Your First Car


Recommended Posts

How stupid of you. Since when Mustang drivers are <Snipped>? Care to explain your wisdom on the subject?

Since my first car back in 1996 was a Chevrolet Cavalier Z24, I guess your first car is pretty hot! Nice Mustang at 18.

Thanks man. I've waited 2 years to get my license (only on a learners permit still) and to get a car. It sucks being 18 and still having to rely on your mom to take you places. Once I get this car I'll finally get my real license and get a job to pay for it.

Edited by Anaron

<span style='font-size:14pt;line-height:100%'>What was the first car you ever driven?</span>

My first car

Black Nissan Pulsar 1984

pros

Cheap on Gas

Small and mobile

Fast

cons

Had to replace the boots, muffler, brake pads, tires

No A/C

Current Status

Long gone, have a 98 Mazda 626 V6 LX, Runs great to this day, low milage.

How stupid of you. Since when Mustang drivers are <Snipped>? Care to explain your wisdom on the subject?
Have you seen the majority (like 95%+) of mustang drivers? They are all <Snipped> types. I wasnt calling that guy a <Snipped>. I like the car (well older models), but I hate the drivers...and not jealous or anything Edited by Anaron
Have you seen the majority (like 95%+) of mustang drivers? They are all <Snipped>g types. I wasnt calling that guy a <Snipped>. I like the car (well older models), but I hate the drivers...and not jealous or anything

I'm just going to say this: Almost all drivers are <Snipped>, they all believe they own the road. I'm not just saying this because I'm an owner of a Mustang. I'm saying that since it speaks the truth. I guess I should call all BMW drivers <Snipped> too because of that. See my point?

Edited by Anaron
  • 1 month later...

I bought a 1972 Datsun 510 new for $2700 when I got out of college. It was a great car, AKA "poor man's BMW". In 1981 I replaced the original 1.6L engine with the Datsun/Nissan L18 SSS 1.8L sport engine. That came with dual SU carbs like the 240Z. I had a custom cam made, shaved the head to raise the c/r, ported the intakes, and added a water-alcohol injection system from Edelbrock. That thing would kick.

I found a fuel injection intake manifold, but I never got around to rigging it up. I sold the car for $1000 in 1990 to a kid who wanted to restore it. I still miss it.

  • 1 month later...

My first car is a 1998 Citroen Saxo SX 1.1i in Cherry Red

Pros:

Pretty good fuel efficiency

Its the SX so it has electric windows and central locking

Cons:

Head gasket is a bit leaky

93k miles

Could be faster

THAT BLOODY IMMOBILISER!

Mods:

Aftermarket radio

Amp + Sub

I still haven't got a car yet, but it looks like the first car I'll have driven will be a 2009 (59) Citroen C3 Picasso.

Citroen-C3_Picasso_2009_800x600_wallpaper_04.jpg

It's our new family car (we got it last Tuesday), and my dad's already given it a good runaround. He's already done about 500 miles in it so far, mostly due to taking me up to Thorpe Park for the Need for Speed Shift UK Finals. Did about 400 miles just from Friday and Saturday. :p

I still haven't got a car yet, but it looks like the first car I'll have driven will be a 2009 (59) Citroen C3 Picasso.

Citroen-C3_Picasso_2009_800x600_wallpaper_04.jpg

It's our new family car (we got it last Tuesday), and my dad's already given it a good runaround. He's already done about 500 miles in it so far, mostly due to taking me up to Thorpe Park for the Need for Speed Shift UK Finals. Did about 400 miles just from Friday and Saturday. :p

you should remove the pic...

I wasnt paying attention at first and relized that was a corvette lol

you should remove the pic...

I wasnt paying attention at first and relized that was a corvette lol

FFS. When I first posted it, it came up fine.

And worst of all, I can't edit the original post. OK, I'll upload the pic:

post-151617-1254625039_thumb.jpg

1994 Jeep Grand Cherokee

Bought it for $2900 in 2004, peeling tint and balding tires. 112,000 miles.

Drove for 3 years. I put a few listings up around on autotrader and ebay and right after it didn't sell the first round, i got dominated at a stoplight.

Not at my own fault, but we lost money on the insurance. KBB valued the car with 155,000 miles for $1900, I had it listed for $3999(~140,000 miles).

Anyway, i got a 1997 Toyota Tacoma V6 manual 5spd 4WD for a few years, then sold it for $7000 (bought for $4200) and now i'm rolling in a 2005 Honda Civic EX coupe($12,000 - 33,000 miles). next car is definitely going to be 2009 honda accord, i'm a junior at university now so hopefully once i graduate.

post-46003-1254876933_thumb.jpg

  • 1 month later...
  • 3 weeks later...

I bought a 1991 Subaru Liberty GX, auto, ($3000) but the second time I took it out we heard a rattling noise coming from under the car, turned out the oil pump broke and the car yard wouldn't refund out money, they only gave us credit at their yard.

