual-slot design with two 8-pin connectors. At 30cm (self-measured), it will fit in most systems easily. There is no RGB either. The AMD Radeon RX 9070 GRE by XFX from all angles. Test system Our test system consists of the following: Lian Li O11 Dynamic Mini V2 Flow (Amazon|Newegg) ASUS Z890 ProArt Creator WiFi (Amazon|Newegg) Intel Core Ultra 7 270K Plus (Amazon|Newegg) Thermal Grizzly KryoSheet - 44x37 (Amazon|Newegg) 2x 16GB G.Skill Trident Z5 RGB (7200 MT/s in XMP) (Amazon|Newegg) Sabrent Rocket4 Plus 2TB SSD (Amazon) Windows 11 25H2 (Build 26200.8246) AMD shared a press driver based on the recently released Adrenaline 26.5.2 that we were required to use. We now move on to our benchmarks. First up, we have Geekbench AI running on ONNX. For some reason, the 9070 GRE does exceptionally well here in both half-precision (FP16) and single-precision (FP32). It manages to beat the RTX 5070 and RX 9070 non-XT, and is only behind the 9070 XT. Since Geekbench runs in short bursts instead of continuously hammering the graphics card, it seems the GRE's faster boost clocks are helping here. Next up, we move to the UL Procyon AI test suite, starting with the image generation benchmark. We chose the Stable Diffusion XL FP16 test since it is the most intense workload available on Procyon. The Nvidia cards do very well here, as even the 4070 out-muscles AMD's best fairy easily. The positive thing about the GRE is that it gets quite close to the 9070 non-XT in this test; this indicates that the VRAM does not play a very big role here, as SD XL relies on float16 (FP16). So this is something to keep in mind again. If you wish to work with float32 AI workloads, graphics cards with larger than 12 GB buffers would likely emerge as victors. Regardless, the gains are still massive on AMD's 9000 series compared to the 7000 series. Following image generation, we move to the text generation benchmark. This is one test where the 9070 GRE struggled, quite a lot. It seems that the 12 GB VRAM and lower memory bandwidth of the new Radeon 9070 GRE are hurting it quite a bit; the split is massive, especially in a test like Llama2, which packs 13 billion parameters. As such, in all the tests, the 9070 GRE is the slowest of the lot. Next, we tried Blender, and here the AMD GPUs were beaten by Nvidia. Rendering is something the Green team has always had a lead over the Red side, and it has not changed so far. On the positive side, though, the 9070 GRE shows significantly better results than the 7800 XT, which means AMD is on the right path. Catching up to Nvidia, though, will require a lot more effort. And we hope HIP and ROCm can keep improving. Wrapping up AI testing, we measured OpenCL throughput in the Geekbench compute benchmark. The RX 9070 GRE alongside the 9070 did not fare well here at all, even falling behind the 7800 XT. Interestingly, even the RTX 5070 could not beat the 4070 on OpenCL, so perhaps this suggests that OpenCL optimization may not have been a priority for either AMD or Nvidia in the modern era. Conclusion We reached the end of our productivity performance review of the 9070 GRE, and we have to say it's a mixed bag. Unlike the 9070 and 9070 XT, the GRE excels in some areas while losing ground fairly easily in others. Similar to how it happened in gaming, any time the card's memory subsystem gets hammered, it tends to fall behind the others. This was the case with text generation, wherein we saw the VRAM sometimes hit its maximum available 12 GB of usage with larger model sizes. So what do we make of the RX 9070 as a productivity hardware? It can certainly be used, but you have to know it has its limitations. For those looking for a GPU that can deal with more, AMD recently unveiled the Radeon AI PRO R9700, which is essentially a 32 GB refresh of the 9070 XT with some additional workstation-based optimizations. On a similar note, the new Ryzen AI Halo platform is something you can consider if you want to set up a local AI processing station. Considering everything, we rate AMD's Radeon RX 9070 GRE a 7.5 out of 10 for its productivity performance. Price is less of a factor for those looking at productivity cases compared to those considering the GPU for gaming, and as such, we felt it did quite decently on many occasions and can be handy if you need a 12 GB GPU and, for some reason, don't want to get Nvidia. Purchase links: RX 9070 / XT / GRE (Amazon US) As an Amazon Associate, we earn from qualifying purchases.
    • Microsoft released new Defender update for Windows 11, 10, Server ISO installations

      By skinnyJM · Posted

      Does anyone here know if these updates are integrated into the UUP dump isos?
    • Motrix Next 3.9.4

