Recommended Posts

1. Install msn 7.5

2. Backup/Copy The

%homepath%/Program Files/MSN Messenger

Map to something like C:

3. Install Windows Live Messenger

4. YOu can use both now:) and if want to use wlm and msn on the same time i think to polygamy those 2 will work ;)

Thanks, that worked.

I should of realised how to do it, I tried renaming the MSN folder and leaving it in the program files directory but it must have to be moved out of their tottally :blush:

I see your looking for an WLM invite, when and if I get some I will be sure to send you one.

:)

I'm not an official tester, but I wanted to try out WLM8 without uninstalling MSN 7.5.

What I did:

Extracted the .msi file from the downloaded file using Winrar.

Used Qwerty.msi] to extract all the MSN files from the .msi file.

Just ran msnmsgr.exe from the location I extracted the files to.

  • 3 weeks later...

Yes, Install MSN Messenger 7.5 then copy the folder "C:\Program Files\MSN Messenger" and paste it somewhere else.

Uninstall MSN Messenger 7.5 from Add/Remove Programs and install WLM 8.0. Then just create shortcuts to msnmsgr.exe inside that folder you copied (Y)

Wouldn't it take up a lot of memory resources to run two messengers at the same time like that, because WLM 8 according to what i've heard already takes a nice chunk of memory?

He might not to run them both at the same time though. Just have them both installed at the same time, that way he can test and play around with WLM for a bit and yet still use MSN 7.5 as his main messenger when he needs to.

just copy ur msn7.5 folder and dump it somewhere and then install WLM, its been asked b4!

well, this did not work for me. After I did as you instructed, it just depends which messenger I opened up first after installing 8.0-- if 7.5, then it'll just be 7.5 even when I open the exe file under the 8.0 folder; if 8.0, then it'll always be the 8.0 version even when I try to click the 7.5 application file.

well, this did not work for me. After I did as you instructed, it just depends which messenger I opened up first after installing 8.0-- if 7.5, then it'll just be 7.5 even when I open the exe file under the 8.0 folder; if 8.0, then it'll always be the 8.0 version even when I try to click the 7.5 application file.

you might have to run the polygamy patch on one of the clients... Not sure, but i applied it to the 7.5 one, and i think it works when I open 7.5, then WLM... i'll check right now... lol

Ok... here's how it works for me... polygamy patch has been applied to 7.5, then i copied the directory to desktop, uninstalled 7.5... Then I installed wlm.

When i want both clients open, i first open wlm, then I open 7.5, and it works...

heres the ss to prove i done it and its not photoshopd :p

http://img213.imageshack.us/img213/9396/omgowned0mq.jpg

i know its older version of WLM but it worked when i updated it still to latest version and i know im running the patch coz no1 will give me invite to beta.

u go like this

create a program files file in another drive on ur computer if you have more then one outside of C:

like X:\Program Files\MSN Messenger

then install Windows Live Messenger in default C:\program files\MSN Messenger then go into that folder copy all the files and then go to X:\Program Files\MSN Messenger and paste all files from the ones you copied into the new folder.

then you go back to the old default directory u originally installed it to delete all files from it then make sure its not listed in your add/remove programs list.

then you go download or open installer for 7.5 and install it to C:\program files\MSN Messenger

then put polygamy on 7.5

and then should work

(X: being drive outside of your actual windows partition with real program files folder in it)

(C: being drive where your actual windows program files folder is installed)

