Recommended Posts

lookin good :D

Could you get autopatcher itself to assign the .amp file extension a name and the large orange icon.

(but not associate with the module installer)

And could you make a second icon for .amc's and associate them with the module editor.

(a while ago i somehow got an icon which was a blank white page with a small version of the orange icon in the middle, but ive lost it)

Then both will have a nice icon and it would be possible to distinguish between them (especially needed when extensions are hidden).

(currently i have the large orange icon for both).

lookin good  :D

Could you get autopatcher itself to assign the .amp file extension a name and the large orange icon.

(but not associate with the module installer)

And could you make a second icon for .amc's and associate them with the module editor.

(a while ago i somehow got an icon which was a blank white page with a small version of the orange icon in the middle, but ive lost it)

Then both will have a nice icon and it would be possible to distinguish between them (especially needed when extensions are hidden).

(currently i have the large orange icon for both).

585488051[/snapback]

1. I could, but it's not a good practice to do so without the user being aware of it.

2. Sure. The icon you 'got' is what Windows makes on its own when you associate a file type with a program. It just uses a blank file icon and then puts the program's icon (in a smaller form) on top. I will do a xp-style icon when I get some time.

spelling mistake in priority hover text - 'degit' instead of 'digit' !

also, i just tried editing the text in the registry key box for a module, i put the cursor in the correct place, deleted one letter and it jumped the cursor to the end !!

very annoying!

Edited by TheBlazingAngel

SECURITY BUG !!!!

ill explain exactly what i did...

ive been remaking the tweaks ready for the update

good find, fixed! - Raptor

I hope from that you can workout the problem raptor :)

-----

also spelling mistake in time to install hover text - 'second' instead of 'seconds'

Edited by nw_raptor

OK. The problem as you see is not the Module Editor, but AutoPatcher itself.

By the way: I'm currently uploading the first Test version of AutoPatcher for Windows 2003 (145MB)... If everything goes well, we got yet another release! :)

pasting is disabled under the behavior, detection and installation tabs

im guessing you did it deliberately, but it restricts you from copying and pasting from other modules, which may cause mistakes, and im not sure whether id prefer it enabled or not.

Great program, Raptor. It's near sheer perfection. Just a tiny flaw. Almost not worth to mention. The supported flags on the installation tab cannot be entered in the destinated box by double clicking.

585494057[/snapback]

That's done on purpose. There's really no point in adding it alone, since they mean nothing on their own. If you still want this features however, I'm willing to do it.

BlazingAngel: I will try to enable it :)

Great program, Raptor. It's near sheer perfection. Just a tiny flaw. Almost not worth to mention. The supported flags on the installation tab cannot be entered in the destinated box by double clicking.
That's done on purpose. There's really no point in adding it alone, since they mean nothing on their own. If you still want this features however, I'm willing to do it.

585494761[/snapback]

585494057[/snapback]

You're absolutely right, of course. I just thought I would be more user friendly and it will eliminate typing errors. We should bear in mind that this tool is being used by people who have a little bit more in depth knowledge about autopatching. Did I create a new verb, just now? So, if you would implement this small feature, you would make me a happy man.

Sorry, I thought you referred to my suggestions earlier on. I am sorry to report you that the feature still doesn?t work in the Installation tab.

585498680[/snapback]

Really? It works here alrigh:s:s Did you try clicking in a box (either one) before doing the double-click on the Flag Helper?

Edit: New build... try this....

