Recommended Posts

I just enabled Aero Glass and it's pretty cool. You need to have a pretty fast processor (this is very intensive especially with the 4074 explorer leak) and at least a 128mb DX9 compatible card with Pixel Shader 2.0. I have a RADEON 9600 XT and IMO it is the minimum for this effect. Also, you should probably make a registry backup or a restore point just for sh**s and giggles ;) . Follow these steps:

1. Start with a clean install. Seriously, if you don't start fresh there may be problems (i.e. i applied tweaks and fixes, especially the explorer leak fix, and the glass effect just wouldn't work!) Also, important, make sure the sidebar is active!

2. Download this skin (theme), extract it, and put the folder named "Aero" in the Windows/Resources/Themes folder. Then, open the folder, double click aero.msstyles, and click OK in the window (Display Properties) that pops up. NOTE: If the link above for the skin does not work (which it should), just search google for "dwm skins", or "ExplorerGlass-BOFH-Beta2.rar" and you should find it easily.

3. Add this key to the registry by following these instructions: Type "regedit" in the "Run" box on your Start Menu, then navigate to

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer

Right click in the window, then highlight "new", then "DWORD Value". Name it MILExplorer, then right click MILExplorer (you just created it) and select "Modify". Enter a 1 in the "Value data" box.

4. NOW restart your computer.

5. Once rebooted, go to the Start Menu, click on "Run" and type the following in the box to start DWM:

rundll32 c:/windows/system32/uxdesk.dll,DwmStartComposition

6. That's it! Aero Glass! COOL!

NOTE: You will not be able to use IE/Explorer (You won't see your windows) unless you enable DWM by following step 5 AS SOON as you reboot. Trust me, don't try to open any windows 'cause you won't see 'em unless DWM is started. Don't worry though, you can still get to the Start Menu and the "Run" box.

EDIT: I forgot to mention that DWM MUST be reactivated every time you reboot because it doesn't start automatically. As I explain in the NOTE, you won't be able to use explorer/IE if you don't. An easy way around this is to create a batch file and place it in your "Startup" folder so it will always initiate upon startup.

I did not create this skin nor did I come up with this method. This is just what I have found by looking around on the 'net for hours trying to figure out how to get this cool effect. The skin is BOFH's and is an example of his great work! Thanks.

post-97126-1110806668_thumb.jpg

Edited by CollegeGuy
Link to comment
https://www.neowin.net/forum/topic/296493-enable-aero-glassstep-by-step/
Share on other sites

Is this just for Longhorn? (i'm guessing by what forum this is in)

Can you get rid of it and/or change back to another theme without removing this one?

Do you need a patched uxtheme.dll file?

585614682[/snapback]

Yes, this is just for Longhorn (4074 only as far as I know). No, you can't change to another glass theme without removing this one (or at least moving it to another folder besides Themes) Use the one I specified or another glass dwm skin, if you find a good one, but if you do change to another glass theme, you'll have to move the old folder named Aero to a seperate location, as I'm pretty sure for this to work whatever theme you use for the glass effect has to be named "Aero". There is no need to patch uxtheme.dll, I'm pretty sure you only have to do that for XP.

Why don't you do step 5 in the registry?, in the Run section.

585614692[/snapback]

Sorry i don't quite understand the question, do you mean initiating the command from the registry, if so i didn't know that was possible. The way I explained works for me, but if you know what you're doing then by all means. :) My guide is simply the easiest way I found to do it.

Assuming the 'reg' command is available on Longhorn (it is on XP...) you can substitute step 3 with this:

reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer /v MILExplorer /t REG_DWORD /d 1

and step 5 with this (cred to The_Decryptor for this, see post above :)):

reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Run /v Glass /t REG_SZ /d "rundll32 c:/windows/system32/uxdesk.dll,DwmStartComposition"

Would be nice to try this myself, but no Longhorn availble here. Thanks anyways CollegeGuy :)

i cant believe people are still playing around this old build, im just going to wait for the next pdc build and then for the beta1.....i havnt installed my pdc2004 longhorn for sooooo long