So I now drive a 1998 Mazda 323 Astina. ($6,500)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Did you watch the keynote? It is way beyond what is described in this article. Looks interesting. Now it is time for them to deliver unlike what happened in 24.
    • It pretty much has to be compatible with MS Office or it is going nowhere. The rest of the world runs office including Europe. If it is not compatible it will not survive.
    • Incredible deal gets you free NVMe 512GB SSD with AMD AM5 B850 motherboard for only $150 by Sayan Sen Earlier this week we covered the story of an interesting PC case wherein you can build two full-size computers inside it as in it can house and run an AMD and an Intel system simultaneously. Speaking of building PCs, these are hard times to make one for sure as prices are often very high except during flash sales or discounts. If you are in the market for a 1080p gaming PC then Nvidia's 8GB RTX 5060 Ti is currently on sale for just $330 and you get the latest James Bond game too, for free. Speaking of which, right now there is another incredible sale going on as we can get a free 512 GB NVMe SSD from TeamGroup in the form of the G50 alongside the purchase of an AMD B850 socket AM5 motherboard for only $150 (purchase link under the specs table down below). Getting an AM5 motherboard now in 2026 will be a wise investment for sure, especially since AMD confirmed its commitment to support the socket till at least 2029. The MSI PRO B850M-P WIFI is a micro-ATX motherboard that is compatible with AMD Ryzen 9000 series processors. Since it is AM5, the motherboard works with DDR5 memory and includes MSI’s Memory Boost technology, along with EXPO and XMP support. Connectivity features include built-in Wi-Fi 7 paired with a 5G LAN solution. The board offers a PCIe 5.0 M.2 slot with MSI’s EZ M.2 Shield Frozr II thermal solution, that is said to help maintain SSD performance by providing ample cooling against overheating. The technical specifications of the MSI PRO B850M-P WIFI motherboard are given in the table below: The free TeamGroup T-FORCE G50 NVMe SSD is a PCIe Gen4 and as such it promises to deliver sequential read speeds of up to 5,000 MB/s, helping accelerate game loading, file transfers, and everyday computing tasks. The SSD features an InnoGrit controller and SLC caching technology to support consistent performance. An ultra-thin, patented graphene heatsink is included to aid in heat dissipation. The NAND flash is based on TLC which means it has plenty of endurance up its sleeve. The random performance may not be as amazing as other drives with DRAM though. Still it should be very good since it can access system memory via HMB to use it as its DRAM cache. The technical specifications of the TeamGroup 512GB G50 NVMe SSD are given in the table below: Get it at the link below: MSI PRO B850M-P WIFI AM5 AMD motherboard + Team Group T-FORCE G50 512GB SSD (free gift): $149.99 (Sold and Shipped by Newegg US) This Newegg deal is US-specific and not available in other regions unless specified. This is a first-party seller link (at the time of article publishing); ensure that you also purchase from a first-party seller link only. If you don't like it or want to look at more options, check out the previous deals that we have covered, OR you can also visit Amazon US deals page. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • RapidRAW 1.5.7 by Razvan Serea RapidRAW is a beautiful, non-destructive, GPU‑accelerated RAW image editor designed for speed and simplicity. It uses a lightweight (~30 MB), efficient code base built with Rust, React and Tauri. Ideal for Lightroom workflows, it offers rich editing tools—exposure, contrast, highlights, shadows, whites/blacks, tone curves, HSL mixer, dehaze, vignetting, film grain, sharpening, clarity and noise reduction—processed in real-time on the GPU. Features include intuitive masking (brush, linear, radial, AI-powered subject and foreground detection), generative edit layers (via ComfyUI), 32‑bit precision, and full RAW format support through rawler. RapidRAW also provides library management (folder navigation, ratings, metadata, EXIF viewer), batch operations, export presets (JPEG/PNG/TIFF), sidecar editing (.rrdata), undo/redo history, customizable UI themes, smooth animations, resizable panels, and preset copy/paste. A modern high-performance Lightroom alternative with polished UX and creative tools, RapidRAW brings powerful photo editing to photographers seeking speed, responsive GPU feedback, and streamlined workflows. RapidRAW v1.5.7 release notes: This update serves as a direct follow-up to the core architectural migration introduced in v1.5.6. While the transition to a more modular state management system marked a significant step forward for RapidRAW's stability and long-term maintainability, it also introduced several edge cases and regressions within the library and editing workflows. This release focuses on addressing those issues, with a particular emphasis on a complete overhaul of library performance to ensure smooth and responsive browsing following the refactoring. It also resolves inconsistencies in the copy-and-paste workflow and expands RapidRAW's accessibility by adding support for eight additional languages. [full changelog] Download: RapidRAW 1.5.7 | ARM64 | ~20.0 MB (Open Source) View: RapidRAW Home Page | Screenshot | Other operating systems Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Thank god they got rid of the disgusting looking sidebars, and the corner radius looks much better, too. Two things I hated on day one, and never got used to.
  • Recent Achievements

    • Very Popular
      Captain_Eric earned a badge
      Very Popular
    • One Month Later
      amusc earned a badge
      One Month Later
    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      223
    3. 3
      ATLien_0
      87
    4. 4
      Steven P.
      80
    5. 5
      +Edouard
      80
  • Tell a friend

    Love Neowin? Tell a friend!