Sony Blu-ray to use old Mpeg-2 format


Recommended Posts

Old habits must really die hard for Sony: once more proving the divisiveness between their content and technology branches, Sony Pictures? senior vice president of advanced technology Don Eklund apparently said, ?Advanced (formats) don?t necessarily improve picture quality. Our goal is to present the best picture quality for Blu-ray. Right now, and for the foreseeable future, that?s with MPEG-2.? Quick backgrounder: the Moving Pictures Experts Group who created MPEG-2 later created MPEG-4 AVC (aka h.264), which is spec for both Blu-ray and HD DVD (as well as Microsoft?s VC-1, among other codecs) and was designed to be technically superior to MPEG-2, and to ultimately replace it. It?s no big deal that one movie studio is choosing not to use a standard, proven, hi def-centric codec, but how poorly does it reflect specifically on Sony that their SVP of advanced tech doesn?t get it that h.264 offers the same image quality as MPEG-2, but at lower bitrates, or offers a high def picture at the same bitrates as the old standard? Ultimately this isn?t a big deal since they?ll surely change their mind eventually, but it makes us a little uneasy about who?s at the wheel over there, to say the least.

http://www.engadget.com/entry/1234000293070178/

Politic aside... what they said is true. Mpeg 2 Still provide the best quality at those high bitrate.

No it doesn't! Logically, newer codecs would produce the same quality image at lower bitrates than an older codec. MPEG2 is old by today's standards, and future technology should use the best technology of today as its base. Sony should have chosen MPEG4, plain and simple. There's no reason not to.

What's probably happening is that Sony is realizing the drives are going to be expensive, and they don't want manufacturers complaining about having to use (expensive) new drives and (expensive) new decoders, so Sony cuts out one of the expenses by using older decoders.

I would think HD MPEG 2 would be eaiser to decode than HD MPEG 4. MY computer can play HD MPEG 2 files fine (HDTV Wonder) but HD MPEG 4 is a big problem along with WMV-HD. There is a lot of room so no HD movie should fill up a whole Blu-ray disc. I can get about 8 GB in 1 hour and that with 5.1 sound also.

Im sure that soon it will play both mpeg2 and mpeg 4 formats also, but that depends on the player

Politic aside... what they said is true. Mpeg 2 Still provide the best quality at those high bitrate.

:rofl:

Most definitely it doesn't - MPEG2 has a very poor quality compression scheme compared to the H.264 (Also known as MPEG4).

If they don't change their minds, Blue Ray is doomed. HD-DVD would probably win anyway - it's not backed by a single manufacturer, it's easier for manufacturers to upgrade current manufacturing equipment, it has the features that content providers want, it has a name that consumers can identify more easily (as a sucessor of DVD), and has more industry support (eg. Microsoft). Even if Blue Ray is technically superior in storage capacity, HD has the features.

But do you know have hard it is even for quite a modern computer to render a HD h.264 (To just prove my point a few of the trailer on the apple website wil only run smoothly on a Dual-core Dual-processor Power Mac G5)so think about the commerical DVD players (Well Blu-ray players) their hardware isn't as powerful as desktop PC so most players would prob stutter and stall while trying to play HD h.264 films.

But do you know have hard it is even for quite a modern computer to render a HD h.264 (To just prove my point a few of the trailer on the apple website wil only run smoothly on a Dual-core Dual-processor Power Mac G5)so think about the commerical DVD players (Well Blu-ray players) their hardware isn't as powerful as desktop PC so most players would prob stutter and stall while trying to play HD h.264 films.

Erm, many of the 720p trailers that are encoded in h.264 at Apple Traillers run fine on my Sempron 2600.

No it doesn't! Logically, newer codecs would produce the same quality image at lower bitrates than an older codec. MPEG2 is old by today's standards, and future technology should use the best technology of today as its base. Sony should have chosen MPEG4, plain and simple. There's no reason not to.

What's probably happening is that Sony is realizing the drives are going to be expensive, and they don't want manufacturers complaining about having to use (expensive) new drives and (expensive) new decoders, so Sony cuts out one of the expenses by using older decoders.

nope what iwod said in this case is correct.

their hardware isn't as powerful as desktop PC so most players would prob stutter and stall while trying to play HD h.264 films.

You're talking apples (heh) and oranges here.

A set top box can destroy, and I mean totally obliterate, your PC in video, audio and other things because they have chips that are specially designed for the job - a good example is a digital tv (IPTV) box here that has approximately 100MHz "CPU" yet it can decode video/audio/transport stream at the same speed as the fastest PC you can get from the store.

isnt mpeg4 DivX and Xvid?

No, MPEG4 is a standard that defines other sub-standards such as Video, Audio, Subtitles etc. AVC/H264 is the codec that takes care of the video part of it.