585623522[/snapback]

rofl beta 1 is coming before pdc and the m9 developer preview is coming at winhec before beta 1 :laugh: Whats even more funny is there never was a pdc 2004

/me laughs at all of you

there is an easy way to make it so that aero glass will work without dwm. it involves hacking a file though :p and finding the file is still a daunting task :)

but once thats done, you can run glass side/taskbars without turning on dwm :)

an example

(geez, i posted that pic in two threads already... >_<)

/me laughs at all of you

there is an easy way to make it so that aero glass will work without dwm. it involves hacking a file though :p and finding the file is still a daunting task :)

but once thats done, you can run glass side/taskbars without turning on dwm :)

an example

(geez, i posted that pic in two threads already... >_<)

585626088[/snapback]

http://www.aeroxp.net/board//index.php?showtopic=103

Some people in other boards (like this one ) wished they could be able to run the aero glass taskbar and the semi-transparent sidebar without the "bugginess" of having the DWM enabled.

If you dare hack a single DLL and exchange a couple characters (to keep CRC check from getting aware of the hack) then you can have the usual Jade theme working perfectly without needing to enable DWM nor needing to keep changing the registry one and other time just to keep that.

You'll need a good hex editor.

Here you go:

Start your hex editor and, with explorer, go to

WINDOWS\assembly\gac_32\System.Windows.Explorer\6.0.3708.0__a29c01bbd4e39ac5

Copy System.Windows.Explorer.dll now into System.Windows.Explorer.dll.bin

and stop Explorer.exe from task manager.

edit System.Windows.Explorer.dll.bin

With the hex editor, search for this string:

4d0049004c004500 (it's the equivalent of MILE in Unicode)

and replace it with:

49004d004c004500 (the equivalent of LIME) hence no CRC damage

Now rename System.Windows.Explorer.dll into System.Windows.Explorer.dll.bak

and rename System.Windows.Explorer.dll.bin into System.Windows.Explorer.dll

Start regedit from Task Manager and change the old DWORD value of MILExplorer into LIMExplorer

Restart explorer.exe from task manager.

Since the explorer windows are made out of code inside other libraries that don't pertain to the avalon interface, they will open as usual because there is no longer an MILexplorer entry telling them to expect DWM, and since the Avalon assembly-driven traskbar and sidebar run from the DLL we just changed, then the glass effect will appear in those two areas of your desktop. Result? your beloved glass without DWM bugs and no unneeded hassle!

Maybe Stan would like to integrate the procedure into a single, small EXE wink.gif

/me laughs at all of you

there is an easy way to make it so that aero glass will work without dwm. it involves hacking a file though :p and finding the file is still a daunting task :)

but once thats done, you can run glass side/taskbars without turning on dwm :)

an example

(geez, i posted that pic in two threads already... >_<)

585626088[/snapback]

Yes, that is true (Customization Pack for Longhorn 4074 by joejoe includes the reg hack), but going that route does not enable the glass effect for the explorer windows, and I'm pretty sure it may not enable the cool ALT+TAB effect either! Also, thanks to andyandy and Decryptor for those shortcuts concerning steps 3 and 5. They'll save you time, I'm sure! I haven't tested them, but I have every confidence they will work. I'll add them to the steps if successful (with nods to you guys of course)!

Edited by CollegeGuy
I just enabled Aero Glass and it's pretty cool.  You need to have a pretty fast processor (this is very intensive especially with the 4074 explorer leak) and at least a 128mb DX9 compatible card with Pixel Shader 2.0.  I have a RADEON 9600 XT and IMO it is the minimum for this effect.  Also, you should probably make a registry backup or a restore point just for sh**s and giggles ;) .  Follow these steps:

1. Start with a clean install. Seriously, if you don't start fresh there may be problems (i.e. i applied tweaks and fixes, especially the explorer leak fix, and the glass effect just wouldn't work!) Also, important, make sure the sidebar is active!

2. Download this skin (theme), extract it, and put the folder named "Aero" in the Windows/Resources/Themes folder.  Then, open the folder, double click aero.msstyles, and click OK in the window (Display Properties) that pops up.  NOTE: If the link above for the skin does not work (which it should), just search google for "dwm skins", or "ExplorerGlass-BOFH-Beta2.rar" and you should find it easily.

