What alloys?


Recommended Posts

I have a choice of any of those.

When I was in the showroom 'Sword' looked really good and I said to look into the availability of those, on paper (Attached Image) they look pretty crap :pinch:

I like Vulcan, Mirage & Fusion.

What you think?

Added Picture of my car.

Alloys will be 15 Inch with 195/50 Tyres.

post-129969-1127658537_thumb.jpg

post-129969-1127658772_thumb.jpg

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/
Share on other sites

i can see ur number plate.

haha.

by the way, there all crap. either have factory standerd or dont bother.

586589595[/snapback]

HAHA, Big deal, what you going to do about it? Please :rolleyes:

I sense jealousy, Factory standard are 15 inch and very similar and are double the price, by the way.

cant you get soemthign slightly bigger on it ? If were gettign alloy sthey woulddnt be 15" , maybe on a punto you could get soem 17s on it ?

586589600[/snapback]

I could have 17 inches on it, But there way too expensive, Bigger = Look better. Smaller = Better handling.

Also, I want to keep the radius of the whole wheel similar to the current so not to affect my mph read out etc.

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586589628
Share on other sites

HAHA, Big deal, what you going to do about it? Please  :rolleyes:

I sense jealousy, Factory standard are 15 inch and very similar and are double the price, by the way.

I could have 17 inches on it, But there way too expensive, Bigger = Look better. Smaller = Better handling.

Also, I want to keep the radius of the whole wheel similar to the current so not to affect my mph read out etc.

586589628[/snapback]

yes im jelous of a punto with awful alloys on it.

I would rather get the bus. It would be faster, or do the alloys make it as fast as a ferrari? Cos im sure that why all these people spend thousands of ricing up there cars.

why dont they just go buy a nice car?!!

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586589649
Share on other sites

ive always been curious why people buy expensive rims for their pos cars

586589634[/snapback]

Expensive rims? These are Cheaps ones, compared to some that are ?700+.

POS of car? :sleep::

Sure, its no Ferarri, BMW, Audi, Volvo, Saab etc. But, I love it, Im 19 years of age and have a 2002 52 plate car which cost ?4,500.

I personally dont think im doing bad considering its my 2nd car.

Go troll somewhere else. Your ignorance and plain dumb ass comments are what makes Neowin a worse place to be day by day.

Nothing helpfull to say? Press the back button or click the Neowin logo, you DONT have to post your negative, bashing/trolling comments.... or maybe you enjoy belittleing people online, maybe it makes you feel good. Who knows? Who cares? Just dont bother in future because I shall just ignore your childish immature comment(s) which serve no purpose what so ever.

I see it a lot here, people do something and all they are get are negative and sometimes very offensive comments. Sure, negative critism is as good as positive, but this is not critism, its just plain immaturity and trolling because you can't stand to see someone else doing something that they like and you dont approve and/or understand it.

Accept this, people are different. Thats half your battle won. Now, be mature and do not reply to this message, If you do and its offensive/sarcasm I shall lose all respect for you and add you to my block/ignore list here. If you reply, I want an apology or your comment removed by yourself.

Additionally, buy a better car? Erm... how would you suggest I buy a "Better" car with ?311.99:) :) It was a 2nd hand car... I didnt choose the specification level, as above, Official Fiat Accesories, alloys are ?600+ and are very similar to ones I have choosen.

Anymore comments like these I shall ask a staff member to moderate and delete comments as they are all off topic and trolling.

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586589656
Share on other sites

You know what, I'm not sure of the backround of a Fiat, but I can be damn sure that it's waay better than a Saab. Do you even know why they call it a Saab? Because after getting it fixed at a shop and recieving the bill, that's all you can do is Saab. Now this is just based on how Saabs haven been like in the past, not sure what it is like now. Hope you enjoy your new rims, so lucky. :p

I want some new Iroc-Z rims for my S10. =(

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586590031
Share on other sites

Expensive rims? These are Cheaps ones, compared to some that are ?700+.