      By Copernic · Posted

      Motrix Next 3.9.4 by Razvan Serea Motrix Next is a modern, open-source cross-platform download manager built as the official next-generation successor to the original Motrix project. It has been completely rewritten using Tauri 2, Vue 3, TypeScript, and Rust, while still relying on the powerful Aria2 download engine for high-speed multi-protocol transfers. The app supports HTTP, HTTPS, FTP, BitTorrent, ED2K and magnet links, offering advanced features like multi-connection acceleration, task scheduling, bandwidth control, and batch download management. With a significantly reduced install size (around 20MB), it focuses on being lightweight, fast, and resource-efficient compared to traditional Electron-based download tools. Designed for Windows, macOS, and Linux, Motrix Next delivers a clean, modern UI inspired by Material Design 3 principles, with smooth animations and a minimal workflow. It improves usability through better download organization, system tray integration, and enhanced torrent handling including selective file downloads and tracker management. Motrix Next features: Multi-protocol downloads — HTTP, FTP, BitTorrent, Magnet, .torrent, ED2K, and Metalink tasks BitTorrent — Selective file download, DHT, peer exchange, encryption controls, metadata caching, GeoIP peer flags, and tracker probing Browser extension integration — Embedded Extension API with independent authentication, download confirmation, smart auto-submit, filename hints, referer/cookie forwarding, and real-time controls (Chrome Web Store · Edge Add-ons) Safe filename handling — Content-Disposition, RFC 2047, non-UTF-8, percent-encoded, and extensionless URL resolution with path traversal sanitization Download organization — Favorite and recent folders, optional file-type categorization, stale-record cleanup, and completed history backed by SQLite Concurrent downloads — Independent controls for active tasks, HTTP connections per server, segments per file, and BT peer limits Speed control — Global and per-task upload/download limits with day-of-week and time-of-day scheduling System integration — Tray operation, optional tray speed display, macOS Dock badge/progress, protocol handlers for magnet://, thunder://, and motrixnext:// Lightweight mode — Destroys the WebView on minimize-to-tray while Rust keeps the engine, task monitor, notifications, history, and extension routing alive Notifications and power options — Native task start/complete/failure notifications, keep-awake during downloads, and optional shutdown after completion Network controls — Scoped proxy support for downloads, app updates, and tracker updates, plus system proxy detection Auto-update channels — Stable, Beta, and Latest Across Channels policies with separate download and install phases Diagnostics — Structured logs, exportable diagnostic ZIPs, database integrity checks, automatic DB rebuild, and Linux GPU rendering fallback Personalization — Light/dark/system theme, 10 color schemes, 26 languages, and first-launch system language detection Motrix Next 3.9.4 changelog: Motrix Next 3.9.4 promotes the 3.9.4 beta cycle to stable. This release refreshes bundled engine binaries, improves task detail readability and copy actions, expands link handling for magnet and ED2K workflows, polishes responsive navigation and text wrapping, updates browser extension documentation, and refines network preference controls. New Features Task Detail copy actions — Added copyable values for task metadata and reusable render functions for long text fields. Magnet and ED2K lifecycle support — Added task lifecycle handling for magnet and ED2K links. History cleanup for deleted tasks — Deleted tasks can now remove matching history records. User-Agent management — Added user-agent management and improved related network preference controls. Browser extension documentation — Added the Firefox Add-ons link for the Motrix Next extension. Improvements Engine binaries — Updated bundled binaries for supported architectures. Task Detail readability — Long task names, URLs, tracker values, and copyable metadata now render more clearly. Deletion messaging — Refined localized task deletion text for clarity and consistency. Text wrapping — Improved URI input wrapping and task name multiline display. Navigation layout — Improved sub-navigation responsiveness. Disk allocation default — Changed the default file allocation method to trunc. Proxy controls — Improved proxy button styling in network preferences. Download: Motrix Next 64-bit | ARM64 | macOS ~20.0 MB (Open Source) Links: Website | macOS / Linux | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • AMD 9070XT

      By Steven P. · Posted

      NVIDIA officially supports Ubuntu, as linked above with the GeForce NOW Hands on I did in collaboration with Paul Hill.
    • AMD 9070XT

      By cooky560 · Posted

      TO be clear I am not running linux today, however I keep thinking about it. And I want to make sure there are minimal obstacles if I decide to make that switch in the coming months.

  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator

  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      244
    3. 3
      Steven P.
      72
    4. 4
      FloatingFatMan
      66
    5. 5
      +Edouard
      66
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!