3. Add this key to the registry by following these instructions: Type "regedit" in the "Run" box on your Start Menu, then navigate to

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer

Right click in the window, then highlight "new", then "DWORD Value".  Name it MILExplorer, then right click MILExplorer (you just created it) and select "Modify".  Enter a 1 in the "Value data" box.

4. NOW restart your computer.

5. Once rebooted, go to the Start Menu, click on "Run" and type the following in the box to start DWM:

rundll32 c:/windows/system32/uxdesk.dll,DwmStartComposition

6. That's it!  Aero Glass! COOL!

NOTE: You will not be able to use IE/Explorer (You won't see your windows) unless you enable DWM by following step 5 AS SOON as you reboot.  Trust me, don't try to open any windows 'cause you won't see 'em unless DWM is started.  Don't worry though, you can still get to the Start Menu and the "Run" box.

EDIT: I forgot to mention that DWM MUST be reactivated every time you reboot because it doesn't start automatically.  As I explain in the NOTE, you won't be able to use explorer/IE if you don't.  An easy way around this is to create a batch file and place it in your "Startup" folder so it will always initiate upon startup.

Exactly.

This a hack, and thus it will work for *any* graphics card. However, the DX 9 support is a must if you want any decent speed. I tried it with my AIW 8500DV. While it still works, it is dog-slow. Other Web browsers (Netscape, Opera, Firefox, etc,) still work without this hack.

Made a whole Package of Customization....and even easier...

http://joejoe.ath.cx/

585654491[/snapback]

You have a great customization pack. It's just, I tried it and was unable to get the transparent glass effect. After much researching, I made this step by step guide. Your customization pack includes screenshots of a great looking desktop with glass explorer windows, but no real way to do it (believe me I tried). So I wouldn't say it's neccessarily easier (or possible without some research and skins) to attain the glass effect with your package. Of course, your batch files do speed up the process of enabling DWM, but as I explained earlier this is just the easiest way for me. It would be great if you could include some transparent glass skins in your package so the screenshots you include are actually attainable. Or maybe you could just included a more detailed guide on how to attain the effect using skins, so people such as me wouldn't have to spend so much time trying to figure out how to make ours look like the screenies. Great pack otherwise! Thanks joejoe :)

PGHammer, actually, the effect won't work with *any* card. Believe me, I had a 64mb Geforce 2 MX400 before and it was worthless when it came to this effect (see screenie below). I even started another thread a while ago asking for advice on the type of card I would need for this effect. After many replies I settled on the 9600XT. It works great. After considering their replies, I believe the card must be DX9 compatible for the effect to work at all. Or at least a higher end card.

post-97126-1112096157_thumb.jpg

It's proven to work on MX440's with some exact drivers from NVidia, and anyways, the MX440 is a DX8 card.

585695213[/snapback]

The 8500DV is also a DX 8 (specifically 8.1) card, which is why the effect works (albeit very slowly). However, DX 9 and 128 MB (of course, 256 MB makes performance even snappier) makes the performance reasonable. (I got my replacement AIW 9700 Pro back and am posting this from my LH drive with AeroGlass active....*very nice*.)

The 8500DV is also a DX 8 (specifically 8.1) card, which is why the effect works (albeit very slowly).  However, DX 9 and 128 MB (of course, 256 MB makes performance even snappier) makes the performance reasonable.  (I got my replacement AIW 9700 Pro back and am posting this from my LH drive with AeroGlass active....*very nice*.)

585710898[/snapback]

Tried it with a 9700 Pro as well, works amazingly well =).

