[Review] Logitech z-5500


Recommended Posts

I bought these speakers awhile ago based on this review but I've been somewhat disapointed. They simply dont get that load and they've only been a minor improvment from my z-640's. I have it connected as direct input and I've noticed some of you go through the optical and coaxical connection. Which is better? I have a audigy 2 zs platinum pro.

Just ordered from newegg, 268$ thats almost 160$ - the retail bestbuy or circuity value of 399$.

Overnight baby! 50$ which is little less then half tax, so I end up paying 100$ still less then retail value(+tax). Will let you know tommarrow if I get speaker wire connections.

Just ordered from newegg, 268$ thats almost 160$ - the retail bestbuy or circuity value of 399$.

Overnight baby! 50$ which is little less then half tax, so I end up paying 100$ still less then retail value(+tax).  Will let you know tommarrow if I get speaker wire connections.

586196522[/snapback]

A little while ago Dell had them for $215 and free shipping (dell shipping gets them to you in about 2-3 days)

What is the 96-24 thing in the right hand corner on the control pod ? I duuno what its there for :(

586197155[/snapback]

notice its also next to the DTS symbol below the the power button?

its basicly saying it can decode "96KHz 24-Bit DTS Audio Streams"

Speaker wire would be better then a single cheap rca cable, but I would't recommend using the wire that they provide its almost as thin as paper. I got mine setup. Got games going to the 6-channel direct and movies using a digital out on my augidy 2 zs soo much power. Can definality tell the difference between the z-5300. Theres no channel bleeding and its crystal clear.

Hi guys, I am new to Neowin.net. I just purchased the logitech z 5500 and the soundblaster 2zs audigy and i am having problem with configurating it. I have followed the necessary steps from the logitech website and updated all the drivers and applications available from creative lab website. I also disabled the decorder from the soundcard by checking "SPDIF Passthrough (dolby digital/DTS out)" at the devide control. Under the Surroundsound mixer, i selected 5.1 speakers, "synchronize with control panel", and "digital output only". restarted computer and I still cant hear the center, rear left/right and sub. The only speakers i can hear are the front left and right. I tried using the optical and coax using the 1/8 jack, still the same problem. I called creative and they said that's normal, so i tried with powerDVD and play a movie, the sounds came out to be very soft, even at higher volume. Can anyone tell me what else i can do or what did i do wrong? thanks.

Hi guys, I am new to Neowin.net. I just purchased the logitech z 5500 and the soundblaster 2zs audigy and i am having problem with configurating it. I have followed the necessary steps from the logitech website and updated all the drivers and applications available from creative lab website. I also disabled the decorder from the soundcard by checking "SPDIF Passthrough (dolby digital/DTS out)" at the devide control. Under the Surroundsound mixer, i selected 5.1 speakers,  "synchronize with control panel", and "digital output only". restarted computer and I still cant hear the center, rear left/right and sub. The only speakers i can hear are the front left and right. I tried using the optical and coax using the 1/8 jack, still the same problem.  I called creative and they said that's normal, so i tried with powerDVD and play a movie, the sounds came out to be very soft, even at higher volume.  Can anyone tell me what else i can do or what did i do wrong? thanks.

586208377[/snapback]

optical on audigy cards is crapola, cant do DTS. Anything that wasnt encoded in dolby digital in the first place is going to be stereo (mp3s, games, basically 99% of sounds coming out of your PC). However, your dvds should be playing in full 5.1 (considering theyre encoded in dolby digital), you sure your dvd software isnt just on low volume or anything?

optical on audigy cards is crapola, cant do DTS. Anything that wasnt encoded in dolby digital in the first place is going to be stereo (mp3s, games, basically 99% of sounds coming out of your PC). However, your dvds should be playing in full 5.1 (considering theyre encoded in dolby digital), you sure your dvd software isnt just on low volume or anything?

586210106[/snapback]

Well, i am using PowerDVD5. At the configuration of the PowerDVD, i set the audio to use Use SPDIF and i am not getting signal from the pod. So, i switched back to 2 speakers, i am able to hear the sound, but it's very soft, not loud at all. Moreover, i am getting lots of destortion from the speakers. They are giving this hiisssssssssss noice, kinda annoying. Anyone has anyidea what i did wrong? i went to creative lab and tested with several drivers already and it still giving me the same result. And i also have to crank up the volume to get the manageable sound to hear. This is very unsuall for a end high speakers like this. One more thing, during the movie playing, i switched from analogue to coax, the sound between the two are the same. I also went to AudioHQ and clicked the decoder options to Use Installed Decoder and switching back to SPDIF Passthrough, the sounds are also the same. I cant get the driver to work right.

