• 0

Running Mac OS X on x86 PC!

Asked by S.MULLA,

 Share

Question

3213 answers to this question

Recommended Posts

  • 0
Contributor

KlyX

Posted
Posted

*lol* too, realliy nice this screenie.

About the Nightly builds. I'm trying these for days now an at the moment with the athlon xp optimized and it looks like this would not be much fastern.

And about the RAM: I think 256 MB is quite okay, because there is a little difficult: PearPC has to emulate the RAMs. So it works slower if it has to emulate more RAM, BUT on the other side it should speed up the OS X System. So 256 is the mid-way (or something like this ;) ).

  • 0
Apprentice

evacsoul

Posted
Posted
sorry about the confusion, but i changed it to D in my new config as well. i tried evacsoul's suggestion and i managed to get the PPC screen, but then i get this message:

[CPU/MMU] new pagetable: sdr1 = 0x00300003

[CPU/MMU] new pagetable: sdr1 accepted

[CPU/MMU] number of pages: 2^15 pagetable_start: 0x00300000 size: 2^18

[iO/PROM] <Error> Can't open boot file

right before i get the last line with the error, PPC shows only one bootable partition, labeled:

"1. partition 2 of 'disk0' (Apple_HFS_Untitled_2/Apple_HFS)

i pick this as my choice and then i get the error...

What's the name of your install cd image?

  • 0
Grand Master

Rudy

Posted
Posted

ok well im thinking about trying it, now i have a question for you guys

i have both Fedora Core 2 and Windows XP Pro installed on my PC.....Which one should i use? the Linux version on Windows? I was thinking Windows because the drivers for my hardware are better but i dont know if it matters or not

  • 0
Veteran

Emon

Posted
Posted
ok well im thinking about trying it, now i have a question for you guys

i have both Fedora Core 2 and Windows XP Pro installed on my PC.....Which one should i use? the Linux version on Windows? I was thinking Windows because the drivers for my hardware are better but i dont know if it matters or not

u probably should try it on Linux .. Networking works there but doesn't work in windows

  • 0
Rookie

Keitero-sama

Posted
Posted
I got that error for a while. What is the exact filesize of your disk image when you get that error?

When I recieved that error, I found that my 6gb images were only extracting to ~4 gigabytes (hence, the faulty disk geometry). I checked the disk the PearPC was on and found out to be a Fat32 drive.

A Fat32 drive will only support filesizes up to ~4gb in size, hence the whole disk image could not be extracted and used.

I converted my drive to NTFS and it created the whole 6gb drive file that worked perfectly.

Here lies that issue, all my drives are NTFS.

  • 0
Rising Star

phalanx126

Posted
Posted

evacsoul, the name of my cd image is 'Mac OSX 10.3 CD 1.iso' . is this supposed to be an .img file?

also, i used ultraiso to convert Mac OSX 10.3 CD 1.dmg to Mac OSX 10.3 CD 1.iso, but i've heard that converting from .dmg to .iso on a PC isn't possible. could this be the problem?

This topic is now closed to further replies.
 Share
Go to question listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Browser vendors pen open letter to Microsoft saying "enough is enough"

      By olavinto · Posted

      You can't remove Safari though. Or almost any other bundled app for that matter, and pretty much all of them are useless to me (and there are is a heap of them compared to Windows). I'll much rather take Edge than Safari, at least it can be highly customized vs. Safari. I'll take a PC with ten Edges over a Mac any day though as I can't stand all the limitation and painfully frustrationg restriction that make me dislike their stuff with a burning passion, iOS included (especially iOS).
    • WinXDVD 20th Anniversary Sale: Up to 64% Off DVD Ripper and AI Video Tool (Lifetime License)

      By olavinto · Posted

      DVD only? What kind of self-respecting optical disk backup/ripping tool doesn't support Blu-ray these days? I burned all my DVDs like 15+ years ago...
    • WinXDVD 20th Anniversary Sale: Up to 64% Off DVD Ripper and AI Video Tool (Lifetime License)

      By olavinto · Posted

      I'd love to hear your dad's opinion?
    • Hi my name is Olivia and I am from Australia

      By Jim K · Posted

      ...but you're Johnny, from Australia?    
    • Glow 26.9

      By Copernic · Posted

      Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware

  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      +Edouard
      75
    4. 4
      Skyfrog
      74
    5. 5
      Steven P.
      71
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!