What do you drive?


Recommended Posts

found specs to my: Refer to my last useful thread for description of my car.

I am basing my specs here on http://www.autotrader.com.

It has a 190HP Standard engine, my GXE Model is at the bottom of the Nissan Maxima Lineup followed by a GLE then SE (in ascending order). I have DOHC, 190hp @ 5600 RPM, 205 ft-lbs @ 4000 RPM. According to another site, the SE Model can do 0-60 in lless than 7seconds my guesstimation for my GXE is less than 30seconds :rofl:

And DUDE, Ford doesn't sell Ebony exterior autoMobiles; I went on their website! Dont you hate me!

Jus yankin' your chain NEWayz =P

Just jealous you got a faster car than ME... duh!

1992 Ford Taurus GL

3.0L V6

0-60/Quarter

11/18

First got it, the radiator leaked. Got it replaced, the second radiator was crap; leaked even more. Got a third one in, it was fine until one morning before school, it leaked all over. Last, and hopefully final radiator just recently put in, working fine. Got to drive it for two days before another problem occurred, this time the starter died.

I keep the interior well cleaned since I'm a clean freak, but I don't really bother about the outside. Nothing really fancy, no expensive sound system, nothing. Just a JVC deck and a pair of Audiobahn 6x9's.

Might add pictures if I get around to it.

It's funny to have imports and Mustangs try and screw with me at stoplights.

While mine isn't the fastest car on the streets, I still manage to **** off ricers. Which is fun; I hate seeing white people driving those ugly things around.

While mine isn't the fastest car on the streets, I still manage to **** off ricers. Which is fun; I hate seeing white people driving those ugly things around.

585291301[/snapback]

I hate same thing you do. So do you really get 11/18 mpg? And i'm presuming you live in Kansas City, right? Because in the regular rural Kansas i'm more familiar with from House on the Prairie; That's a joke. I would see a problem with only 11/18 mpg. Unless you're taking into account the age of the vehicle, I would have to agree with the results i'm getting from AutoTrader that it was your misprint, and you meant 20/29 mpg.

I own a 1959 ford failane Back in Sacramento but it need a new engin and suspension kit. It's been in my mom's garage for a long time handed down to me from my Dad this is not the exact car mine is a blue 2 door hard top

145-4516_IMG.JPG

Can't wait to get it restored :cry:

And this is a 92 eldorado which i had to sell when i moved up here to seattle, because there was no way i was gonna be driving it i work one block away from my apt and dont ever leave the downtown area except to go snowbaording.

again this is just a pic not the exact one i owned

009.jpg

im gonna buy another one this year when i move back to AZ

my saying: If it aint chroming it aint rolling

1992 Corrado G60 in Pearl Green

Number of modifications including full ride & damper adjustable Koni suspension, supercharger ported and pullied, SNS chip, magnex exhaust with supersprint catalytic converter bypass, and various other tweaks. Takes the BHP up from 160 to around 207BHP with 187lb/ft of torque. Not a lot compared to some cars out there, but enough to catch out a lot of other more expensive / modern motors :)

Only have a few pics with it on new wheels.. mine is the green one.

P1010025.JPG

shiny2.jpg

* 1991/Nissan/240sx

* Specifications : HorsePower 155 @ 5,600 r.p.m.

Torque: 160 @ 4,400 r.p.m.

Engine Size: DOHC KA24DE 2.4 L Inline 4

* History : My brother and I both got one of these cars his was white my is black He dropped an SR20DET and put about 10 grand into his car. had about 300hp to the wheel. It recently for unknown reasons caught on fire and the fire department didn't try to spare his car any pain they used the jaws of life on his hood and when they got it open the flung it back smash his windshield in and cut his front bumper in half. Ill try and get a picture of his car so you can see what they did to it. Mine on the other hand I only paid 1500 dollars for because my step dad is friends with a used car dealer he sold it to me at cost to him. runs perfect and Im extremely happy with it. Not to mention it looks (and is alot more rare) better then a civic and blows most of them away except the minime and frankenstien ones. if you own a civic like that you know what I'm talking about. MY CAR STILL HANDLES BETTER THEN YOURS!!

This would be my car when I very first bought it. Its at my shop being inspected. all it needed was a water pump or something I can't remember.