AutoPatcher_Module_Editor_2.0.zip

Edited by nw_raptor

:blush: Stupid me. It works. I clicked on 'Supported flags' next to one of the boxes and with the mouse went straight to one of the flags, like I used to do on the other tabs. In that case double clicking doesn't work. Perhaps you also should make it possible to select the appropriate box by clicking on 'Supported flags'. That would imho be more intuitive and equal to the behaviour on the other tabs.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • State of Decay 3 is out in 2027, reveals Plague Nests with new co-op gameplay trailer by Pulasthi Ariyasinghe A few months ago, Undead Labs broke its silence about the third entry in the State of Decay series since its announcement in 2020. Today, the studio had a brand-new trailer to reveal at the Xbox Games Showcase, finally giving players a look at the Unreal Engine 5-powered title. A broad 2027 release window is now attached to State of Decay 3 too. The studio confirmed that every scene seen in the gameplay trailer (except for the studio logo) released today is from the game with no cinematic footage. "The quality bar of the moment-to-moment experience is higher than anything we’ve achieved in Undead Labs’ history," says the studio. "State of Decay 3 is being built in Unreal Engine 5, and we’re creating better quality versions of what makes our game the survival sandbox it is, and the combat experience is really, really important to us, and I think you can see it coming through in this trailer." One new aspect of this upcoming entry is the Plague Nests. These are supposed to be dynamic, dungeon‑like enemy hubs with varied “personas” that change tactics each time one appears on a map. These areas will have the best loot in the game for players brave enough to tackle them. The combat system is being overhauled too, letting players do quick and power attacks depending on the situation. This isn't just on the player's side though, as zombies themselves now have multiple new types of behaviors depending on how fresh or decayed they are. "All of these play very differently, especially as you start getting outnumbered or when you’re making noise and running around and trying to save your rear end or the rear end of your friend next to you," adds the developer. Of course, settlement building and community management are massive parts of this third entry too. These are being further expanded with the cooperative focus, giving players much more freedom for playing together than in State of Decay 2. Players will even be able to split up and build settlements in different areas of the same map with different goals. Undead Labs confirmed that playtests are already ongoing for the title, and interested players can sign up to participate by heading over here once more slots open up ahead of the full release. State of Decay 3 is coming out on PC, Xbox Series X|S, PlayStation 5, and Xbox Game Pass sometime in 2027.
    • Doom: The Dark Ages Revelations expansion gives the Slayer a brutal Chain Spear by Pulasthi Ariyasinghe Last year, id Software released Doom: The Dark Ages as a prequel to its reboot series, offering a look at the legendary Slayer character during an ancient war between Hell and Heaven. Today, at the Xbox Games Showcase, id Software returned with a new announcement that unveiled Doom: The Dark Ages Revelations as its first story expansion. The expansion will see the Slayer being betrayed and cast into a "merciless purgatory only escapable by confronting haunting truths." Somehow, there is one ally in all this chaos seemingly attempting to help our protagonist escape his fate. Players will be ascending this prison and fighting plenty of new demons and abominations as they work to free the Slayer's followers. One new aspect of the expansion will be the Chain Spear. This new weapon is described by the studio as a "uniquely satisfying combat system that rewards mastery with a potent combination of power and mobility." Check out the trailer below to see the new weapon in action, where the Slayer is seen using it to even pin enemies to walls. id Software is also preparing a free update to all owners of Doom: The Dark Ages that will land alongside the new paid expansion. Dubbed the Ripatorium 3.0 update, this will add more customization options, an improved pass code generation system, and preset options for players diving into the game's arena challenge mode. Expansion buyers will also receive additional maps, demons, and new weapons to use in this mode in addition to the story levels. Doom: The Dark Ages Revelations expansion is out on July 7 across PC, Xbox Series X|S, and PlayStation 5 with a $19.99 price tag. Those who own the Premium Edition or the Collector's Bundle will receive the expansion for no extra cost as well.
    • Hyped for this. Replayed the remasters recently and they're so well done, and Crash 4 was great too. I trust this team to deliver.
    • Ninja Theory's new Hellblade game is action-focused and set in Purgatory by Pulasthi Ariyasinghe Ninja Thery has been building its award-winning Hellblade series since 2017, delivering Senua's Sacrifice and Senua's Saga since then. Today at the 2026 Xbox Games Showcase, the studio had a brand-new installment announcement featuring Senua again, but this time, she is in a version of purgatory, and the focus is on the action. Simply named Senua, this new entry is described as a "full-on action-adventure" experience, delivering an expanded focus on combat, puzzle-solving, and freedom of exploration. The developer says that it is keeping the same high production values and storytelling features of the previous games while giving what players have been asking for in the gameplay department. The entirety of Ninja Theory is now working on Senua, giving the project much more manpower than ever before, while also letting the team draw on its action roots from Devil May Cry and prior titles. However, the studio also confirmed that its previously announced Project Mara horror experience is no longer in development. Alongside snappier traversal moves, Senua will be able to take stealth and direct combat routes. She has access to her own sword, plus any enemy weapons as well, with dual wielding also being an option for most dropped melee swords, axes, and other weapons. Outside of melee combat, Senua will be able to use special abilities that let her alter the reality around her. The world is said to be about twice the size of Hellblade 2. While this won't be an open-world experience, the linear story will let players explore their surroundings further than before. The story of Senua will be set after the events of previous Hellblade titles, with our protagonist being stuck in her own version of Purgatory. The series' well-explored psychosis themes will return as well. "She’s trapped between life and death on a quest to reach the afterlife and be reunited with the ones that she’s loved and lost," adds the studio. "Her belief is that by healing the wounds of her life, she can find the peace that is the key that unlocks the gate to the afterlife." Senua is releasing on Xbox Series X|S, PC, and PlayStation 5 sometime in 2027.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      492
    2. 2
      PsYcHoKiLLa
      248
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      68
    5. 5
      ATLien_0
      67
  • Tell a friend

    Love Neowin? Tell a friend!