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Disabling open on hover, great! That was so stupid! They need to do a fix, where if a network share is disconnected, it doesn't hang when opening "This PC" for 20 seconds.
    • Microsoft releases major feature updates for stock Windows 11 apps by Taras Buria In addition to releasing new Windows 11 preview builds, Microsoft announced that inbox Windows apps now have dedicated release notes in the official documentation. At long last, users have access to all the release notes for each app, with changes listed in chronological order. Microsoft used to announce feature updates for stock apps with each build. Now, with Windows Insider release notes hosted on the Microsoft Learn website, each app has a dedicated space for its changelog, which is very useful for those who want to track new features and improvements. Alongside that, Microsoft dropped massive feature updates for six stock apps: Clock, Media Player, Calculator, Voice Recorder, Photos, and Paint. Each app packs quite a lot of changes and new capabilities, so here are the release notes. Here are quick notes so that you can jump to the app you are interested in the most: Calculator Camera Clock Media Player Paint Photos Sound Recorder Here is what is new for the Calculator in version 11.2605.9.0: More accurate square-root results — Fixed rare cases where a calculation that should equal zero (like sqrt(2.25) - 1.5) returned a tiny leftover value instead. Readable text in High Contrast themes — Settings text now shows the correct colors in the High Contrast Aquatic and Desert themes. Fixed layout for right-to-left languages — For languages like Arabic and Hebrew, the graph, number pad, equation fields, and scroll buttons now appear correctly oriented. Reliable launch after upgrading — Fixed an issue where upgrading from much older versions could leave outdated settings that stopped the app from opening. Here is what is new for the Camera app (version 2026.2605.7.0): Zoom slider works on more cameras — The zoom slider now works on the latest cameras, respects your system zoom settings, and updates instantly when you change those settings. Full range of zoom levels — Fixed an issue where the zoom slider only showed three steps on some devices that zoom in finer increments. Front camera works on more devices — Resolved a problem that blocked the front-facing camera on certain wide-angle devices. More video resolution choices — You can now pick video resolutions that were previously hidden; the app shows a heads-up warning instead of removing them. QR links you can still use — When a scanned QR code points to something with no matching app, the link is now copied to your clipboard (with a notification) while still offering a Store search. Smarter default settings — When you haven't set a preference, the app now follows your system settings by default. The Clock app has a massive changelog with the following improvements in version 11.2605.9.0: Timers keep counting after they hit zero — When a timer runs out, it now keeps counting up (for example, -00:27:31) so you can see how far past the time you've gone. You can turn off the daily goal — Focus Sessions now include an "Off" option so you can skip setting a daily goal entirely. New 15-minute snooze option — Alarms now offer a 15-minute snooze interval. Run up to 3 countdowns at once — The Countdown Widget now supports three simultaneous countdowns, up from two. Timer Widget notifications now appear — Fixed an issue where the "timer finished" notification didn't show when the timer was started from the widget. Less clutter in Focus Sessions — Tasks you've already completed no longer show up in the Focus Session task list. More accurate focus progress — Fixed a rounding issue that could show your daily focus progress as a minute short (for example, 49 minutes instead of 50). Smoother World Clock comparisons — The World Clock compare page now loads dates as you scroll, so it feels more responsive. Up-to-date World Clock locations — Refreshed country and city names to match their current names. Correct sun and moon icons during midnight sun — Fixed an icon that wrongly showed a moon during all-day daylight in polar regions. Fixed back-button behavior in clock comparisons — Pressing back once now takes you back as expected, instead of jumping the date to 1926. Corrected the Newfoundland time zone — Newfoundland now uses the right time zone (St. John's). Disabled alarms stay looking disabled — Editing a turned-off alarm no longer makes it appear turned on. Cleaner timer cards — The expand button is now turned off on timer cards that have no time set, preventing actions that wouldn't do anything. Clearer theme setting — Updated the wording to "Choose your preferred app theme." Smoother Settings links — The "About" links in Settings no longer trigger an unexpected "switch apps" prompt. Fixed spacing in Spotify settings — Corrected uneven spacing in the Spotify settings card. Better focus visibility in High Contrast — The focus highlight in World Clock is now clearly visible in the High Contrast Aquatic and Desert themes. No more double announcements — Screen readers no longer