DivX and XViD are not the same as H264.

nice work orangesoul with more anti-sony postings.. let me see mpeg2? oh wait yes uncompressed meaning FULL 100% quality, no distortion, no nothing. They dont need AVC, or Mpeg4... Mpeg2 + HD Audio will make thing extremely nice, and that goes for the movie makers since they can just take there mpeg2 video from there hd edits and just save it to a blu-ray.

Also note, mpeg-2 already has HD standard formats that work nicely.. I think more of this story has to do with the movie companies wanting mpeg2 still since they can use existing equipment to do there work. Instead of having to update to mpeg4, which requires a lot more computer power to edit the film, and you cant sit there and tell me it doesn't, because my friends system with a x1800xt, amd 64 4800+, 2g of ram, and around 500g of hdd space, has many problems doing Mpeg4 (thats also including avc), anything above the normal 480, he starts to have stuttering, glitches, and it takes a good 8 hours to encode. While on the mpeg 2 side, he can encode a perfect 720p video in 2 hours and be enjoying it with full fps, quality, and everything.

Edited by DeadOnArrival

They should adopt a newer mpeg4 standard, h.264 is a good choice but there also some other good mpeg4 ones out there.

The other thing about mpeg2 is sony has a ton of patents related to mpeg2, so they profit from staying at mpeg2.

I would love to have Blue-Ray hardware and HD-DVD software slightly less restrictive anti-copy scheme.

There is no such thing as uncompressed MPEG2.

My thoughts exactly. :blink:

Anyway, at these resolutions and bitrates, its unlikely there'll be any picture quality difference between MPEG-2 and 4, no? Eh, I'll just wait till both Blu-Ray and HD-DVD hit the market and see what the masses adopt.

If they don't change their minds, Blue Ray is doomed. HD-DVD would probably win anyway - it's not backed by a single manufacturer, it's easier for manufacturers to upgrade current manufacturing equipment, it has the features that content providers want, it has a name that consumers can identify more easily (as a sucessor of DVD), and has more industry support (eg. Microsoft). Even if Blue Ray is technically superior in storage capacity, HD has the features.

Blu-ray is the one with the most support. Sony, Philips, Panasonic, LG, Pioneer, Sharp, Apple, Dell, and the list goes on. As for HD-DVD it's far less: Toshiba, MS, Intel, HP (which backs both) and a couple of others. With regards to features, both are pretty much teh same. The only major difference is with the interactive features. HD-DVD will be based on MS's XML format and Blu-ray on Java (and don't even mention Java's non-existant performance problems). Now as for Blu-ray disks being cheaper to manufacture, it's true and I can't argue there.

But do you know have hard it is even for quite a modern computer to render a HD h.264 (To just prove my point a few of the trailer on the apple website wil only run smoothly on a Dual-core Dual-processor Power Mac G5)so think about the commerical DVD players (Well Blu-ray players) their hardware isn't as powerful as desktop PC so most players would prob stutter and stall while trying to play HD h.264 films.

I can play 720p video perfectly (< 100% CPU usage and no frame-dropping) on my crappy 2.4 P4 with no hardware acceleration (stupid GF2). With a slightly better CPU or an accelerating GFX card, I should be able to plat 1080p with no problems.

As for commercial DVD players being able to handle h264, it should be no problem. The decoding chips in those players use specialized processors to decode video. They can run at a much lower clock speed and get better decoding performance than our general-purpose x86 or PPC chips.

isnt mpeg4 DivX and Xvid?

why having 2 and sometimes 3 names for the same codec damn

Yes, Xvid and DivX are MPEG4. Specifically, it's MPEG4-part 2. H.264 is MPEG4-part 10. Confused yet? Check out AAC and it's abundance of profiles.

Look. The most important aspect of a codec is somtimes not about its technology, but how much time people spend to tune the codec. Mpeg 4 may in theory be better, but mpeg 2 has been around for a long time and on a good encoder at high bitrate nothing bit it.

The same reason why Mp3 isn't doomed .. yet.

I can play 720p video perfectly (< 100% CPU usage and no frame-dropping) on my crappy 2.4 P4 with no hardware acceleration (stupid GF2). With a slightly better CPU or an accelerating GFX card, I should be able to plat 1080p with no problems.

Yeah, but what codec? I can play WMV 720p video perfectly fine, with only about 50% CPU usage, but if I try the same with 720p H.264 QT videos, my PC really chugs.

http://erg.abdn.ac.uk/research/future-net/...ideo/mpeg2.html

H.264, or MPEG-4 Part 10, is a digital video codec standard.

http://en.wikipedia.org/wiki/H.264

The question is has anybody here sat below a $40,000 Runco Video Projector and compared HD MPEG2 versus H.264 ?

Edited by hardgiant
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Doesn't even need a UI for point 2 - use some sort of JSON/XML container - because MOST users won't even bother.
    • Legit concern or publicity stunt considering this is the first time I'm hearing the name?
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      487
    2. 2
      PsYcHoKiLLa
      263
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!