What alloys?


Recommended Posts

I have a choice of any of those.

When I was in the showroom 'Sword' looked really good and I said to look into the availability of those, on paper (Attached Image) they look pretty crap :pinch:

I like Vulcan, Mirage & Fusion.

What you think?

Added Picture of my car.

Alloys will be 15 Inch with 195/50 Tyres.

post-129969-1127658537_thumb.jpg

post-129969-1127658772_thumb.jpg

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/
Share on other sites

i can see ur number plate.

haha.

by the way, there all crap. either have factory standerd or dont bother.

586589595[/snapback]

HAHA, Big deal, what you going to do about it? Please :rolleyes:

I sense jealousy, Factory standard are 15 inch and very similar and are double the price, by the way.

cant you get soemthign slightly bigger on it ? If were gettign alloy sthey woulddnt be 15" , maybe on a punto you could get soem 17s on it ?

586589600[/snapback]

I could have 17 inches on it, But there way too expensive, Bigger = Look better. Smaller = Better handling.

Also, I want to keep the radius of the whole wheel similar to the current so not to affect my mph read out etc.

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586589628
Share on other sites

HAHA, Big deal, what you going to do about it? Please  :rolleyes:

I sense jealousy, Factory standard are 15 inch and very similar and are double the price, by the way.

I could have 17 inches on it, But there way too expensive, Bigger = Look better. Smaller = Better handling.

Also, I want to keep the radius of the whole wheel similar to the current so not to affect my mph read out etc.

586589628[/snapback]

yes im jelous of a punto with awful alloys on it.

I would rather get the bus. It would be faster, or do the alloys make it as fast as a ferrari? Cos im sure that why all these people spend thousands of ricing up there cars.

why dont they just go buy a nice car?!!

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586589649
Share on other sites

ive always been curious why people buy expensive rims for their pos cars

586589634[/snapback]

Expensive rims? These are Cheaps ones, compared to some that are ?700+.

POS of car? :sleep::

Sure, its no Ferarri, BMW, Audi, Volvo, Saab etc. But, I love it, Im 19 years of age and have a 2002 52 plate car which cost ?4,500.

I personally dont think im doing bad considering its my 2nd car.

Go troll somewhere else. Your ignorance and plain dumb ass comments are what makes Neowin a worse place to be day by day.

Nothing helpfull to say? Press the back button or click the Neowin logo, you DONT have to post your negative, bashing/trolling comments.... or maybe you enjoy belittleing people online, maybe it makes you feel good. Who knows? Who cares? Just dont bother in future because I shall just ignore your childish immature comment(s) which serve no purpose what so ever.

I see it a lot here, people do something and all they are get are negative and sometimes very offensive comments. Sure, negative critism is as good as positive, but this is not critism, its just plain immaturity and trolling because you can't stand to see someone else doing something that they like and you dont approve and/or understand it.

Accept this, people are different. Thats half your battle won. Now, be mature and do not reply to this message, If you do and its offensive/sarcasm I shall lose all respect for you and add you to my block/ignore list here. If you reply, I want an apology or your comment removed by yourself.

Additionally, buy a better car? Erm... how would you suggest I buy a "Better" car with ?311.99:) :) It was a 2nd hand car... I didnt choose the specification level, as above, Official Fiat Accesories, alloys are ?600+ and are very similar to ones I have choosen.

Anymore comments like these I shall ask a staff member to moderate and delete comments as they are all off topic and trolling.

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586589656
Share on other sites

You know what, I'm not sure of the backround of a Fiat, but I can be damn sure that it's waay better than a Saab. Do you even know why they call it a Saab? Because after getting it fixed at a shop and recieving the bill, that's all you can do is Saab. Now this is just based on how Saabs haven been like in the past, not sure what it is like now. Hope you enjoy your new rims, so lucky. :p

I want some new Iroc-Z rims for my S10. =(

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586590031
Share on other sites

Expensive rims? These are Cheaps ones, compared to some that are ?700+.

POS of car? :sleep::

Sure, its no Ferarri, BMW, Audi, Volvo, Saab etc. But, I love it, Im 19 years of age and have a 2002 52 plate car which cost ?4,500.

I personally dont think im doing bad considering its my 2nd car.

Go troll somewhere else. Your ignorance and plain dumb ass comments are what makes Neowin a worse place to be day by day.

Nothing helpfull to say? Press the back button or click the Neowin logo, you DONT have to post your negative, bashing/trolling comments.... or maybe you enjoy belittleing people online, maybe it makes you feel good. Who knows? Who cares? Just dont bother in future because I shall just ignore your childish immature comment(s) which serve no purpose what so ever.

I see it a lot here, people do something and all they are get are negative and sometimes very offensive comments. Sure, negative critism is as good as positive, but this is not critism, its just plain immaturity and trolling because you can't stand to see someone else doing something that they like and you dont approve and/or understand it.

Accept this, people are different. Thats half your battle won. Now, be mature and do not reply to this message, If you do and its offensive/sarcasm I shall lose all respect for you and add you to my block/ignore list here. If you reply, I want an apology or your comment removed by yourself.