read the timer value twice. Countdown names read correctly — Screen readers now properly announce the name of each countdown. Keyboard focus stays put — Focus no longer disappears after you press the Timer Reset button. Clearer alarm toggle for screen readers — Tidied up how the alarm on/off switch is announced. The Media Player app received plenty of changes as well (version 11.2605.14.0): Custom captions — You can now personalize how closed captions appear, with caption styling tied to your Windows caption settings, plus a quick link to open those settings directly. "Indexing" banner in the play queue — When your media library is still being scanned, a banner now explains why some items may not appear yet. Fixed the look of selected items — Corrected a layout glitch with selected items in lists. Fewer playback failures — Improved how the app recognizes supported file types, so more files play without issues. Playlists need a name — You can no longer accidentally save a playlist with a blank name. Cleaner look for empty playlists — Improved how a playlist appears when it has no items yet. More stable play queue edits — Fixed a crash that could happen when changing the play queue while the app was switching between sessions. Clearer "missing codec" message — Improved the dialog that appears when a file needs a codec you don't have, with clearer guidance on what to do. A big update is also available for Paint in version 11.2605.61.0: Adjustable eraser transparency — You can now control how transparent the eraser is. Cleaner stamp brush strokes — Fixed visible color shifts and artifacts when using stamp-style brushes. JPEG photos save in place — Opening a rotated JPEG and pressing Save now overwrites the original instead of unexpectedly prompting "Save As." No more crash on bad image files — Opening a damaged or invalid image, from within the app, by double click, or commandline, now shows a clear error message instead of closing the app. Classic selection behavior restored — The selection outline now hides while you move, resize, or rotate a selection, just like in classic Paint. Tidier AI image panel — Fixed missing spacing at the bottom of the AI image generation panel for a cleaner layout. Visible button hover in light theme — Toolbar split buttons now show a clear hover highlight in the light theme. Snappier toolbar — Streamlined how the ribbon lays out, giving a small speed boost at startup. Fewer background crashes — Fixed a crash that could happen while background tasks were finishing up. Stable app shutdown — Prevented rare crashes when closing the app. Fixed layer removal glitch — Deleting the active layer no longer leaves the layers list in an inconsistent state. Here is what is new in the Photos app (version 2026.11060.2004.0): AI watermarking — AI-generated or edited images can now carry a visible Copilot watermark. You choose Never, Always, or Ask Every Time in Settings, with a confirmation when saving. The watermarking is off by default in settings. Better viewing of small images and pixel art — Tiny images (like 16×16 pixel art) now zoom in far more to fill the screen and stay crisp instead of looking blurry. Select scanned text with the keyboard — When text is detected in an image, you can now navigate and select it using the arrow keys, Shift+Arrow, Home/End, and Ctrl+A, with a clear focus highlight. Fixed a crash in text recognition — Resolved a crash that could close Photos while detecting text in images; the app now recovers gracefully. Easier keyboard navigation — Tabbing through the navigation bar no longer stops on hidden controls, so it takes a single Tab to move past it instead of three. And finally, here is the Sound Recorder (version 11.2605.1.0): Waveform shows with Bluetooth mics — The live waveform now displays correctly when you record using a Bluetooth audio device. No more stray scrollbar — A non-working horizontal scrollbar no longer appears at the bottom of the waveform unless you've zoomed in. Mark button ready right away — The Mark button no longer looks grayed out until you hover over it after opening the app. Markers hidden for WAV files — Markers are now turned off for WAV recordings, since that format can't store them — so they're no longer lost silently. Smoother deleting — Quickly pressing Delete and Enter to remove several recordings in a row no longer triggers a "file doesn't exist" error. Fixed a memory issue — Resolved a memory leak that occurred each time a recording started. You can find all these changelogs in the official documentation here.
    • again, an article about Microsoft Edge and ridicules hater's comments
    • From this very same article: "For organizations that prefer a “more deliberate pace”, the Extended Stable channel remains an option."
    • Or every other browser, because they all behave the same, at least the mainstream ones. Firefox does exactly the same: background updates, restart to install them. Haters gotta hate, I guess.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      PsYcHoKiLLa
      170
    3. 3
      +Edouard
      162
    4. 4
      Steven P.
      85
    5. 5
      ATLien_0
      78
  • Tell a friend

    Love Neowin? Tell a friend!