Maxtor VS Seagate!


Recommended Posts

i need a new hdd..

and im tryin to decide between maxtor or seagate..

they both have their advantages..

EDIT:

-Maxtor DiamondMax 10 SATA/150 300GB 7200RPM 16MB Buffer

VS

-Seagate 300GB ST-3300831AS Barracuda 7200.8RPM SATA w/NCQ

**IF THEY'RE THE SAME PRICE, SAME WARRANTY, SAME SIZE**

**WHICH ONE SHOULD I PICK?**

Edited by SmokeDragoon
Link to comment
https://www.neowin.net/forum/topic/320213-maxtor-vs-seagate/
Share on other sites

Maxtor sucks, Seagate NCQs, WD 0wns. no competition :D go WD, NCQ doesnt do much. go a WD Caviar.

585916970[/snapback]

then you really shouldn't be using a pc if you think Maxtor sucks. but then again this is neowin and idiotic posts like this don't surprise me.

Most members here in the Hardware hangout know my stance when it comes to Seagate vs Maxtor vs Western Digital.

THERE ALL GOOD, DONT BLAME A COMPANIES HDD"S BEING SUCKY BECAUSE YOU DIDNT TAKE THE PROPER PRECAUTIONS ON MAKING SURE THAT HDD LIVED A LONG TIME AND SERVED IT PURPOSE.

sometimes you do get a bad lemon, but a bad lemon don't spoil the basket.

I'm not into the whole HDD game - I just go with whichever drive gives the best GB per $$$ ratio. From what I've heard though, all 3 (Maxtor, Seagate, Western Digital) perform around the same and the performance difference between them is likely unnoticeable. However, I've also heard Seagate's drives run the quietest.

ripgut, i have reason to hate maxtor. year or two ago, bought a maxtor 80gb, and it died within a few months. ive been using WD or hitachi in my old laptop since then, and neither have given me any probs.

585917035[/snapback]

thats nice, but does it prove anything? no. there are a million people who say that about wd, and a million people who say that about hitachi, and a million people who say that about seagate.

i agree with ripgut. it does not matter.

get whatever is cheapest or has the longest warranty.

thats the thing.. they're the same price.. same warranty..

i bet they even copied and pasted the whole thing..

the only diff in the listing is 1 says 16MB buffer instead of 8..

and NCQ for seagate.. the rest r EXACT SAME..

so any small difference can change which 1 i get..

EDIT: nvm.. Suren was right.. they do both have ncq.. so really its obvious.. MAXTOR IT IS..

up until a month ago, i've gotten only maxtor drives.. which has spanned about 5 years. my first maxtor sucked because it was ata66 and was noisy as hell.. but every one after that (probably 20 or so) served me no problems, and in fact, performed amazingly well. It runs a bit quieter and keeps better performance when moving large amounts of information.

Even coming from me, a die-hard Maxtor "fanboy", i'd recommend a Seagate with NCQ.

External or internal?

If you are after an external HDD then I would suggest Maxtor's onetouch II. Just got mine and very happy with it. Great piece of kit! :happy:

I own a seagate and WD also and no complaints about them, so really just pick whichever one you want. They all perform well.

My school had 40 Maxtor drives installed in their computers a few years ago. They all died after 6 months all at the same time. The annoying thing was - there were three of us that had to go round and replace them. My old 4.3GB Maxtor drive is very loud, although that isn't an issue nowadays and my ex-gf's 80GB Maxtor HDD was also knackered after 6 months.

However, saying that, Maxtor does have an excellent RMA service. I did that with my gf's 80GB drive and Maxtor sent me a 120GB back!

My vote though = Seagate.

I had all HD's. My first HD was a seagate 210 mb!!! To tell you the truth I've never had any problems with any HD and I had all 3 brands.

Currently I'm using 2 maxtors and I had not shut down my pc at night for 2 years now....

For me they are all the same. Meaning high quality stuff. Never bothered me.

For me, any of these 3 brands will do just fine. And I don't want to hear that a HD is faster by 1 ms from the other in access time or whatever. Thats a load of ****.

My vote? I vote all 3!

Well, I have had a couple of Maxtor drives before, but from the techs I've talked to, they should've lasted longer than they did. So I decided to go Western Digital. I have NOT had a problem yet. These two WDs I'm using takes a beating and I've had them for a few years now. Although, I want to move onto SATA now and am thinking on trying Seagate. I've heard great things about their drives plus the longer warranty. I'll have to see....

Go with Seagate, 5 year warranty... Don't get maxtors!!! I had my last 2 maxtor drives die before a year of use (both were RMA'ed for failing and the ones sent to me died sooner)... never again.. If I couldn't get a Seagate I would go with a Western Digital

585917032[/snapback]

Seagate has an appealing warranty, but what people fail to realize is that the warranty is 5 years from the date of manufacture. For newer drives, this is great because you know the manufacturing date will be relatively close to the date of purchase, but you could still get burned on it.

I have never had a WD drive fail on me, and I have had a Maxtor go dead. I have a couple Maxtors in my system right now and have no problems, so this goes to show that a bad apple does slip through now and then. My WD's are quieter than my Maxtor drives, but now it is hard to tell since my CPU fan is about as loud as a lawnmower... Time to make the jump to watercooling soon :D

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • IBM reveals sub-1nm chip technology, production expected in another 5 years by Pradeep Viswanathan TSMC is now leading the chip manufacturing industry with its 2nm-class process node called N2. Samsung Foundry also has a 2nm-class process node called SF2. TSMC says N2 entered volume production in Q4 2025. Samsung says SF2 started mass production in 2025. Today, IBM announced the world’s first sub-1-nanometer chip technology, marking another major semiconductor research milestone. The new technology is based on a 0.7nm, or 7-angstrom, node and uses a new transistor architecture called “nanostack.” The new design vertically stacks and staggers nanosheet-based transistors so that more components can fit into the same chip area while also improving performance and power efficiency. IBM claims that this new sub-1nm chip can pack nearly 100 billion transistors onto a chip the size of a fingernail. This offers almost twice the density, up to 50 percent higher performance, or 70 percent better energy efficiency when compared to IBM's 2nm node design announced back in 2021. Also, IBM mentioned that this new architecture can deliver 40 percent SRAM scaling. It is important to consider that this announcement from IBM is a research milestone rather than a near-term process node launch. Back in 2021, IBM unveiled the world’s first 2nm chip design, claiming 50 billion transistors on a fingernail-sized chip and major performance and efficiency gains. Five years later, IBM’s 2nm technology has still not entered mainstream commercial production. That is because IBM is no longer a major commercial chip manufacturer. It sold its chip manufacturing business to GlobalFoundries years ago and has since then focused only on semiconductor research, IP development, and partnerships. To productize its 2-nm chip technology, IBM partnered with Japan’s Rapidus, but it has not resulted in anything shipping at scale. IBM says that its new sub-1nm technology can reach production as early as within the next five years. If that happens, it will likely depend on manufacturing partners, advanced EUV tooling, and years of yield improvements.
    • It's funny when thieves accuse other thieves of stealing. Ai companies just blatantly siphoned all the knowledge of the internet without consent and are now selling it with their service... so excuse me if I find this a bit ironic.
  • Recent Achievements

    • Week One Done
      Meta Plast earned a badge
      Week One Done
    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      454
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      135
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!