Recommended Posts

When my PC was brand new it took about 10-15 seconds to start; now though, i've got everything I need on it and its more like 25 seconds.

I think I may try the prefetch clear out thing, but I've also got that problem where it takes you about a minute to shut down.

:( :blink:

mine takes about 15-20 secs. 5secs for post and the dos stuff, then 15 to load windows + auto-logon. :D

Maxtor 80GB 7200RPM SATA, 1.67GHz Athlon XP, XP Pro SP1, 512MB PC2700 DDR Ram; slow i know, but upgrades comin sooooon :D

on a fresh install it can do it under 10secs. that shows how gd a fresh SATA drive is :D :D :D :D!!!!

First thing it takes 2 sec at dos post screen, then another 2 sec at blank screen before XP startup screen, 1 sec (barely 1 loop) at XP startup screen, then another 2 sec of blank screen before the windows classic logon, so about 7 sec to boot up entire windows not counting logon screen because I'm there the instant the desktop loads, but since I'm the only user of my own personal custom built PC and have autologon enabled, I would have to say it takes about 3 sec to reach the desktop. So if you add all that up, it takes about 10 sec to reach the desktop after I turn on my PC, I also have specs to my PC listed below as well, have a look if you want. :happy:

<u>My PC Specs:</u>

Windows XP Pro SP1

Biostar M7NCD v3.0 with nFORCE2 400

AMD Athlon 1.6 GHz

128MB system ram

40GB hard disk (3 partitions, 12.7GB each)

Sony CDX140E CD-RW drive

Gateway VX700 on NVIDIA GeForce2 MX400 AGP 64MB video card

Current Resolution: 1152x864 pixels with 32-bit color and 85Hz

Max Resolution: 1600x1200 pixels with 32-bit color and 60Hz

  • 1 month later...

I'm I the only one who keeps a log of his boot time??

my average for the past 25 days has been 42.3sec (from the second I push the button, until all apps have loaded and is 100% funtional)

used to be like 15 or so... but that was before I instaled the anti-vrius, firewall, Twak XP and SP2.

hey... as long as it's less that a min... it's ok.

Mine takes about 1 minute, from the time I push the button to start the computer and the time windows is fully operational.

How the hell do you guys get 20 seconds? I mean, I have a high-end desktop system, yet I get one minute to start it.

My system is : Athlon XP 3000+, ATI Radeon 9800 PRO, 512 MB RAM, Motherboard A7N8X-X, nForce2 chipset, 200 GB hard drive, about 2 USB devices.

I have Norton antivirus 2005, catalyst 4.10 w/ control panel and some other drivers.

Is there any way I could get a 30 seconds boot time with this? :unsure:

Or do you guys even shut down the PC, or you use the hibernate mode or whatever it is called? (I remember using it like 1 time in my life! lol)

Mine takes about 1 minute, from the time I push the button to start the computer and the time windows is fully operational.

How the hell do you guys get 20 seconds? I mean, I have a high-end desktop system, yet I get one minute to start it.

My system is : Athlon XP 3000+, ATI Radeon 9800 PRO, 512 MB RAM, Motherboard A7N8X-X, nForce2 chipset, 200 GB hard drive, about 2 USB devices.

I have Norton antivirus 2005, catalyst 4.10 w/ control panel and some other drivers.

Is there any way I could get a 30 seconds boot time with this? :unsure:

Or do you guys even shut down the PC, or you use the hibernate mode or whatever it is called? (I remember using it like 1 time in my life! lol)

584868495[/snapback]

"I have Norton antivirus 2005" - you answered your own question

about 50 secs for mine - would be less if I didn't have a password - reduced it quite a bit now since I have 0 icons in my systray for windows to worry about (also found that I have more system resources to play with due to this. It was a little disconcerting at first when I dont see McAfee/sygate protecting my computer, but once their popups came up I was happy :) )

and the whole Norton package is the most resource hungry program I've had on my machine and dont plan in EVER using it again.

how do you get it to such speeds as 12 seconds :huh:

that is just crazy!.. i want i want i want

mine takes about a minute or 2 to fully load :(

AMD 1600XP

1GB SDRAM

7200RPM 40GB HDD

Windows XP SP1

Is my system slugish for that kinda speed?

584592158[/snapback]

I'd have to say yes, as those specs are higher than 4 systems I'm currently playing with and none of them take a full minute. In fact, one of those systems in an ancient Packard Bell with XP Pro, SP2, and a meager 333mhz Cyrix cpu, 384MB memory, that doesn't take that long.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, While ~104 GB of space may seem generous (at least compared to other e-readers which have 8-32GB), I feel at this price point the device should have a Micro SDXC card slot for expansion, particularly if it allows audio books to be installed and played. I hope to see more reviews of 6" phone-sized e-readers on Neowin in the future. It will be interesting to see how they compare. Regards, Aryeh Goretsky
    • Sandboxie Plus 1.17.8 / Classic 5.72.8 by Razvan Serea Run programs in a sandbox to prevent malware from making permanent changes to your PC. Sandboxie allows you to run your browser, or any other program, so that all changes that result from the usage are kept in a sandbox environment, which can then be deleted later. Sandboxie is a sandbox-based isolation software for 32- and 64-bit Windows NT-based operating systems. It is being developed by David Xanatos since it became open source, before that it was developed by Sophos (which acquired it from Invincea, which acquired it earlier from the original author Ronen Tzur). It creates a sandbox-like isolated operating environment in which applications can be run or installed without permanently modifying the local or mapped drive. An isolated virtual environment allows controlled testing of untrusted programs and web surfing. Sandboxie is available in two flavors Plus and Classic. Both have the same core components, this means they have the same level of security and compatibility. What's different is the user interface the Plus build has a modern Qt based UI which supports all new features that have been added since the project went open source. The Classic build has the old no longer developed MFC based UI, hence it lacks support for modern features, these features can however still be used when manually configured in the Sandboxie.ini. Sandboxie Plus 1.17.8 / Classic 5.72.8 release notes: Added added DisableCustomTitleOpt=[process,][y|n] to allow [#] sandboxie title markers on custom-titlebar windows (Delphi VCL, Qt, Electron) that were previously skipped to prevent DWM repaint CPU loops #5387 Changed updated bundled ImDisk driver to 3.0.2 #5419 Fixed fix Suppress logs for expected non-user SIDs #5422 SbieSvc.exe: SBIE2218/2219 error when run program as administrator #5417 fixed explorer.exe crashes in Application Compartment when Huorong Security is installed #5423 Download: Sandboxie Plus (64-bit) | 23.5 MB (Open Source) Download: Sandboxie Classic (64-bit) | 3.0 MB Links: Sandboxie Website | GitHub | ARM64 | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
    • I still use HexChat! Not really as ancient as the 1994 AutoCAD above my post, but I have never found anything better to replace it. Yes we still operate an IRC server https://www.neowin.net/irc/ 😛 
    • At work we still have a couple of people that use a version of AutoCAD LT purchased in 1994. This predates Windows 95 and works fine on versions of Windows up to XP. Its long since run in an locked down isolated XP VM, accessible via RDP. I did install LibreCAD for them, however they said it was just too different to get to grips with. In all fairness one of them is now 75 and the other is almost 60.
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!