Edited by acvien

I might pick up one of these to match my 2005fpw, I am curious whats the best to hook em up to my onboard sound (dfi lan party ut nf4 - D.) I don't want to buy a new soundcard and might get the creative x-fi a while after it comes out when the price drops if I don't get it when it's released, not too sure though.

Whats the differenec in sound depending on the way you hook it up? What about just regular hook-up?

I'll need your help later setting em up in my room, I got a 4.1 jbl speaker system now and 4 speakers on my dsek moving around in all sorts of directions, it's really terrible but I dunno, lol.

I just ordered a set of these from Dell for $214

Order detail - order placed 2005-07-19 05:49:29

Z-5500 Digital Speaker System Qty: 1

Unit Price: $299.00

Dell Home Customers: Save 20% off Desktop and Notebook Accessories!

Expires on 2005-08-01 04:59:59 - $59.80

ADDITIONAL DISCOUNTS AND COUPONS

Get free ground (3-5 day) shipping on peripheral items over $49!

Expires on 2005-07-21 10:59:59 - $45.00

Dell Home Customers: Save $25 off orders over $150!

Expires on 2005-08-01 04:59:59 - $25.00

.

Sub-Total $214.20

Shipping Discount -$45.00

Shipping and Handling $0.00

Tax $16.60

Total $230.80

Stupid TAX! hehe

I'm going to be happy with 'em? Annnnd I should get the speaker wire ones right?!?! :)

I just ordered a set of these from Dell for $214

Stupid TAX! hehe

I'm going to be happy with 'em? Annnnd I should get the speaker wire ones right?!?! :)

586239034[/snapback]

well it isn't as bad as the 14 sometimes 15% tax up in the rest of Canada

yay for Alberta :happy:

but yes, you should

I have just read throug roughly 80% of the posts for this topic. Its time for my 2 cents. I bought the Z-680's last year at circuit city. I have been very happy with them since. Currently, I am running a Coax cable from my Asus mobo the control pod and an rca cable that I use to connect my portable cd player from time to time. Like I said I am very satisfied with this kickass speaker system except for 1 minor thing. The control pods metal stand has an akward angle that makes the display very difficult to read. no biggie though as I will be bending the stand to make the control pod more upright. also these speakers look sweet with my newly arrived Dell 2405FPW. maybe i will get some pics up soon...................as soon as i get my hands on a camara!

I have just read throug roughly 80% of the posts for this topic.  Its time for my 2 cents.  I bought the Z-680's last year at circuit city.  I have been very happy with them since.  Currently, I am running a Coax cable from my Asus mobo the control pod and an rca cable that I use to connect my portable cd player from time to time.  Like I said I am very satisfied with this kickass speaker system except for 1 minor thing.  The control pods metal stand has an akward angle that makes the display very difficult to read.  no biggie though as I will be bending the stand to make the control pod more upright. also these speakers look sweet with my newly arrived Dell 2405FPW.  maybe i will get some pics up soon...................as soon as i get my hands on a camara!

586268883[/snapback]

I upgraded from Z680's to Z5500's and can tell you the viewing angel is much better on the Z5500 pod and doesnt have that annoying bright blue display , also the z5500's volume knob responds instantly when turning it even if you turn it really fast up or down , response time was a bit lagged on Z680's , but other than this the only real differance is the improved bass response on the z5500's 10" Sub,however the sub is still a bit muddy/sloppy sounding compared to a decent home theater setup but for the price i cant really complain. :D

I upgraded from Z680's to Z5500's and can tell you the viewing angel is much better on the Z5500 pod and doesnt have that annoying bright blue display , also the z5500's volume knob responds instantly when turning it even if you turn it really fast up or down , response time was a bit lagged on Z680's , but other than this the only real differance is the improved bass response on the z5500's 10" Sub,however the sub is still a bit muddy/sloppy sounding compared to a decent home theater setup but for the price i cant really complain.  :D

586271425[/snapback]

hit the nail on the head

the volume knob obliterates the piece of garbage on the z680s, and the LEDs on the control unit doesnt blind you if you arent looking at it from the exact coordinates.

GO ME! Enjoy!

Logitech Z-5500 Review

Review Homepage: DAn's Webpage

Introduction:

Ever want speakers that can pound and supply quality sound that won?t break your bank?? I think you may have found them.? I like to call these speakers the Klipsch Killer.

Price: $390 CAD

Inside the Box:

4 x Satellite Speakers

Center Channel

Subwoofer

Digital Control Center

Wireless Remote and Batteries

6-Channel Direct Cables

Instruction Booklet

Set Up Guide

About the Speakers:

- 5.1 Surround Sound

- Dolby Digital 5.1 Decoder

- Dolby Pro-Logic II

- DTS 96/24 ? This means it can decode 96KHz 24-Bit DTS Audio Streams.

