Recommended Posts

Nexus as the name is fine, Dayle was goign to change it by final. Logo is my design so it's fine also.

A new skin would REALLY help out. If anyone wants to have a go at one with me it would be awsome (I have exams right now, so hard to do it on my own).

/edit

As for the logo how about this?

http://img111.echo.cx/img111/2953/nocolor8cc.jpg

http://img111.echo.cx/img111/9381/color3po.jpg

Look above you ;)

I was also thinking... we could just simply update the skin we already have, it would be a lot less work for everyone.

586075218[/snapback]

Both are really good I like the nocolor version a lot, how bout an outlined version of no color ? :blush:

edit: by and outlined version I mean only the nexus word.

  • Like 1
Nexus as the name is fine, Dayle was goign to change it by final. Logo is my design so it's fine also.

A new skin would REALLY help out. If anyone wants to have a go at one with me it would be awsome (I have exams right now, so hard to do it on my own).

/edit

As for the logo how about this?

http://img111.echo.cx/img111/2953/nocolor8cc.jpg

http://img111.echo.cx/img111/9381/color3po.jpg

586075179[/snapback]

I think it would look cool if the logo had those effects that we see in the current builds of nexus. your display picture so to speak... there seems to have bevels and shines if you know what I mean.

Hi Lee, as I said before, now i got this error:

Runtime-error '7'
Out of Memory

And I've found this

Out of memory (Error 7)

Specifics

More memory was required than is available, or a 64K segment boundary was encountered. This error has the following causes and solutions:

    * You have too many applications, documents, or source files open.

      Close any unnecessary applications, documents, or source files that are open.

    * You have a module or procedure that's too large.

      Break large modules or procedures into smaller ones. This doesn't save memory, but it can prevent hitting 64K segment boundaries.

    * You are running Microsoft Windows in standard mode.

      Restart Microsoft Windows in enhanced mode.

    * You are running Microsoft Windows in enhanced mode, but have run out of virtual memory.

      Increase virtual memory by freeing some disk space, or at least ensure that some space is available.

    * You have terminate-and-stay-resident programs running.

      Eliminate terminate-and-stay-resident programs.

    * You have many device drivers loaded.

      Eliminate unnecessary device drivers.

    * You have run out of space for Public variables.

      Reduce the number of Public variables.

Source: MSDN

I've tried all the things I can do, but nothing works... :blink: :( :cry:

Someone can give me a clue how to solve this?? ... :cry: pls.. :unsure:

To everyone having problems:

I have uploaded and installed FlySpray bug finder. This will allow everyone to report bugs when they are found with ease. I should have a link up on the main Nexus page SOON. I just need Lee and TimRogers to get their butts in gear and register there so I can place them as admins.....

To everyone having problems:

I have uploaded and installed FlySpray bug finder. This will allow everyone to report bugs when they are found with ease. I should have a link up on the main Nexus page SOON. I just need Lee and TimRogers to get their butts in gear and register there so I can place them as admins.....

586079414[/snapback]

Great news!! :D :cool:

Big Update:

I'm not allowed speaking about it YET. But I can tell you that it's going to benefit ALL of you. I'm personally calling this a sort of a "Nexus: Revived". I will update everyone on the situation at hand when the time comes.

I would like to welcome RusDzanmahmudov to the Nexus team. He's going to be helping coding Nexus now so we are hopefully going to see some REALLY neat stuff come out of this.

We are also looking for a skinner (*hint*). If you would like to apply, please email what you think Nexus should look like to [email protected] AND also post it in this thread so the community can comment on your design.

I can only say that Nexus will only get better.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Here is how I fixed Windows 11 not booting after clean installation by Taras Buria Story time. A couple of weeks ago, I experienced a very odd thing with my computers. I was trying to reinstall Windows 11 on my primary device, and everything was going smoothly until the installer performed the first restart. After that, my computer entered the boot disk selection screen instead of continuing the setup process. Huh, that's odd, said I, and selected Windows Boot Manager only to see it fall back into the same screen right away. Then I tried booting from the USB drive with the same result—the PC kept returning to the boot device selection screen, and removing the drive would send my PC to UEFI, again, with no way to launch Windows 11. I fired up my spare laptop, which has been sitting unused for quite a while, to see if I am dealing with a defective USB drive. Nope, Windows 11 installed and started without issues. After trying another drive and checking all the possible settings in UEFI, I decided to try disabling Secure Boot. Lo and behold, Windows 11 started as it should have been in the first place, continued the setup process, and reached the initial setup screen. Victory! After I finished the setup and applied all updates, I re-enabled Secure Boot, and Windows 11 started without issues. Some time later, I tried reinstalling Windows 11 on my laptop only to experience similar issues, with UEFI claiming a Secure Boot violation. I checked whether the drive works on my main PC, and yes, it installed Windows 11 without errors. I scratched my head, went to UEFI, turned off Secure Boot, and installed Windows 11 without issues. After that, I enabled Secure Boot. Note: I used the official Media Creation Tool app for my USB drive. Also, UEFI was properly configured for Windows 11, including no Legacy Mode, a GPT-partitioned drive, and TPM and Secure Boot enabled. From my experience, if you are dealing with similar symptoms, I recommend two things: If you use old Windows 11 install media, create a new one with the latest Windows 11 release, especially if you know your PC already has the latest Secure Boot certificates. If you cannot create a new one, turn off Secure Boot, complete the installation, download all available updates, and then re-enable Secure Boot in UEFI. Note that you need to turn off Secure Boot after installing Windows 11. Otherwise, the installer won't run, claiming a hardware requirements mismatch. I believe the problem hides in Secure Boot certificates that expire this month. Microsoft is currently rolling out new certificates, and maybe a mismatch was causing these issues for both of my systems. I am out of my depth to make a definitive statement; this article is flagged as "Opinion," as I only share my experience and some tips on how to fix the problem. If some of you possess deeper knowledge and understanding of the situation, please share it in the comments. As for everyone else struggling with computers not booting after a clean install, the two steps above should get you out of the pickle.
    • I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min.
    • <Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age...
    • ive always been fascinated by old software this is an old video player for windows from apple
  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!