46797360_l.jpg

1996 200sx s14 in Marlin blue.  :D

Been raining ever since i got it so no chance of any decent photos yet...

DAMM YOU UK WEATHER.... :angry:

585291615[/snapback]

about the first week I had my 240sx it rained non-stop. you guys are lucky you dont have to deal with our crappy emissions laws I hate how we have to import the engine that was made for our cars instead of just having them in there already.

I hate same thing you do. So do you really get 11/18 mpg? And i'm presuming you live in Kansas City, right? Because in the regular rural Kansas i'm more familiar with from House on the Prairie; That's a joke. I would see a problem with only 11/18 mpg. Unless you're taking into account the age of the vehicle,  I would have to agree with the results i'm getting from AutoTrader that it was your misprint, and you meant 20/29 mpg.

585291318[/snapback]

I was referring to the 0-60 time and the 1/4 mile time. :p

I live in Wichita, Kansas, which is a bit smaller than the whole of Kansas City.

What is the matter with people, no one drives a truck anymore?!?!

02 Chevy Avalanche, 5.3 V8

not built for fast but can pull just about anything

3 TV's, XBOX, DVD, Sat Radio, TV Tuner

585294420[/snapback]

If I could afford an Avalanche, I'd have one. That being said, I envy you. :D

Though mine would have to be the "Without Body Hardware" version.

1993 Geo Prizm LSi 5 SPD Manual (~133,417 miles, ~214,714 km)

Dimensions

Wheelbase: 97.08 in

Track Front: 57.51 in

Track Rear: 56.49 in

Length: 172.59 in

Width: 66.29 in

Ground Clearance: 4.68 in

Weight: 2358.94 lb

Weight Distribution F/R: 60 %

Fuel Capacity: 13.2 Gallons

Engine Specifications

Manufacturer: Toyota

Type: S-4

SOHC, 16 valves total

Bore x Stroke: 3.19 inches ? 3.37 inchesBore / Stroke ratio:> 0.95Displacement:> 1.8L, 1764 cc Compression:> 9.50:1Aspiration:> NormalCatalytic Converter:> YesMaximum Output:> 115 HP @ 5600 RPMMaximum Torque:> 115 lb ft @ 4800 RPMCoolant:> Water

Performance>

0 - 60mph:> 8.8 secondsQuarter mile:> 16.90 secondsTop speed:> 117 mph

Chasis>

Engine location:> FrontEngine Alignment:> TransverseTurning circle:> 31.5 ftTransmission:> 5 Speed ManualDrive:> FWDTop gear ratio:> 0.81Final drive ratio:> 3.05

All of the information was taken from this site

Pictures>

1.jpg

2.jpg

FrontSeat.jpg

(These pictures were taken in the spring by the way.)

Basically this is my first car. It was given to me by my dad in the summer when I got my license (07/17/2004). It runs great, it's in very good condition, and the fuel economy is really good. My dad had many options, he could have sold it, traded it in for cash towards his new car (2004 Malibu LT), but he gave it to me, and I am very thankful for that.

Just to give you guys an idea about the fuel economy, I've recorded some data in an excel table:

Fuel Economy>

stats.jpg

Now you may be wondering, "Why is the price of gasoline so high?"

(Also the reason for my last MPG being so low is that I kind of shifted harder a few times at 5,000 RPMs, just to see what would happen. Plus driving short distances before the engine can warm up, driving up hills, and driving in the winter doesn't help one bit.)

gas.jpg

The engine in this specific Prizm model (LSi) takes 91 or greater. I didn't think you would believe me if I told you straight up, so I provided a picture. Well it would make sense since the compression ratio is 9.50.1; higher octane would be needed.

Octane>

The octane rating of gasoline tells you how much the fuel can be compressed before it spontaneously ignites. When gas ignites by compression rather than because of the spark from the spark plug, it causes knocking in the engine. Knocking can damage an engine, so it is not something you want to have happening. Lower-octane gas (like "regular" 87-octane gasoline) can handle the least amount of compression before igniting.

The compression ratio of your engine determines the octane rating of the gas you must use in the car. One way to increase the horsepower of an engine of a given displacement is to increase its compression ratio. So a "high-performance engine" has a higher compression ratio and requires higher-octane fuel. The advantage of a high compression ratio is that it gives your engine a higher horsepower rating for a given engine weight -- that is what makes the engine "high performance." The disadvantage is that the gasoline for your engine costs more HowStuffWorks

Sorry I was bored. Four day weekend . . .

