Recommended Posts

When my PC was brand new it took about 10-15 seconds to start; now though, i've got everything I need on it and its more like 25 seconds.

I think I may try the prefetch clear out thing, but I've also got that problem where it takes you about a minute to shut down.

:( :blink:

mine takes about 15-20 secs. 5secs for post and the dos stuff, then 15 to load windows + auto-logon. :D

Maxtor 80GB 7200RPM SATA, 1.67GHz Athlon XP, XP Pro SP1, 512MB PC2700 DDR Ram; slow i know, but upgrades comin sooooon :D

on a fresh install it can do it under 10secs. that shows how gd a fresh SATA drive is :D :D :D :D!!!!

First thing it takes 2 sec at dos post screen, then another 2 sec at blank screen before XP startup screen, 1 sec (barely 1 loop) at XP startup screen, then another 2 sec of blank screen before the windows classic logon, so about 7 sec to boot up entire windows not counting logon screen because I'm there the instant the desktop loads, but since I'm the only user of my own personal custom built PC and have autologon enabled, I would have to say it takes about 3 sec to reach the desktop. So if you add all that up, it takes about 10 sec to reach the desktop after I turn on my PC, I also have specs to my PC listed below as well, have a look if you want. :happy:

<u>My PC Specs:</u>

Windows XP Pro SP1

Biostar M7NCD v3.0 with nFORCE2 400

AMD Athlon 1.6 GHz

128MB system ram

40GB hard disk (3 partitions, 12.7GB each)

Sony CDX140E CD-RW drive

Gateway VX700 on NVIDIA GeForce2 MX400 AGP 64MB video card

Current Resolution: 1152x864 pixels with 32-bit color and 85Hz

Max Resolution: 1600x1200 pixels with 32-bit color and 60Hz

  • 1 month later...

I'm I the only one who keeps a log of his boot time??

my average for the past 25 days has been 42.3sec (from the second I push the button, until all apps have loaded and is 100% funtional)

used to be like 15 or so... but that was before I instaled the anti-vrius, firewall, Twak XP and SP2.

hey... as long as it's less that a min... it's ok.

Mine takes about 1 minute, from the time I push the button to start the computer and the time windows is fully operational.

How the hell do you guys get 20 seconds? I mean, I have a high-end desktop system, yet I get one minute to start it.

My system is : Athlon XP 3000+, ATI Radeon 9800 PRO, 512 MB RAM, Motherboard A7N8X-X, nForce2 chipset, 200 GB hard drive, about 2 USB devices.

I have Norton antivirus 2005, catalyst 4.10 w/ control panel and some other drivers.

Is there any way I could get a 30 seconds boot time with this? :unsure:

Or do you guys even shut down the PC, or you use the hibernate mode or whatever it is called? (I remember using it like 1 time in my life! lol)

Mine takes about 1 minute, from the time I push the button to start the computer and the time windows is fully operational.

How the hell do you guys get 20 seconds? I mean, I have a high-end desktop system, yet I get one minute to start it.

My system is : Athlon XP 3000+, ATI Radeon 9800 PRO, 512 MB RAM, Motherboard A7N8X-X, nForce2 chipset, 200 GB hard drive, about 2 USB devices.

I have Norton antivirus 2005, catalyst 4.10 w/ control panel and some other drivers.

Is there any way I could get a 30 seconds boot time with this? :unsure:

Or do you guys even shut down the PC, or you use the hibernate mode or whatever it is called? (I remember using it like 1 time in my life! lol)

584868495[/snapback]

"I have Norton antivirus 2005" - you answered your own question

about 50 secs for mine - would be less if I didn't have a password - reduced it quite a bit now since I have 0 icons in my systray for windows to worry about (also found that I have more system resources to play with due to this. It was a little disconcerting at first when I dont see McAfee/sygate protecting my computer, but once their popups came up I was happy :) )

and the whole Norton package is the most resource hungry program I've had on my machine and dont plan in EVER using it again.

how do you get it to such speeds as 12 seconds :huh:

that is just crazy!.. i want i want i want

mine takes about a minute or 2 to fully load :(

AMD 1600XP

1GB SDRAM

7200RPM 40GB HDD

Windows XP SP1

Is my system slugish for that kinda speed?