POS of car? :sleep::

Sure, its no Ferarri, BMW, Audi, Volvo, Saab etc. But, I love it, Im 19 years of age and have a 2002 52 plate car which cost ?4,500.

I personally dont think im doing bad considering its my 2nd car.

Go troll somewhere else. Your ignorance and plain dumb ass comments are what makes Neowin a worse place to be day by day.

Nothing helpfull to say? Press the back button or click the Neowin logo, you DONT have to post your negative, bashing/trolling comments.... or maybe you enjoy belittleing people online, maybe it makes you feel good. Who knows? Who cares? Just dont bother in future because I shall just ignore your childish immature comment(s) which serve no purpose what so ever.

I see it a lot here, people do something and all they are get are negative and sometimes very offensive comments. Sure, negative critism is as good as positive, but this is not critism, its just plain immaturity and trolling because you can't stand to see someone else doing something that they like and you dont approve and/or understand it.

Accept this, people are different. Thats half your battle won. Now, be mature and do not reply to this message, If you do and its offensive/sarcasm I shall lose all respect for you and add you to my block/ignore list here. If you reply, I want an apology or your comment removed by yourself.

Additionally, buy a better car? Erm... how would you suggest I buy a "Better" car with ?311.99:) :) It was a 2nd hand car... I didnt choose the specification level, as above, Official Fiat Accesories, alloys are ?600+ and are very similar to ones I have choosen.

Anymore comments like these I shall ask a staff member to moderate and delete comments as they are all off topic and trolling.

586589656[/snapback]

I asked a question. I realize now I didn?t put a question mark, but I intended it as a question. You did somewhat answer my question but in the process decided to bash me for calling your car a piece of ****.

I never said you needed to buy a new car. You pulled that totally out of the air. However, my original question was why you would want to put ?300 worth of aesthetics into a car that looks like crap. I too drive a piece of **** car. I just can?t see myself spending that much money to make my car look like a piece of **** with shiny wheels.

I do not see my question as being 'dumb ass' as you put it. You?re putting serious thought into buying these rims and I ask only because i am curious. Yes, I am ignorant to the answer of my question.. but only because you wish to insult me instead of answering me.

If you feal threatened by my questions, then maybe you should block me and every other person who askes you questions that you feel insecure about answering.

If you want a staff member to delete my posts because I hurt your feelings and becuase you feel my question of "why do people put these on such a car" is off topic, feel free because I doubt you will ever answer the question anyway.

Cool down, take a chill pill and try to enjoy life.

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586590697
Share on other sites

Use google how alloy wheels are better then steel wheels.

Basically, they look better.

The alloy wheel allows better cooling to disc brakes by dissipating heat thus reducing brake fade.

They are lighter then their steel counter parts.

In general, alloy wheels are lighter, more attractive, and better at dissipating brake heat that their steel counterparts. They tend to be available in standardised sizes which means competition amongst tyre vendors giving low prices and good availability!

Fitting alloy wheels normally reduces your car's unsprung weight  - in layman's terms this means a reduction in rotating mass at the ends of your suspension components, giving you improved steering feel and greater braking response.

Also

I never said you needed to buy a new car. You pulled that totally out of the air. However, my original question was why you would want to put ?300 worth of aesthetics into a car that looks like crap. I too drive a piece of **** car. I just can?t see myself spending that much money to make my car look like a piece of **** with shiny wheels.

Was to sam_goffe.

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586590723
Share on other sites

Use google how alloy wheels are better then steel wheels.

Basically, they look better.

The alloy wheel allows better cooling to disc brakes by dissipating heat thus reducing brake fade.

They are lighter then their steel counter parts.

Also

Was to sam_goffe.

586590723[/snapback]

thank you for the answer, and im sorry im hurt your feelings :cool:

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586590739
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!