• 0

Running Mac OS X on x86 PC!

Asked by S.MULLA,

 Share

Question

3213 answers to this question

Recommended Posts

  • 0
Neowinian

xSDMx

Posted
Posted

For some odd reason when ever I finish installing my CMD prompt says "reset" and then I try to run ppc ppccfg.osx and it will not boot the HDD incase you need to know I used the EMACULATION pre-formatted HDD but I am not sure what is wrong; could someone create a post with a full guide and links to the newest versions of everything and the patched including the fullscreen patched as well as a very good config file?

Thanks,

SDM :woot: :shifty:

  • 0
Veteran

TheReaperMan

Posted
Posted
For some odd reason when ever I finish installing my CMD prompt says "reset" and then I try to run ppc ppccfg.osx and it will not boot the HDD incase you need to know I used the EMACULATION pre-formatted HDD but I am not sure what is wrong; could someone create a post with a full guide and links to the newest versions of everything and the patched including the fullscreen patched as well as a very good config file?

Thanks,

SDM :woot: :shifty:

mmm hay i am not being funny, but read from the begining of this topic it fills in all the info you need to setup, guides, hd, configs, etc etc

PS we all need to start somewere :D

  • 0
Mentor

amr_01

Posted
Posted
uuuhh I am, I had the preformatted and it worked just fine... dont know what your problem is

i don't have a problem, i just thought i remembered reading early on that there was a problem with using journaled. and i am reinstalling, so i wanted to know if there was. since there doesn't seem to be, i'll use that.

  • 0
Veteran

TheReaperMan

Posted
Posted
I'm to lazy to read over 1000 posts as I have been stalking this thread for a while but haven't read the whole thing.... :yes:

Bluetooth: Maybe it is my config files as I borrowed it from another user and edited it to my using.

i justed edited the supplyed one to my liking, got sick of the gui's not working right for me(even tho i give them credit for there work)

  • 0
Grand Master

HellBender

Posted
Posted

I wish I could get networking :( But ever since I installed OpenVPN and I try to go to Properties of my LAN connection, explorer.exe crashes :(

Is your guys' installation useable? Mine takes like 30 seconds for anything to come up, too slow for usability.

  • 0
Rising Star

Adster01

Posted
Posted
Well, the networking build from that richards site didn't work for me, I had to grab the other one and now it works sweet. I can only imagine where this app will go int he future :|

I'm also gagging for 1600 x 1200 full screen usage :o

Which version are you using Dazzla? Could you post a link? I'm using SP1.

  • 0
Proficient

bolerodan

Posted
Posted

okay i got past my earlier problems i posted, pearpc now boots and mac os X detects the card, but i cant get a right IP or get DHCP to get ther ight ip for the net to work... i can Ping my computers real ip, aswell as my ISP's dns servers.. but nothing works..

-bolero

  • 0
Veteran

TheReaperMan

Posted
Posted
okay i got past my earlier problems i posted, pearpc now boots and mac os X detects the card, but i cant get a right IP or get DHCP to get ther ight ip for the net to work... i can Ping my computers real ip, aswell as my ISP's dns servers.. but nothing works..

-bolero

did you try manual ip in pearpc(osx), and do you have more than one network card in your pc??

  • 0
Proficient

bolerodan

Posted
Posted
did you try manual ip in pearpc(osx), and do you have more than one network card in your pc??

yeah i tried manual, i did exactly as what that tutorial says... in network connections in winXP i have my connection which is shared and the tap-win32 connection.... the tap win32 connection has its ip as 192.168.0.1

when i follow the tutorial says to put it to manual (since dhcp seems to not work) i put my ip in mac os x as 192.168.0.1 but it says it is already in use

-bolero

This topic is now closed to further replies.
 Share
Go to question listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Browser vendors pen open letter to Microsoft saying "enough is enough"

      By olavinto · Posted

      You can't remove Safari though. Or almost any other bundled app for that matter, and pretty much all of them are useless to me (and there are is a heap of them compared to Windows). I'll much rather take Edge than Safari, at least it can be highly customized vs. Safari. I'll take a PC with ten Edges over a Mac any day though as I can't stand all the limitation and painfully frustrationg restriction that make me dislike their stuff with a burning passion, iOS included (especially iOS).
    • WinXDVD 20th Anniversary Sale: Up to 64% Off DVD Ripper and AI Video Tool (Lifetime License)

      By olavinto · Posted

      DVD only? What kind of self-respecting optical disk backup/ripping tool doesn't support Blu-ray these days? I burned all my DVDs like 15+ years ago...
    • WinXDVD 20th Anniversary Sale: Up to 64% Off DVD Ripper and AI Video Tool (Lifetime License)

      By olavinto · Posted

      I'd love to hear your dad's opinion?
    • Hi my name is Olivia and I am from Australia

      By Jim K · Posted

      ...but you're Johnny, from Australia?    
    • Glow 26.9

      By Copernic · Posted

      Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware

  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      +Edouard
      75
    4. 4
      Skyfrog
      74
    5. 5
      Steven P.
      71
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!