i think windows live messenger latest install to MSN Messenger folder im not quite sure but should work anyhow. hope this cleaned everyone on how to do it there probably is another way but this is how i done it. :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • We have disabled advertising in the forums for now for an undetermined period. If you feel like you get a lot of value out of the site please do whitelist ads on the news articles, and/or consider getting a subscription, we offer two tiers, one at: $14 per year (support the site for just over a dollar a month) or the $28/year tier (just over $2/month) that disables advertising and affiliate link tracking throughout the site (so also on the news side). We also have a 'Buy us a coffee' page if you just want to make a one-time donation. I am not mincing words when I say it is becoming harder and harder to monetize publications like Neowin, it's a fact of life that when we can no longer afford to pay for everything we'll go like many other sites already have. It doesn't have to cost you anything There are other ways to support Neowin too, like posting on topic content in the forums (technical support/questions/helping others) and sharing our news articles.. this costs nothing but your time and is just as important as subscribing or making a monetary donation! Anyway thanks for your time and continued support of Neowin. Now in our 26th year, and hopefully many more! For all the lurkers out there that whitelist us, make a free member account, and see fewer (only inline) ads on the news side  
    • BATorrent 3.0.2 by Razvan Serea BATorrent is a lightweight, open-source BitTorrent client built with modern C++ and Qt 6, offering a clean, fast, and privacy-focused alternative to traditional torrent apps. It supports magnet links, .torrent files, resume data, sequential downloading, per-file priorities, and even imports from qBittorrent. Power users benefit from integrated RSS auto-download with regex filtering, duplicate detection, and automatic tracker lists from Stremio. Streaming is seamless thanks to auto-detected players like VLC and IINA. BATorrent includes robust VPN tools—interface binding, auto-detection for WireGuard-based services like Mullvad and NordLynx, kill switch, proxy support, and IP filtering. A full WebUI enables remote control, while integrations with Plex, Jellyfin, and Emby automate library updates. With themes, speed scheduling, system-tray alerts, and cross-platform support for Windows, Linux, and macOS, BATorrent delivers a polished, high-performance torrenting experience. BATorrent features: Core .torrent file and magnet link support Resume data — picks up where you left off after restart Import torrents from qBittorrent Create .torrent files from any file or folder Sequential download mode Per-file priority control (skip, low, normal, high) Seed ratio limits with auto-pause DHT, PEX, UPnP, NAT-PMP RSS Auto-Download Subscribe to RSS feeds — automatically download new torrents as they appear Regex filters — match only what you want (e.g. 1080p|720p, S01E\d+) Per-feed settings — custom save path, check interval (5–1440 min), enable/disable Auto-download — matched items are downloaded automatically in the background Supports magnet links, .torrent URLs, and tags Tray notifications when items are auto-downloaded Duplicate detection — never downloads the same item twice Stremio Stremio Addon System pre-installed — works out of the box Auto tracker list from ngosang/trackerslist Streaming Play while downloading — stream video files before the download is complete Supports mp4, mkv, avi, mov, wmv, flv, webm, m4v, ts Auto-detects installed players (VLC, IINA, system default) VPN & Privacy Interface binding — lock torrent traffic to a specific network interface (e.g. tun0) Auto VPN detection — identifies VPN interfaces (tun, tap, WireGuard, Mullvad, NordLynx, ProtonVPN) Kill switch — automatically pauses all torrents if the VPN interface drops Auto-resume — resumes only the torrents paused by the kill switch when VPN reconnects Proxy support — SOCKS5 and HTTP proxy with optional authentication IP filtering — load P2P blocklists to block unwanted IP ranges Protocol encryption (enabled / forced / disabled) WebUI Remote management — control torrents from any browser at http://localhost:8080 REST API with JSON responses Add torrents via magnet link or .torrent upload Pause, resume, remove torrents remotely View peers and files per torrent Dark theme matching the desktop app HTTP Basic Auth with SHA-256 password hashing Configurable port and remote access (localhost vs 0.0.0.0) Interface 3 themes: Dark, Light, Midnight (bat/vampire aesthetic) Real-time speed graph Detailed panel with tabs: General, Peers, Files, Trackers Filter bar: search by name, filter by state (Active, Downloading, Seeding, Paused, Finished) Drag & drop .torrent files and magnet links Drag & drop reorder in torrent list System tray with notifications (download complete, kill switch events, RSS auto-downloads) Splash screen with bat animation Bilingual: English and Portuguese (BR), auto-detected from system locale Bandwidth Scheduler Alternative speed limits — set different download/upload limits on a schedule Time range — configure active hours (e.g. 01:00 to 07:00), supports overnight ranges Per-day control — choose which days of the week the schedule applies Automatically switches between normal and alternative speeds Media Server Integration Plex — automatically trigger library scan when a download completes Jellyfin / Emby — same automatic library refresh via API Configure server URL and authentication token/key in Settings System Cross-platform: Windows, Linux, macOS Auto-shutdown — automatically shut down PC when all downloads complete (60s cancellable countdown) Auto-update system (AppImage on Linux, installer on Windows, DMG on macOS) CLI arguments: pass .torrent files or magnet: URIs directly Keyboard shortcuts: Space to toggle pause, Ctrl+A to select all, Ctrl+O to open BATorrent 3.0.2 changelog: Phone pairing & WebUI The browser WebUI was reskinned to match the desktop app — same dark palette, Inter font, flat surfaces, the real BATorrent logo (it was a random bat before), and a proper magnet icon. It now looks like the same product, not a separate dashboard. Pairing is one tap and zero typing: the generated WebUI password is now copyable, and the QR code carries the credentials — scanning it from your phone logs straight in (no typing the IP or password), then drops the credentials from the address bar. Search Two new providers: RuTor (CIS sources, no login, via a public TorAPI relay) and Torrents-CSV. Results are sorted by seeders (healthiest first), and each search now times out after 15 s so one dead provider can't hang the UI. Files & trackers Per-file priority is back: right-click a file in the detail panel to set Skip / Low / Normal / High. Rename an individual file inside a torrent (double-click or the file menu), separate from renaming the torrent. Remove a tracker from a torrent (the ✕ on a tracker row); adding was already there. Smart Paste on Ctrl+V — paste a magnet, a 40-char info-hash, or a .torrent URL straight from the clipboard and it's added immediately (text fields still paste text normally). Covers & titles Anime fansub naming ([Group] Title - NN) now resolves to the right show. Audio channel layouts in titles (DDP5.1, 7.1, …) are stripped so they don't pollute cover matching. Under the hood The legacy QWidget interface is gone. QML had been the only UI since 3.0.0 (reachable old code lived behind a hidden --legacy flag); with parity confirmed, the entire QWidget layer — main window, every dialog, the theme manager — was removed (~13,400 lines). The four restored actions above were features that backend already supported but the QML port had never wired. macOS: the WebUI password hash moved out of the keychain into app settings, so launching the app no longer pops a login-keychain password prompt on unsigned builds. The actual password still lives in the keychain. Cleanup: ~400 orphaned translation strings and a batch of dead code removed; internal duplication collapsed; an ARCHITECTURE.md added for contributors. Unit / security / memory tests and the ASan/UBSan/TSan sanitizers stay green. Download: BATorrent 3.0.2 | 30.5 MB (Open Source) Download: BATorrent Portable | 42.3 MB Links: BATorrent Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • How about a global switch to turn the awful things off instead of a registry hack? Then everyone wins.
    • This doesn't strike me as so shocking when... " IT admins do have some control over this rollout. If they choose to opt out, devices in their tenant won't automatically get the dreaded Copilot app"
  • Recent Achievements

    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      475
    2. 2
      PsYcHoKiLLa
      262
    3. 3
      Skyfrog
      79
    4. 4
      ATLien_0
      60
    5. 5
      FloatingFatMan
      60
  • Tell a friend

    Love Neowin? Tell a friend!