Space Shuttle Discovery


Recommended Posts

KENNEDY SPACE CENTER, Florida (CNN) -- "Unstable" weather conditions prompted NASA to scrub Discovery's scheduled landing Monday, the first space shuttle landing attempt since the Columbia disaster.

The next opportunity is scheduled for Tuesday at 5:07 a.m. ET at the Florida landing site.

"We've been working hard on this," said entry flight director Leroy Cain at Johnson Space Center in Houston, Texas. "There continues to be a lower layer of clouds from 400 to 500 feet that's been scattered all evening."

The cloud cover, although within NASA's safety limits for landing, was enough to make mission controllers uncomfortable about attempting a Monday touchdown in Florida.

Commander Eileen Collins was given the scrub order from mission controllers at 5:05 a.m. ET.

"We just can't get comfortable with the stability of the situation for this particular opportunity. So we're going to officially wave you off for 24 hours," Ken Ham said at mission control.

"OK, Houston we copy that. We'll be a wave off for today," Collins responded.

Officials would prefer to land at Kennedy Space Center to avoid the inconvenience of flying the shuttle back to its launch site from alternative landing strips in California or New Mexico.

Mark Polanksi, a pilot during a 2001 mission aboard the shuttle Atlantis, said the waiting is easier for orbiting crew members than it is for their families.

"It's much harder for people on the ground," Polanski said. "Loved ones don't know when their people are coming home."

Polanski and astronaut Nicholas Patrick are assigned to a shuttle mission aboard Discovery in 2006. Patrick said the orbiting astronauts have more than enough supplies to keep them until they can return.

"In between powering down today and preparing for Tuesday's landing attempt, they'll be taking care of some housekeeping and perhaps finding more time to be looking out the windows," Patrick said.

Following the decision to remain in space another day, Discovery received permission to re-open its payload bay doors and began powering down systems that had been poised to fire engines to take it out of orbit.

During Tuesday's de-orbital burn, the spacecraft's engines will ignite for about three minutes, slowing it enough to begin its fiery journey through the atmosphere.

Discovery's pilot, astronaut James Kelly, said Sunday that returning to Earth is much like riding on a runaway train.

"Once we start re-entering the atmosphere, you start seeing the plasma go by the windows," Kelly said, referring to colorful, super-hot gases.

It's "a very exciting and exhilarating process that ends with being at home," said Kelly.

Though it launches into orbit like a rocket, the shuttle returns to Earth like an airplane. As it begins to transition from space, computer-controlled jets guide the shuttle. Once the atmosphere thickens, Discovery's wing flaps and rudder steer it much like they would a conventional aircraft.

When the shuttle slows below the speed of sound, it triggers a sonic boom that alerts Florida residents that the spacecraft is returning home.

It was during re-entry in February 2003 that Columbia broke apart, killing its seven crew members.

Investigators later determined that super-heated gases that normally surround the orbiter as it returns to Earth entered Columbia's left wing through a hole created when insulating foam fell from the shuttle's fuel tank and struck the vehicle during launch.

The Columbia break-up left a trail of debris across Texas and Louisiana and resulted in vows from NASA that tighter safety precautions would be taken on future trips -- and that the problem of falling foam would be solved.

Under new guidelines, Discovery will follow a trajectory that takes it largely over ocean.

Beginning with an orbital speed of about 17,500 mph, the shuttle is scheduled to enter the atmosphere over the Pacific Ocean and glide over Nicaragua, Cuba and the Gulf of Mexico.

It then should pass over Florida's Lake Okeechobee and, moving at about 220 mph, touch down at the Kennedy Space Center.

Mission STS-114 largely was designed to improve safety on future shuttle journeys, although the program has been suspended while NASA investigates its failure to solve the problem of foam falling from the shuttle's external liquid fuel tank during launch.

Video from the July 26 launch showed debris falling from the fuel tank, but NASA said it did not appear to have struck the orbiter. Once in space, Discovery's crew used cameras to scrutinize the craft's exterior for possible damage that might pose a threat during re-entry.

The shuttle spent most of the mission docked to the international space station, delivering much-needed supplies and performing maintenance on the outpost.

Astronaut Steve Robinson performed an unprecedented shuttle repair mission by plucking two pieces of filler material protruding between tiles on Discovery's underside. NASA wanted them removed to ensure they wouldn't overheat, damaging Discovery's belly during re-entry.

Mission controllers said an additional spacewalk to fix a damaged thermal blanket under one of the cockpit windows was not necessary.

New Florida arrival set for 5:07 a.m. ET Tuesday

Source CNN

There isn't too much danger for the shuttle as far as being stuck in space because of weather.