Additionally, buy a better car? Erm... how would you suggest I buy a "Better" car with ?311.99:) :) It was a 2nd hand car... I didnt choose the specification level, as above, Official Fiat Accesories, alloys are ?600+ and are very similar to ones I have choosen.

Anymore comments like these I shall ask a staff member to moderate and delete comments as they are all off topic and trolling.

586589656[/snapback]

I asked a question. I realize now I didn?t put a question mark, but I intended it as a question. You did somewhat answer my question but in the process decided to bash me for calling your car a piece of ****.

I never said you needed to buy a new car. You pulled that totally out of the air. However, my original question was why you would want to put ?300 worth of aesthetics into a car that looks like crap. I too drive a piece of **** car. I just can?t see myself spending that much money to make my car look like a piece of **** with shiny wheels.

I do not see my question as being 'dumb ass' as you put it. You?re putting serious thought into buying these rims and I ask only because i am curious. Yes, I am ignorant to the answer of my question.. but only because you wish to insult me instead of answering me.

If you feal threatened by my questions, then maybe you should block me and every other person who askes you questions that you feel insecure about answering.

If you want a staff member to delete my posts because I hurt your feelings and becuase you feel my question of "why do people put these on such a car" is off topic, feel free because I doubt you will ever answer the question anyway.

Cool down, take a chill pill and try to enjoy life.

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586590697
Share on other sites

Use google how alloy wheels are better then steel wheels.

Basically, they look better.

The alloy wheel allows better cooling to disc brakes by dissipating heat thus reducing brake fade.

They are lighter then their steel counter parts.

In general, alloy wheels are lighter, more attractive, and better at dissipating brake heat that their steel counterparts. They tend to be available in standardised sizes which means competition amongst tyre vendors giving low prices and good availability!

Fitting alloy wheels normally reduces your car's unsprung weight  - in layman's terms this means a reduction in rotating mass at the ends of your suspension components, giving you improved steering feel and greater braking response.

Also

I never said you needed to buy a new car. You pulled that totally out of the air. However, my original question was why you would want to put ?300 worth of aesthetics into a car that looks like crap. I too drive a piece of **** car. I just can?t see myself spending that much money to make my car look like a piece of **** with shiny wheels.

Was to sam_goffe.

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586590723
Share on other sites

Use google how alloy wheels are better then steel wheels.

Basically, they look better.

The alloy wheel allows better cooling to disc brakes by dissipating heat thus reducing brake fade.

They are lighter then their steel counter parts.

Also

Was to sam_goffe.

586590723[/snapback]

thank you for the answer, and im sorry im hurt your feelings :cool:

Link to comment
https://www.neowin.net/forum/topic/376945-what-alloys/#findComment-586590739
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Sounds like the debloated build you are running is missing some components that the Photos app and Snipping Tool rely on.
    • Apparently, Microsoft doesn't use water in their taps, washrooms or clean their facility. /sarc
    • Wow, throwback.  VERY VERY briefly - but realised that it wasn't the language I needed for the tasks I was taking on.
    • Apple and Tesla trade secrets reportedly exposed following a Tata Electronics cyberattack by Hamid Ganji Image via Depositphotos.com Tata Electronics has confirmed that it detected a cybersecurity incident in some of its systems. The Indian company is a manufacturing partner of both Apple and Tesla, and the incident may have exposed some trade secrets belonging to the two American companies. The World Leaks ransomware group is said to be behind the attack, and it has reportedly posted up to 200,000 files on the dark web, including component designs and specification documents related to Apple and Tesla products. Tata Electronics told Reuters that its response protocols were deployed immediately and that the “incident has had no impact on our operations across businesses, which remain unaffected.” The ransomware group reportedly sent a ransom demand to Tata Electronics, while Apple has launched an investigation into the incident. World Leaks claims it stole more than 200,000 files totaling over 630GB from Tata Electronics. Some database files on the ransomware group’s website are titled "com.apple.factorydata," which could refer to Apple’s iPhone production operations in India. Moreover, some documents reportedly contain material specifications and quality inspection standards for iPhone circuit board components. However, Apple is not the only affected company. A folder found in the World Leaks database is titled "NV36 Chargeport Controller - North America," which may refer to Tesla Model Y components. Additionally, other files in the database reportedly contain drawings related to Tesla’s Project Highland, the internal codename for the EV maker’s updated Model 3 sedan. To support the authenticity of the stolen files, World Leaks has published documents containing footers that read: "This document contains proprietary and confidential information of Apple Inc." and "information contained herein is deemed confidential, proprietary, and a trade secret of Tesla Inc." Cybersecurity researcher Rajshekhar Rajaharia told Reuters that the database also contains emails, event logs spanning several years, and passport copies of employees, including foreign nationals. Both Tesla and Apple have declined to comment on the scale of the incident.
    • Last time I used Pascal was in college about 40 yrs ago, programmed an inventory database for my exam.
  • Recent Achievements

    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
    • Dedicated
      tuben earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      487
    2. 2
      +Edouard
      204
    3. 3
      PsYcHoKiLLa
      95
    4. 4
      Michael Scrip
      91
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!