FORCE slow USB drives work READYBOOST in vista


Recommended Posts

Windows ReadyBoost is a great technology, caching things on USB drives to improve system performance, but Windows Vista insists on checking the drives for certain speed requirements before enabling the feature. If you have a USB drive that is just a hair to slow to beat the test, or you want to use an external hard drive (slower speed, loads of cache space), Matt Rajca posts at Channel 9 how you can force Vista to let you use ReadyBoost on an unsupported device, whether it wants to or not :

1. Plug in the device.

2. Open the Readyboost tab on the device properties.

3. Select ?Do not retest this device?

4. Unplug the device

5. Open regedit (start->run->regedit)

6. Expand - HKLM (Local Machine)->SOFTWARE->Microsoft->Windows NT->CurrentVersion->EMDgmt

7. Find your device.

8. Change Device Status to 2

9. Change ReadSpeedKBs to 1000

10. Change WriteSpeedKBs to 1000

11. Plug in the device.

12. Enable Readyboost!!!!

That may be false for you, not everyone. It depends where a person's bottleneck is. If the bottleneck is down to a lack of memory, then a slightly slower amount of extra memory will help. However if you already have lots of memory and want to speed up your system by preventing certain things being swapped to disk, then a slower usb device will not be for you and will actually slow your system down.

I would normally stear clear of arguments like these but:

-This could be an advantageous thing to do if you don't have enough system memory to run smoothly

-If however, Windows writes to the USB memory as opposed to the HD because it wants to reduce caching to the HD due to higher speed USB device, then having a low speed device in this place will cause system slowing, especially in program loading.

Chris

The idea is that flash drives are faster than hard drives, so storing a page file on a flash device will be faster than storing it on your HD, but if your thumb drive is slower than your HD, all you're doing is slowing the paging down (i would assume Windows will store it on the faster device, regardless of what kind it is)

Well vista has a strange kind of memory management.

I first installed vista on 415MB Ram (yes setup allows), and vista always used around 280MB (physical) ram

Now i have 512MB Ram (just added some, no other hardware or software change) and vista suddenly always uses 380MB Ram.

Vista just places as much files in the Physical ram as possible. If you launch a program parts of the kernel system will be moved to the paging file to make space for your own programmes. This feature has a name but i forgot it :D

Theres an eaisier way then the registry hack (which I just saw posted over at Vista Bable also, you must be getting around some). Anyway, theres an eaisier way:

How to actually determine if your USB device will work with ReadyBoost and how to make it work if it will - even if Vista told you other wise.

Theres an eaisier way then the registry hack (which I just saw posted over at Vista Bable also, you must be getting around some). Anyway, theres an eaisier way:

How to actually determine if your USB device will work with ReadyBoost and how to make it work if it will - even if Vista told you other wise.

Theres an eaisier way then the registry hack (which I just saw posted over at Vista Bable also, you must be getting around some). Anyway, theres an eaisier way:

How to actually determine if your USB device will work with ReadyBoost and how to make it work if it will - even if Vista told you other wise.

ready boost is made for small chunks of data 4k 8k flash memory is faster at reading little random chunks than a harddrive is. its about 2500kb/s random read and 1750kb/s random write you need for it to work.

this has a lot of info about it

http://blogs.msdn.com/tomarcher/archive/20.../02/615199.aspx

In the registry hack, specifically;

"9. Change ReadSpeedKBs to 1000

10. Change WriteSpeedKBs to 1000"

It doesn't do any good to change those settings at all because the flash device is still only going to do what it can do regardless of those settings in the registry. In fact, for some devices and mother boards altering those registry settings will actually cause a flash device to to use USB 1.1 instead of USB 2.0, Vista will actually give you a warning about this if you set them too low.

Edited by Spooky

ReadyBoost isn't really going to do anything for you if your installed RAm is already 1GB or more, at least you will not see much improvement. Where you really see inprovement is qith less than 1GB of RAM. Some say 1.5GB RAM (even MS said that), but in reality the difference starts to decrease at 1 GB.

Arghhh, That digg video ReadyBoostVideo got me all hyped up... I am about to reinstall Vista all over again.

Is there such a thing for XP?

ReadyBoost isn't really going to do anything for you if your installed RAm is already 1GB or more, at least you will not see much improvement. Where you really see inprovement is qith less than 1GB of RAM. Some say 1.5GB RAM (even MS said that), but in reality the difference starts to decrease at 1 GB.

I can vouch for that, my laptop has a SD card reader built in, and believe it or not my 1GB SD card was ReadyBoost capable. My laptop originally had 512MB of RAM, and ReadyBoost helped a ton and I could see the light of the card flashing a lot as it used it. I recently upgraded to 2GB of RAM for my laptop, use the same cache on the SD card, and it hardly uses it anymore. So I agree with that, over 1GB it isn't all that useful (I don't use it in my desktop, which has 4GB of RAM)

  • 3 weeks later...

thanks for your tricks and i tested it. Results on applying ReadyBoost on slow flash drive is terrible. I have 1.24GB RAM, test with kingston Datatraveler 2GB, its reading KB/S is 4350 and Writing speed is 1569. After applying, the windows itself quite lagging, literally slow response and seems like 512MB RAM only, oh hell speed i got from my thumb drive. end up disable it and let it free from ReadyBoost...

  • 3 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • how about fixing the performance?
    • No, "a great deal" for 32GB of DDR5 is $50, not $350. I mean I see what you mean, that it's a decent price compared to what's currently available, but you really should put a disclaimer in this articles explaining that it's still multiple times more expensive than it used to be.
    • Linux 7.1 stable launch looms as Linus Torvalds releases the final release candidate by Paul Hill Linus Torvalds has just released what’s expected to be the final release candidate of Linux 7.1, rc7. The Linux founder said that this RC is not small, but smaller than recent releases, which is a good sign because he expects the stable version to drop next week if things continue on this trajectory. Linux kernels see a merge window for the first two weeks of their life, where developers add new features, then there are about seven or eight weeks of release candidates before the stable version. Typically, there are seven release candidates, but if more time is needed, then an eighth release candidate is released too. This week’s RC’s biggest area of fixes was for GPUs, with networking just behind. Torvalds said that the rest of the release was “pretty random and spread out” with some architecture fixes, driver fixes, filesystem improvements, and build fixes for more unusual configs. In terms of specific pieces of hardware receiving improvements in this update, we had more AMD Zen6 models supported and fixes for AMD SDMA 7.1 and GFX11. Hardware that got improvements includes Lenovo laptops, HONOR laptops, and MSI laptops. Here are the changelogs for those: ASoC: amd: acp: Add DMI quirk for Lenovo Yoga Pro 7 15ASH11 Input: atkbd - add DMI quirk for Lenovo Yoga Air 14 (83QK) Input: atkbd - skip deactivate for HONOR BCC-N's internal keyboard ASoC: amd: yc: Add MSI Raider A18 HX A9WJG to quirk table ASoC: amd: yc: Enable internal mic on MSI Bravo 17 C7VF When the stable Linux 7.1 is released, it will be up to distribution maintainers, such as Canonical and Red Hat, to release the update to their users via the update manager. Some versions of Linux will get it before others, and some will never get it at all. Fedora and Arch-based distros will be among the first to get it, though. If you don’t get it, the security fixes will be backported to your system’s kernel, so you won’t be at risk, but you won’t get newer hardware support, which is fine if your computer works now.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      249
    3. 3
      Steven P.
      71
    4. 4
      ATLien_0
      68
    5. 5
      +Edouard
      68
  • Tell a friend

    Love Neowin? Tell a friend!