• 0

Running Mac OS X on x86 PC!

Asked by S.MULLA,

 Share

Question

3213 answers to this question

Recommended Posts

  • 0
Enthusiast

aka JAWheat411

Posted
Posted

OK for all those having problems getting 10.3.4 connected to the internet I have fixed mine easily. Just follow these steps.

1) Go to your network connections in Windows Network.Right click your main connection and go to properties. Turn off Internet Connection Sharing.

2) Highlight both connections, your main one and the VPN connection. Right click and select Bridge.

3) Reboot your OS X in PearPC making sure PearPC closes completely. Restart it and interent should work.

At least that is how I got mine working.

  • 0
Enthusiast

aka JAWheat411

Posted
Posted

I don't think it matters. Best way to do it is try it. Bridging connections mainly just lets you go from one LAN to another LAN seamlessly.

OH and I could browse my other pc's on the lan easily by using that suggestion a few pages back.

Then go to the Mac, click "Go > Connect to Server" and type in the following:

CODE

smb://mycomputer/

Obviously, you replace "mycomputer" with the network name of your PC. Mine is \\Yorbamicro, for example. So I would type smb://yorbamicro. It's self-explanatory from there.

  • 0
Enthusiast

Skywing

Posted
Posted

well, after 2 attempts to reinstall it and it quitting twice at the same time, about 2 hours in, i think ive come to the conclusion that my OSX ISO has been corrupted, it was fun while it lasted, i got everything working fine, however i no long have the patience for it, when it gets a little faster ill give it a go again

  • 0
Veteran

Fonze

Posted
Posted

I just read something on Toms Hardware about an app for making programs that don't use multiple processors work faster on a P4 with HT by making them use 100% of the physical cpu.

Aparently, if you go to task manager and set the Affinity of the ppc process, uncheck CPU 1, it will force ppc to run on CPU 0 which is the physical processor. they are saying that HT splits your cpu up into 2 cpus, the physical and the virtural in task manager, and CPU 1 is the virtural processor.

They also said you can disable HT in the bios but you will be losing performance because windows xp works more efficiently with 2 cpus or HT so it's not beneficial to disable it just for one or two apps.

they also have an application, from the article, that will save these settings for certain apps so you won't have to change the affinity every time you start pearPC

  • 0
Rising Star

proph

Posted
Posted

Hey guys - I just finished installing OS X and I've run into a problem. I'm using - http://s87840517.onlinehome.us/pearpc.html - to guide myself through the setup process.

I did the following:

Step 13: PearPC will quit itself after the installation. Before you restart PearPC, go inside

C:\pearpc\pearpc-0.1.1-win32-jitc folder and open the ppccfg_HD.txt file with your favorite text editor.

go to the line pci_ide0_slave_installed = 1 and change that 1 to 0

Save the file.

And I started up PearPC, and it won't load. I see the PPC command line thing window, with a Partition loading area. I need to do the "BOOT FIX".

Here's my problem: When I do this step - Step 4: A command line prompt will appear. Run command "pdisk" (with out the " ") - I don't see any "command line". Here's a screenshot of what I see. If anyone can help, it would be truly lovely.

  • 0
Grand Master

Steve

Posted
Posted

Why is this thread NOW moved to 'Discussing Mac OS'. It blatantly ISN'T Discussing Mac OS, but emulation for an application designed for Windows and Linux. What use is this thread to Mac users? None - All it does do, IMO is draw more 'Windows' users to a forum for which they have no base - probably increasing trolling in the process - could someone please move this thread to somewhere where it'd be more fitting?!

  • 0
Grand Master

Liquid

Posted
Posted
Hey guys - I just finished installing OS X and I've run into a problem. I'm using - http://s87840517.onlinehome.us/pearpc.html - to guide myself through the setup process.

I did the following:

And I started up PearPC, and it won't load. I see the PPC command line thing window, with a Partition loading area. I need to do the "BOOT FIX".

Here's my problem: When I do this step - Step 4: A command line prompt will appear. Run command "pdisk" (with out the " ") - I don't see any "command line". Here's a screenshot of what I see. If anyone can help, it would be truly lovely.

His guide isn't clear. Use mine

Guide

What you need to do is type in shell and press enter and then type pdisk. Are using darwin though? You need darwin for the boot fix.

  • 0
Grand Master

oldaccount1

Posted
Posted
Why is this thread NOW moved to 'Discussing Mac OS'. It blatantly ISN'T Discussing Mac OS, but emulation for an application designed for Windows and Linux. What use is this thread to Mac users? None - All it does do, IMO is draw more 'Windows' users to a forum for which they have no base - probably increasing trolling in the process - could someone please move this thread to somewhere where it'd be more fitting?!

Lol. Is this a joke? It's a discussion about running Mac Os. Lol you've got to be kidding me. Lol!

This topic is now closed to further replies.
 Share
Go to question listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • An actual cosmic "Eye of Sauron" had been looking straight at us all along

      By hellowalkman · Posted

      yep, thanks!
    • WebChangeMonitor 26.06

      By Copernic · Posted

      WebChangeMonitor 26.06 by Razvan Serea Monitors allows you to quickly check a number of web pages and tracks changes based on the content of the web pages. Allows to monitor several protocols, including HTTP and HTTPS. Allows to view and record differences. Available for Win7/10, Linux and others. WebChangeMonitor features: Allows monitoring of web pages and informs about content changes Indication of states of currently monitored items in the tool and taskbar Reporting as sound and/or email as well as log file or HTML log Several configuration / filter options Support all protocols, e.g. http, https Multi-threaded, running in the background Bulk-import and bulk-export of items (from/to CSV) to monitor Export of results to CSV file for further processing Allows running command on items states and/or showing diff (changes) of content with preferred diff-tool ...and many more! Open Source (C++, wxWidgets) Cross platform for Windows (7/10), Linux, RPi and Mac (if self-compiled) WebChangeMonitor 26.06 release notes: Release 26.06 brings mostly s but updates the underlying core infrastructure. A major compiler is used for both x86/x64 and WoA64 architectures. This also means that all core libraries are re-compiled accordingly which required some changes in the build scripts. One of the core libraries (cURL) has been updated to address vulnerabilities and a nasty linker error that was causing the need for a dedicated patch which could now be eliminated. Download: WebChangeMonitor 64-bit | Setup 64-bit | ~10.0 MB (Open Source) Download: WebChangeMonitor 32-bit | Setup 32-bit View: WebChangeMonitor Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • BATorrent 3.0.4

      By Copernic · Posted

      BATorrent 3.0.4 is out.
    • Microsoft resumes forced Copilot app installation on some Windows PCs

      By contevo · Posted

      yea they change their app to high-system app so you can't disable with adb or within android, you gotta get root be able to do disable this high-system app now if you have locked down boot loader you screwed. samsung started locking down their store and their account app extremely annoying, account constantly nagging you to sign in... i disable all ai core apps and especially gemini since you can't uninstall anymore. i hope some day someone will present a bill force this companies quit locking down this damn phone especially the apps...
    • Ladybird Browser is no longer accepting outside contributions thanks to AI

      By fishnet37222 · Posted

      It's basically the only web browser project not controlled by a major corporation.

  • Recent Achievements

    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      482
    2. 2
      PsYcHoKiLLa
      257
    3. 3
      Steven P.
      74
    4. 4
      +Edouard
      69
    5. 5
      Skyfrog
      68
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!