- THX Certified ? This is not a decoder if you may have thought it was.? THX certification means it meets THX sound standards. (Basically this means these things can pound)

- Aluminium 3? Drivers

- 10? 188w Subwoofer

- 505w RMS

- 1010w Peak

Set-Up

Setting the speakers up was a breeze.? Just put them where they are labelled on the back of the speaker and plug the cable into the correct coloured spot.

Configuring wasn?t the easiest part of these speakers, that?s for sure.? People new to audio may have some trouble configuring these speakers.? To set these up to my SB Audigy 2 Platinum I had to first plug a RCA ? Mini Jack Y splitter into the Digital Out and plug the White RCA cable into the Coax In on the Digital Control Center.? I now had to select digital out in speaker settings and 5.1 Configuration.? That?s not all, I now had to go into the Creative AudioHQ and select external decoder.? Now when a digital source comes up, the decoder will detect it and start playing that sweet sweet digital sound.

The Tests:

For the following tests I used the following PC

Intel Pentium 4 2.40B GHz

512MB DDR RAM

SoundBlaster Audigy 2 Platinum

ATI Radeon 9800 Pro

36.7GB Raptor 10K RPM SATA

80GB Maxtor HDD

Pioneer DVR-108

8x Lite-On DVD-ROM

Logitech z-5500 Speakers (Duh!)

The first test, a movie!

The movie I chose was 2 Fast 2 Furious. The Player I used was PowerDVD 5

Immediately the speakers detected a digital source and the encoder started playing the digital 5.1 track.?? That sound was crisp, sharp and sounded amazing.? The car engines sounded realistic and the bass was perfect. No gross uneven rumble.? Just clean clear thunderous bass.

Test 2:? Unreal Tournament 2004

I failed to get the Dolby Digital to encode through the Digital Control Center but this may be a user error.? I switched from Coax to Direct input and my Audigy 2 did the Dolby encoding.? It sounded like I was in a real gun fun.? Great sound and great graphics can rally make it feel like your in the game.? I played for 30 min and was very pumped after this.? I have never felt this kind of excitement from a game before.? It was just so much more fun.

Test 3: Call of Duty

24-Bit never sounded so sweet.? The bullets hurling by you makes you feel as if you were in World War 2.? Maybe I should show my grandpa this?? Maybe not, it may scare him or make him tell me and old war story.? Anyways back to the speakers.? The bullets whirling past you and the explosions going off sending the sub to pound.? These speakers really rock.

Test 4: Music

The Logitech z-680s were not very good for music and whether the owners will agree or not is up to them but it?s the truth.? These speakers completely change that.? Music sounds great!? The satellites can really make music sound amazing.

Test 5: DJ Mikes Bass Test

This was a very interesting experience for me.? My entire CD collection fell to the ground; my trophies fell of the shelf the Control Center tried to run away.? Basically the sub pounds away so hard that you cant talk anymore.? This is not yucky bass either.? It?s strong but clean bass.? Something you get from Klipsch only louder and stronger.? These reach really low frequencies.

Conclusion:

Klipsch, you have just been pwn3d.? These speakers provide very clear sound combined with strong bass.? It?s hard to beat that.

These Speakers rightful get 10/10

Kick Ass Product Logitech, keep up the great work!

584723843[/snapback]

post-21093-1097640899.jpg

this is a big quote i know, sorry about that but you know what, your review looks great and everything, nice layout, nice pricing info but one thing is the pictures, everything looks nice in their except that your CRT MONI:DR doesn't match with this speaker setup!!! :D lol... I meant nothing bad, just trying to entertain here :-)

Hi, there.

I've just registered cause I've found this GREAT forum searching for some answers for my Z5500 using google.

I've seen reading these pages that other members have the same problem that I have, my hope is that someone with this set of speakers could do some tests just to make sure I've to RMA the product. I've contacted Logitech support and they have not been much of a help...

I have two main problems:

1.- And most annoying is the low tone frecuency that I hear every time the control pod is ON. It doesn't matter if the volume is set low or high or the input I use... the tone is constant, slight and put me on my nerves. I can hear it perfectly in movie scenes with complete silence, even at 2 meters from the subwoofer!!... :pinch:

This problem doesn?t happen with the satellites, they stay in complete silence, and (this is just for curiosity) doesn't happen when the headphones are attached to the headphone adapter.

My setup is 60 cm min far away from other electronic or magnetic device.

2.- This is also very annoying (can give you chills if you are listening classical music) but I can live with it till I get a better setup... I mean... house :pp

Everytime someone turns on something with a power consumption of 100W or higher I hear a clear "tap" coming from one or more than one of the speakers/sub... the tap is most times slight, but sometimes is a little loud...