Edited by Louisville Slugger

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Camtasia 2026.1.3 by Razvan Serea TechSmith Camtasia is the complete professional solution for high-quality screen recording, video editing and sharing. Camtasia 2026 makes editing your videos easier, and faster than ever. The new editor is packed with enhanced video processing, all-new production technology, an innovative library, and stock videos and other creative assets to help you create more polished, professional videos. No video experience needed. Anyone can create informative, engaging videos. Create professional, eye-catching videos: Add special video effects - Apply Behaviors that are perfectly designed to animate your text, images, or icons. Get a crisp, polished look without being a professional video editor. Drag-and-drop your edits - What you see is what you get. Every effect and element in your video can be dropped and edited directly in the preview window. And you can edit at resolutions up to beautiful 4K, for clear video at any size. Get exceptional performance - Camtasia takes full advantage of your computer’s processor with 64-bit performance. You’ll get fast rendering times and enhanced stability—even on your most complex projects. Camtasia 2026.1.3 changelog: Feature Updates Improved keyboard navigability in tool panels. Improved screen reader accessibility of headings in Preferences. Tool panels can now be resized using a keyboard-navigable control. Updated color of folder icon in User Library tab for better visibility. Grouped media now render a composite waveform considering all audio media within that group. Added Long Path Aware to the manifest of Editor and Recorder. Performance Improvements Improved performance for editing groups on the timeline. Improved the project loading performance when timeline has lots of trec media with cursor data. Updates for IT Administrators Updated cpp-httplib from 0.38.0 to 0.43.3. Updated expat from 2.7.4 to 2.8.0. Updated freetype from 2.13.3 to 2.14.3. Updated harfbuzz from 13.0.1 to 14.2.0. Updated libpng16 from 1.6.55 to 1.6.58. Updated pango from 1.57.0 to 1.57.1. Updated girepository from 2.86.3 to 2.88.0. Updated pcre2-posix from 10.47.0 to 12.0.2. Added new harfbuzz-gpu.dll. Updated FFmpeg from 7.1.1 to 7.1.2. Updated aom from 3.11.0 to 3.13.1. Updated dav1d from 1.5.0 to 1.5.1. Updated ogg from 1.3.5 to 1.3.6. Updated SDL2 from 2.32.4 to 2.32.10. Updated zlib from 1.3.1 to 1.3.2. Updated Nalpeiron binaries to version 4.4.69.3. Bug Fixes Fixed an issue which prevented some user submitted crash reports from being sent. Fixed a potential memory leak when decoding HEVC or VP9 video. Fixed a potential crash when trying to delete a range selection on a magnetic track. Fixed a bug with the Properties Panel showing stale properties when only a caption is selected on the timeline. Fixed an issue that could prevent the Opacity and Blur properties from being changed in the Background Removal effect. Fixed an issue where larger Camtasia online projects may fail to open in Camtasia Editor. Table of contents thumbnails are no longer created for Smart Player exports with no table of contents. Fix resetting skew revert to revert just skew and not scale as well. Fixed editing in Snagit with snagX file with Unicode characters. Fixed a bug where grouped visual media could be cropped in some cases. Fixed importing SnagX files with Unicode characters. Localization fixes. Download: Camtasia 2026.1.3 | 309.0 MB (Shareware) View: Camtasia Homepage | Tutorials | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • yeah it seems to be Edge only. The dialog buttons work as expected in Chrome and Firefox. The phone is using Android 16 (OneUI 8.5) and Edge version  149.0.4022.53
    • I'm not aware of this issue, but to help the other guys.  What version of Android are you using? Did you try a different browser? To see if Edge is the issue here.
    • I agree when are you going to read this (really poor BTW) article? Here is a better article so you actually know what is going on and answers questions you had in other comments --> https://arstechnica.com/gadgets/2026/05/speed-boosting-low-latency-profile-is-one-of-the-improvements-coming-to-windows-11/ It is unclear if one will be able to disable the new profile at this point but I am not seeing any reason why one would.
  • Recent Achievements

    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
    • One Year In
      slackerzz earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      512
    2. 2
      PsYcHoKiLLa
      188
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!