584592158[/snapback]

I'd have to say yes, as those specs are higher than 4 systems I'm currently playing with and none of them take a full minute. In fact, one of those systems in an ancient Packard Bell with XP Pro, SP2, and a meager 333mhz Cyrix cpu, 384MB memory, that doesn't take that long.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Linux 7.1 arrives with an NTFS overhaul and major hardware performance boosts by Paul Hill The founder of the Linux kernel has just announced the availability of Linux 7.1. This is a stable version of the kernel that will now be tested by various Linux distributions before it is shipped to users through update managers. Some users, like those on Debian, for example, might not get it for a long time, if at all, while Fedora users can expect it in the near future. With Linux 7.1 out on time, the merge window for Linux 7.2 is now open, giving contributors the opportunity to send in major new features that have been waiting for the last two months. Torvalds warned that he is currently travelling and will be in another timezone, so timing for the merge window may be irregular due to timezone differences and limited internet access. Torvalds said that he has already fetched early pull requests to allow him to do some offline work, but the travel could still cause disruption. Right now, he is not planning to extend the release, but did consider it. He said he might later regret not extending, though. In terms of this last week of development for Linux 7.1, Torvalds said there were no major or alarming changes. This week consisted mostly of smaller driver updates to GPU, networking, and sound, networking fixes, trace tooling fixes, and misc minor fixes. The shortlog this week lists fixes for driver bugs, memory leaks, I/O and USB fixes, networking and RDMA fixes, DRM/graphics fixes, and tooling and verification improvements. Specific fixes include USB series heap-overflow and buffer overflow fixes, and multiple use-after-free, memory-leak, and refcount corrections across subsystems such as i2c, zram, gpio, and net. There are fixes for graphics drivers, including amdgpu, i915, and virtio, as well as hypervisor and virtualization tweaks affecting mshv, vmbus, and hyperv. According to Phoronix, anyone running Linux 7.1 should look out for the new NTFS driver, Intel FRED for improved performance on Panther Lake and future CPUs, faster graphics with Intel Arc Battlemage, and improvements for older AMD Radeon GPUs. If you are running Linux on your computer and everything is fine, then you don’t need to worry about updating to Linux 7.1 as a priority; just wait for it to be pushed to you. If you have tried Linux on hardware but it didn’t work properly, trying again with a distro that uses Linux 7.1 could cause Linux to work on your machine, thanks to the new hardware support.
    • you can also do this with this tool: PowerSettingsExplorer made by mbk1969 at 3dguru forum.. I found it by accident researching on modern standby and annoying quirks of it in 2022
    • AB Download Manager 1.9.1 by Razvan Serea AB Download Manager is an open-source, feature-rich download manager designed to accelerate downloads, organize files efficiently, and provide seamless control over downloads. With support for multiple connections, resume capability, and an intuitive interface, it enhances the downloading experience for users seeking speed and reliability. The software integrates with various browsers, enabling quick link grabbing and batch downloading. It supports HTTP, HTTPS, and FTP protocols, ensuring broad compatibility with different file sources. Users can schedule downloads, set speed limits, and categorize files automatically for better organization. AB Download Manager is lightweight yet powerful, making it a great alternative to proprietary download managers. Its open-source nature allows developers to contribute, customize, and improve the software as needed. Whether you're downloading large files, managing multiple downloads at once, or seeking an ad-free experience, this tool offers a practical and efficient solution. Key features of AB Download Manager: Multi-Connection Support – Accelerates downloads by splitting files into multiple segments. Resume Capability – Allows paused or interrupted downloads to be resumed without starting over. Batch Downloading – Supports downloading multiple files at once for improved efficiency. Browser Integration – Captures download links directly from browsers for seamless operation. HTTP, HTTPS, and FTP Support – Ensures compatibility with a wide range of file sources. Download Scheduling – Enables users to automate downloads at specific times. Speed Limiting – Lets users control bandwidth usage for optimized performance. File Categorization – Automatically organizes downloaded files into designated folders. User-Friendly Interface – Simple and intuitive design for easy navigation. Cross-Platform Compatibility – Works on multiple operating systems. Ad-Free Experience – No intrusive ads or tracking for a clean user experience. AB Download Manager 1.9.1 changelog: Added An option to customize notification sounds (#1259) Fixed Ongoing notification was laggy on Samsung One UI devices (#1269) Improved Updated Translations Minor UI/UX improvements Download: AB Download Manager 1.9.1 | Portable | ~80.0 MB (Open Source) Download: ARM64 | Portable ARM64 | Android Links: AB Download Manager Website | Github Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • watching him because of the Mr Klinton cat
    • yup dude, ADS on this website are terrible
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      140
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!