Recommended Posts

one thing I have noticed that kind of bugs me...when I dont have a connection, it pops up saying cant get data...thats fine and dandy, but it keeps doing it over and over (I assume everytime it checks?)? Can you make it so once it displays it once, perhaps have a var that set to true that its been shown during the current offline...and not show it again until it once again downloads info and then goes offline again?

basically...only show the 'cant get data' balloon once per going offline?

585330346[/snapback]

Good idea. I am never offline so I didn't think of such things (I test it to make sure it works offline but didn't realize things like balloon tip annoyance).

hey there..have some feedback from a friend. I passed this prog onto him and he wanted to set the extreme temp notification when it goes below -20C? .. the prog only goes as low as 0.? It would be nice to have this accept negative values as during winter here, i'd consider -20 starting to get extreme as right now its -22 but feels like -3;) ;)

(this is all metric)

is it doable?? perhaps a max of -50C just to cover all bas:)? :)?

i've attached a screenshot of the pref dialog i'm referring to

this is why I request :(is :(

585334897[/snapback]

That was shortsighted of me. I will lower that.

Ok, I have an interesting problem.

At some point, I got an alert.? For whatever reason, instead of clicking OK, I accidentally clicked on Forecast (I've done this with "RADAR" as well).? It switched to the screenshot where the forecast would be below the current conditions, and went absolutely crazy.? I've attached a screenshot for you, but it doesn't do it justice.? It's flipping up and down inside of it's window so fast, you can't click anything except the CLose button.? And, it gives me the "WeathAlert Program is not responding" error.? I have to click End Now to close it.

This was with 2.9.2, but when I upgraded just now to the latest version, it's still doing it.? The only solution I found in the past was to clear out the registry entries, and act like it's a clean installation.

585336011[/snapback]

That is, I'm guessing, an issue with the window docking (it docks to the bottom, but it's still close enough to the top, so it docks to the top--you see where this goes). I thought I had taken sufficient precautions to ensure that it wouldn't do that again. I wish you'd mentioned it earlier. What resolution are you running?

Whenever I set the tray icon to transparent, it doesn't go transparent. There's a really ugly opaque blue around the temperature. WTF?

585337125[/snapback]

post-11870-1106417141.png

Hi there.. I have another request :o :laugh:

I was wondering if it would be possible to implement Proxy Authentication to the program? at work, only port 80 works and even then, i cant get through without putting in a username/password. i dont know if this feature would benefit anyone else but it'd be of use to me :)

Hi there.. I have another request :o  :laugh:

I was wondering if it would be possible to implement Proxy Authentication to the program?  at work, only port 80 works and even then, i cant get through without putting in a username/password. i dont know if this feature would benefit anyone else but it'd be of use to me :)

585378258[/snapback]

I will see what I can do.

Hmm, it seems someone is interested in buying my program:

Hi Mark,

please let me know if you are interested in selling your WeatherAlert application and all its rights: http://www.ic.sunysb.edu/stu/msowul/weathalert.htm

If you do, please let me know the price tag.

I would like to buy the program, rights and source code.

Sincerely,

...

I'm not quite sure what I should do; on the one hand money = good but on the other, it's sort of been my pet project for the last 10 months. Hrm.

Well depends on their plans. Do they want to keep it freeware or make it shareware or what?

If freeware I say go for it if you want but if shareware or worst then we need some details.

And totally up to you in the end.

Though it would be nice of you to ask your "customers" first. ;) As your doing. :)

I think you've made a great program, you've worked hard on it and im sure a little money for all that hard work would be nice :yes: but I would certainly like to know how they would continue the project.

Thanks for asking our opinions mark :)

No update on the program sale yet, I plan to meet with a lawyer today about it. I have totally redone my website though, so please check it out and give me feedback. The weathalert section is actually complete now, so please feel free to check out the "icons" section to find out how to skin the icons, and if you make any sets, let me know and I'll post them!

I had a idea about the customizability you added.

What about making them load out of .zip files or something, so you could have multiple themes?

If you did that, it would allow someone to add a theme, but without having to wipe their old images or back them up (which everyone forgets to do once in a while)

You could also add a preview option (like firefox's), and could have a preview image in the .zip file, you could also have the ability to include a readme.txt file in the theme .zip, and have a button in your app which shows it (either in notepad or a custom window for example)

Anyway, that's just a suggestion.

As always, great program.

  • 2 weeks later...

I have some very good news, I have finally found the cause of most if not all of those random little errors that occur when the program is open for a long time, and have also fixed a Handle leak (not as critical since the GC was fixing each time it would hit a certain threshold but still good)...apparently making icons from bitmaps (such as the tray icons and the statusbar icon) by getting handles requires those handles to be deleted. I did not know this, because I thought all of that was managed. The result is that there is a leak every time those are created, e.g. each time data is downloaded. You can see this by going to task manager and showing the columns "handle count", "gdi objects" and "user objects". Once the leak is to much, getting the icon handle fails and the program gives an error. The ever-increasing handles are due to the fact that I didn't realize registry keys needed to be manually closed (it reads the registry each time it queries an option). I am running it now and those three things are finally stable. I do need to do some more testing before I release this but this should bring a quantum leap in stability over long periods of time. In addition of course, I have fixed a few other small errors, for example the "only one instance" feature added last time doesn't work right if you don't have performance counters enabled, because it uses that to get the information needed to activate the previous instance. Expect release in a few days or so. I haven't begun working on features yet, I have not had any time lately.