There are many places in the world where it can land.  There are several airports, all over the world, with runways that can accomodate a landing shuttle.

If they have to come down, they will have a place to land no matter what.

586343888[/snapback]

They said tomorrow they'll have opportunities at Kennedy in FL and Edwards AFB in CA and a shot in Mexico (forgot the name of the airfield). Two shots a piece at FL and CA and don't know how many at the Mexican site.

There was low cloud cover that concerned them.

With all the repair they had to do,...? I'm a bit hopeless.:((

586344976[/snapback]

Well in the past they probably would have never even KNOWN about half of the problems and landed fine. We have to remember this was the most videotaped and scrutinized flight ever. They've landed in the past with that filler material sticking out. And maybe I'm wrong but wasn't the procedure to remove the filler the only repair to the shuttle itself? Weren't the rest planned repairs to the space station?

O and https://www.neowin.net/forum/index.php?showtopic=355388&st=45

Edited by bigbluepride35
They said tomorrow they'll have opportunities at Kennedy in FL and Edwards AFB in CA and a shot in Mexico (forgot the name of the airfield). Two shots a piece at FL and CA and don't know how many at the Mexican site.

586344460[/snapback]

I believe it is something along the lines of Whitesboro? I also think they have one shot at landing there, but am not positive. I woke up at 2am CDT to watch and don't remember everthing I saw :laugh:

I believe it is something along the lines of Whitesboro? I also think they have one shot at landing there, but am not positive. I woke up at 2am CDT to watch and don't remember everthing I saw :laugh:

586345068[/snapback]

Whitesand Space Harbor, they just said on NASA TV and yeah it's only one shot there and at Cali. My mistake earlier.

edit> Nope, I was right originally, TWO shots at Cali, too. Just saw it on NASA TV.

Edited by bigbluepride35
Whitesand Space Harbor, they just said on NASA TV and yeah it's only one shot there and at Cali. My mistake earlier.

edit> Nope, I was right originally, TWO shots at Cali, too. Just saw it on NASA TV.

586345185[/snapback]

Not Mexico, NEW Mexico. My mistake. I was thinking to myself "Why on earth would Mexico have a landing stirp accessible to a space shuttle. And it's 2 at Kennedy, 2 at Edwards, and 1 at Whitesand. Thank you NASA TV.

Sorry about the double post :blush: I thought it was too long to edit my last one.

i think they'll no-go the second one too. i'm sure they're going to land in cali.

they said the reason is that a rain drop hitting the shuttle at over 400 mph can put a dent in the tiles. that's potentially thousands of tiles that would need replacing after landing. to me, it's a good idea to be more cautious about this.

one thing that i find kind of interesting is all of these people are freaking out about the safety concerns and how horrible nasa is for the disasters such as challenger and columbia and how the entire shuttle program needs to be redone and/or shut down and a whole new program needs to be thought of...

all of this, while at the same time, the current administration is not being very generous at all with the funding to NASA, probably because they're busy spending somewhere approaching $200 billion on Iraq, oh and by the way we happen to be approaching 2,000 casualties of american soldiers over there....