This gets even better when I have the same problem if my neighbours turn on the light in their homes.... or in the hall ... weird :huh::

I thought a set like these speakers should come with some sort of protection against this "electrical anomalies" (they are THX certified :cry:: )

So... this far, thanks for reading this whole crap (and thanks for doing it because english is not my mother tongue and I'll make huge mistakes).

If someone could do some tests and tell me if they can hear the hiss from the subwoofer (is more a low tone than a hiss, something like a... fan :wacko:: ) and if he can turn on the lights without the taps... I need more backup with this problem, I'll be eternaly grateful.

Thanks in advance, and congratulations for this great forum and this GREAT review (made me bought the speaker set :yes:: )

See ya

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I have never been a huge fan of libre, it feels really good but exactly when you need an advance feature for data wrangling it falls short every time or has bugs. I am all for euro office if they can deliver a good and usable alternative to MS office with backing of govt function.
    • Go on, I'll bite. How does windows (nice comment on an 'article' which doesn't actually involve it ) lock users out of their data then? Been using it since 3.1 back in 92 and not once have I been locked out of my data? Perhaps you mean Bitlocker? In which case the average user (who doesn't mess about) will have been forced to use a MSA, and in which case the recovery key would have been saved to said account..... If the user did happen to bodge around and not use an MSA then Bitlocker wouldn't have become live (as it cannot without a safe place to store the key) I want to point out Bitlocker and MSA are not connected and you can of course force it on without a safe place to store the key, but you do that with your eyes open. So your standard consumer who knows no better sets up an MSA, gets bitlocker and a recovery key stored off box, with a route to reset their password. All of this notwithstanding the fact, if your data is important, you back it up, no ifs, no buts, no-ones responsibility other than your own. Important data lives in at least two locations, one of which is offline and recovery is tested, otherwise that data wasn't really that important. Disks, fail, laptops get lost, phones end up down the toilet, tablets get stolen, if your only copy of data is on a single device you're doing it wrong.
    • Clearly that feature isn't for us. It's for the ad spam marketers so they can more directly target us about going to places we might want to go again...but without understanding context clues. Like for the flight someone took for a friend's funeral. We want to be reminded of that every time we open an app, a browser, or email, right? Right, Siri?
    • Is your Apple Watch supported? Check the watchOS 27 compatibility list by Aditya Tiwari Apple kicked off WWDC 2026 with a ton of announcements, mostly centered around Apple Intelligence improvements, the Siri AI, and Liquid Glass updates. However, there is a lot of other stuff that couldn't catch the limelight. Let's talk about watchOS 27 and which models are supported by the newest operating system. According to the Cupertino giant, watchOS 27 will be supported on the following Apple Watch models when it arrives later this year: Apple Watch Ultra 3 Apple Watch Series 11 Apple Watch SE 3 Apple Watch Series 10 Apple Watch Ultra 2 It's a stark contrast with last year's watchOS 26 update, which had almost a dozen Apple Watch models in its list of supported devices. Apple supported models all the way back to Apple Watch Series 6. That said, if you own one of the five models, you'll need an iPhone 11 (or later) with iOS 27 to install the latest update. Yes, Apple has shown some extra love to the iPhone 11, and it old horse supports the iOS 27 update. watchOS 27 beta 1 is now available for developers and interested power users through the Apple Developer Program. So, if you're among those who like to play with fire, you can download it to your supported Apple Watch. Otherwise, the public beta for watchOS 27 will be available next month. The freshly baked Apple Watch update comes with Siri AI - an advanced, fully conversational version of Siri powered by Apple Intelligence due for later this year. A new dynamic app grid features icons for five Siri-suggested apps. You can use a new tap gesture to open a widget in the Smart Stack, and a new Find My app finally clears the mess of Find Devices, Find Items, and Find People on Apple Watch. Workout Buddy can run without an iPhone nearby and offers new insights based on data, including your progress for pace, distance, and workout duration. Apple improved its motion tracking algorithms to measure the distance of indoor treadmill runs and walks more precisely. Speaking of other changes, the music playback on watchOS 27 starts faster and you can create custom passes for any membership or card that uses a QR code or barcode, then easily access them in the Wallet app or pin in the Smart Stack.
    • "and pull old flight details from your email during back-and-forth conversations" The Siri I've become to know and trust. I've always wanted to pull info on old flights. /s
  • Recent Achievements

    • Very Popular
      Captain_Eric earned a badge
      Very Popular
    • One Month Later
      amusc earned a badge
      One Month Later
    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      PsYcHoKiLLa
      228
    3. 3
      ATLien_0
      85
    4. 4
      Steven P.
      76
    5. 5
      +Edouard
      75
  • Tell a friend

    Love Neowin? Tell a friend!