  • 2 weeks later...

Mark,

I sent you an email a while back about a "feature" I'd like added. You said you'd get to it. I haven't noticed you mention it or implement it. So I thought I'd mention it again.

It was about the NWS weather alerts. You show them and, say I want to go look at the radar, there is no way to re-display the alerts. Any word on when this might be added?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Same, never saw it on Android or iOS. Guess only some people got it *shrugs*
    • Anthropic pulls Fable 5 and Mythos 5 after US export control order by Pradeep Viswanathan In April this year, Anthropic launched the Claude Mythos Preview frontier model with state-of-the-art cyber and coding capabilities for a select set of companies around the world. After preparing appropriate guardrails, early this week, Anthropic launched Claude Fable 5 and Mythos 5, its most capable AI models. Claude Fable 5 is for general users and comes with strict safeguards, while Mythos 5 is designed with fewer safeguards for cybersecurity and biology use cases. Today, Anthropic abruptly suspended access to its Fable 5 and Mythos 5 AI models for all customers after receiving an export control directive from the US government. The company received the directive from the government today at 5:21 p.m. ET, and the received letter did not provide any details regarding the national security concern. Anthropic understands that the government became aware of a method to bypass, or “jailbreak,” Fable 5, which might be the reason behind the directive. The order was issued under national security authorities and requires the company to suspend all access to Fable 5 and Mythos 5 by any foreign national, whether they are inside or outside the United States. The restriction also applies to foreign national employees working at Anthropic. As a result, the company has disabled both models for all customers to ensure compliance. Access to previous Anthropic models like Opus and Sonnet is not affected by this government order. The company highlighted that it had developed strong safeguards to reduce the possibility that Fable is misused for tasks related to cybersecurity. In fact, many developers are complaining that the safeguards are going overboard. Additionally, the company worked with the US government, the UK AISI, multiple private third-party organizations, and internal teams to red-team Fable’s safeguards for thousands of hours. Finally, Anthropic noted that no testers have yet been able to find a universal jailbreak on Fable 5. As expected, Anthropic disagrees that a narrow potential jailbreak should lead to the recall of a commercial model used by hundreds of millions of people. It warned that applying this standard across the AI industry could effectively halt new frontier model deployments. Anthropic concluded by mentioning that it is working to restore access to Fable 5 and Mythos 5 as soon as possible and plans to share more details within the next 24 hours.
    • Brave Browser 1.91.172 is out.
    • Any Video Converter Free 9.2.3 by Razvan Serea Any Video Converter is an All-in-One video converting tool with an easy-to-use graphical interface, fast converting speed and excellent video quality. Any Video Converter supports all popular video formats and converts your videos to different video formats including MP4, MOV, MKV, M2TS, M4V, MPEG, AVI, WMV, ASF, OGV, WEBM, and more. It supports converting videos to customized percent (50%, 100%, 200%, and more) or resolution (480p, 720p, 1080p, 4K, and more); It supports encoding videos into x264, x265, h263p, xvid, mpeg, wmv, and more. Any Video Converter Free key features: Compatible with Windows 11/10/8.1/8/7 (32-64bit) User interface are available in 14 languages Convert all kinds of video formats including high-definition videos Extract audio from any videos and save as MP3/WMA for your mp3 player Take snapshot from any videos and build your own picture collection Support high-definition for both input and output Batch add videos from hard drive and batch convert Customize output parameters completely as you like Manage your output videos files by group or output profile Merge several video files into a single and long one Clip a video into segments Free Audio Filter: Adjust audio volume and add audio effects Crop frame size to remove black bars and retain what you want only Adjust the brightness, contrast, saturation Rotate or flip or add noise/sharpen effects Produce output video with subtitles of your own dialogue and much, much more... Any Video Converter Free 9.2.3 changelog: Fixed video download engine auto-update failures. Added custom speed control support in the speed change tool. Added support for downloading YouTube AI-generated subtitles. Added support for preserving original audio stream in the format convert tool (e.g., Dolby Atmos, DTS:X). Fixed other bugs and improved overall performance. Download: Any Video Converter Free 9.2.3 | 7.6 MB (Freeware) View: Any Video Converter Free Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Not sure what country you’re in but in many countries you can absolutely jail the sellers behind businesses… in fact I’d say in most countries you can do that
  • Recent Achievements

    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
    • Rookie
      Rimplesnort went up a rank
      Rookie
    • One Year In
      Markus94287 earned a badge
      One Year In
    • One Month Later
      Markus94287 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      176
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      ATLien_0
      92
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!