i really dont like getting all politcally jazzed up too often, but i couldn't help myself on this one...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Liene PixCut S1 Starter Kit gets a whopping 31% discount on Prime Day by Steven Parker Liene reached out to us to share another Prime Day exclusive deal that starts today on Amazon. It gives buyers a massive 31% off on the cost of this color sticker printer and cutting machine. It's basically an all-in-one sticker maker for DIY crafts, custom labels and gifts. It utilizes thermal dye-sublimation at 300 dpi, and offers precise "AI" auto-cutting. Here are some more of its highlights: All-in-One Convenience - Print and Cut in One Step. Say goodbye to the hassle of using separate machines. The PixCut S1 seamlessly integrates high-resolution photo printing and precise die cutting into one streamlined device. With just a few clicks on the user-friendly app, you can edit, print, and cut directly from your smartphone via Bluetooth. Create stickers in just 2 minutes! This all-in-one solution saves you time and effort, making your creative projects more enjoyable and efficient. AI Image Extraction & Precision Cutting - Unleash your creativity with the AI image extraction feature that automatically recognizes and extracts subjects from your photos. Then watch as the high-precision cutting system, guided by the same AI technology, perfectly follows every edge with pinpoint accuracy. This seamless AI-to-cut workflow ensures flawless results every time. Turn any moment into custom stickers with professional edges in minutes - just masterpieces made simple. High-Resolution Prints - Vivid and True-to-Life Colors. Utilizing thermal dye-sublimation technology, the PixCut S1 delivers stunning 300 dpi high-resolution prints with 16.7 million colors. Whether you're printing photos, stickers, or labels, you can expect vibrant, true-to-life color effects that make your creations stand out. Every detail is captured with precision, providing professional-quality results every time. AI Lab - Bring Your Imagination to Life. Upload a photo, pick a style from the Liene Photo App, and watch AI bring your vision to life instantly. Turn selfies into an anime character, a fantasy hero, or a festive holiday illustration — all with stunning realism. One style, endless versions of you. Print your AI art as custom stickers, unique gifts, or social media posts — perfect for avatars and DIY projects. No design experience required. Your creativity is just one click away from magic. Durable Stickers - Create Long-Lasting Creations .Thanks to the four-layer thermal dye-sublimation technology, the photopaper is automatically laminated during printing. Stickers produced by PixCut S1 are durable, waterproof and scratch-resistant, ensuring they remain vibrant and intactover time. Perfect for creating custom stickers, labels, and more that last. No Subscription. Just Pure Creativity. With the Liene app, available on mobile, tablet, and desktop. Unlock 40,000+ free images, fonts & elements (and growing), plus 2000+ ready-to-use templates for phone skins, lens stickers, ID cards, labels, name tags, journaling, and more. No paywalls, no hidden fees, just pure creativity. Turn any idea into a custom creation in minutes. Your imagination has no limits, neither should your software. This deal is for the Starter Kit, so what do you get? What's in the box PixCut S1 Photo Sticker Printer and Cutter x 1 Photo Sticker Cutter Ink Cartridge x 1 (36 sheets) Photo Paper 4"x6" (18 sheets) Sticker Paper 4"x7" (White) x 18 sheets Blade x 1 (Pre-installed) So in short everything you need to get printing and cutting. The Liene PixCut S1 has a 4.3 star rating after more than 1,000 reviews from customers, but we can't promise the landing page always sold this particular model, so do check out the reviews before purchasing. In any case Prime members are covered with a 30 day return or replacement should things not work out so great. Liene Pixcut S1 for $205.99 (was $299.99) 31% off Use code 15PIXCUT6 during checkout Although this is a Prime Day discount, the above code will stay live until June 30. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • https://www.tenforums.com/tuto...b-results-windows-10-a.html Check the comment dates. Some of them are as old as 2016.
    • I wonder how many are laid off for cost savings, and this being blamed on AI to make it sound less scary and bad, for a more positive "modern, with the times" spin for investors? Because Oracle is down 14% the past year. We're looking at a company struggling here. If AI would actually be working out so well for them that they can do massive layoffs, surely this would've been reflected the past year in their stock value?
    • AI is the beginning, wait until real robots replace more jobs, specifically jobs that require physical work.
    • AI is indeed eliminating jobs, and Oracle just proved it by Hamid Ganji There’s no question that AI has become the hottest trend in workplaces, and every company is trying to adopt AI-driven solutions across its operations. While some industry leaders repeatedly say AI won’t lead to massive layoffs, recent data suggest that AI is actually one of the main reasons some companies are reducing their workforce. According to Oracle’s annual regulatory filing, the company has laid off about 21,000 employees, or 13% of its workforce, amid increasing AI adoption. “The adoption and deployment of AI technologies across our operations have resulted, and may continue to result, in reductions to our workforce,” Oracle said in the filing. The software giant now has approximately 141,000 full-time employees, a notable decrease from 162,000 during the same period last year. Restructuring expenses, including severance payments, cost Oracle $1.84 billion in fiscal 2026. Additionally, around 49,000 Oracle employees were based in the U.S., while approximately 92,000 were employed internationally. Like many other companies, Oracle has fully embraced AI and concentrated much of its efforts on the technology. The company is also a key participant in the United States’ $500 billion Stargate Project, which aims to build multiple AI data centers across the country. When it comes to AI adoption and its impact on the workforce, opinions remain divided. NVIDIA CEO Jensen Huang, whose company has been one of the biggest beneficiaries of the AI boom, recently said in an interview that attributing job cuts to AI is a “lazy” narrative. “The narrative that connects AI to job loss, for many of the CEOs that are doing it – it is just too lazy. AI has just arrived, how is it possible they're already losing jobs?” Huang said. However, statistics and recent reports tell a different story. According to Layoffs.fyi, 196 tech companies have laid off about 119,800 employees so far this year. Reducing staff and replacing roles with AI agents could become one of the most significant trends in the job market in the years ahead.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      464
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      97
    4. 4
      Michael Scrip
      89
    5. 5
      neufuse
      70
  • Tell a friend

    Love Neowin? Tell a friend!