Make your Vista's admin account acts like in XP


Recommended Posts

First let me start by saying that one of the main features of Windows Vista is the new user accounts security enhancements, but sometimes, defaults don't meet everyone's taste when it comes to how we deal with our PCs. I for one, always used full administrator accounts since I first knew what a Windows user account is, and never been hit by a virus/spyware/crap, using common sense and updated AV software, so I don't want to give permissions to myself or face strange error messages every time I do a simple task on my computer.

We know UAC feature in Windows Vista, and we all know how to disable it, this is not the purpose of this thread, because even after you disable UAC, you'll have other prompts about folder/file permissions errors sometimes (I faced it in strange, unexpected occasions, like deleting an empty folder for a program left by the uninstaller), or you'll need to right click and select "Run as Administrator" for most applications to work/install correctly.

That's because Microsoft made the administrators accounts (in local administrators group) run as standard users, unless we give permissions for every and each administrative tasks, with a little difference when UAC is turned on/off

Enough introductions, lets get our hands dirty:

*************************************

Remember that cute "Administrator" account you see when you login to safe mode in XP? That's the built-in administrator account that's installed by default, and disabled by default too, after a little digging-in I made this tutorial that'll let you enable and use this account in normal mode, and with a little other tweak, enjoying an XP-like administrator experience, while UAC is left ON (or off, it doesn't matter), but with no prompts or right clicks.

For Windows Vista Ultimate/Business/Enterprise:

1- Click Start, and type "secpol.msc" in the search area and click Enter. (You may receive a prompt from UAC, approve/login and proceed)

2- In the left list, choose "Local Policies", then "Security Options"

3- Set "Accounts: Administrator account status" to Enabled.

4- Set "User Account Control: Admin Approval Mode for the Built-in Administrator account" to Disabled.

For Windows Vista Home Basic/Home Premium:

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:yes" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

3- Click Start, and type "regedit" in the search area and click Enter, navigate to: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System]

Double click on "FilterAdministratorToken" and set it to ""

*************************************

Now log-off, and you'll see new account named "Administrator" is available, click on it to login.

Now you are the master of your domain! I recommend if you're going to use this method is to apply it as soon as you do a fresh install of Windows, so you can simply delete whatever administrator you've created in the setup process, and make this one the "real" administrator for your PC, also you can rename this new admin account or change its password like any other account from "User Accounts" in the Control Panel.

A last note/disclaimer:

Please note that disabling UAC and using the built in Adminstrator account will also disable IE7 "Protected Mode", fore more information and a work around please see this post.

Please apply this procedures only if you know what you're doing. Disabling security features in the operating system is not something recommended to the average Joe, and for sure I won't be held accountable for any damaging happens to your system or files resulting from running a full administrator account all the time.

Enjoy! :)

Special thanks to:

- Farstrider for providing the location of the relevant register keys that made applying this method to the home versions of Vista possible!.

- bradavon for his comment/solution of IE7 protected mode.

Edited by Tantawi
the built in admin account, iirc, has some perms that your normal admins dont, but it also lacks some perms that your normal admins do. at least in XP it was like this....anyone confirm?

By default the administrator account does not have permission to access the files of other users if the others users are configured to make their files private (I'm basing this on my domain controller setup but I believe its the same for local accounts)

But as an administrator, you can take ownership of the files and then change the permissions.

And of course if other users encrypt their files then the admin account can't access them.

Vista appears to be the same.

You can also use gpedit.msc

secpol.msc's items are a subset of gpedit.msc

You can also adjust the settings in the registry here:

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Policies\System]

These are the main keys that affect UAC, equivalent to the secpol.msc

settings.

"ConsentPromptBehaviorAdmin"

"ConsentPromptBehaviorUser"

"EnableInstallerDetection"

"EnableLUA"

"EnableSecureUIAPaths"

"EnableVirtualization"

"PromptOnSecureDesktop"

"ValidateAdminCodeSignatures"

"FilterAdministratorToken"

You can also use gpedit.msc

secpol.msc's items are a subset of gpedit.msc

You can also adjust the settings in the registry here:

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Policies\System]

These are the main keys that affect UAC, equivalent to the secpol.msc

settings.

"ConsentPromptBehaviorAdmin"

"ConsentPromptBehaviorUser"

"EnableInstallerDetection"

"EnableLUA"

"EnableSecureUIAPaths"

"EnableVirtualization"

"PromptOnSecureDesktop"

"ValidateAdminCodeSignatures"

"FilterAdministratorToken"

maybe someone could post some reg tweaks for the above keys, so that we can just copy and paste them into notepad and save them as .reg files, would be very handy:)!

Nice work, but why would someone use the Administrator account?

I've just turned off UAC and have my own user with Administrator privileges.

That was even less work then this solution...

because of some popup messages and some programs wont even run like the bios flash utility for my hp laptop, it wont even work when you choose "run as administrator".

Suppose i use this method. I currently don't have to log onto my computer, it just boots to windows. After doing this change will i be prompted choose a user to log in with as there would be 2 users and i would then have to log in?

If it does create a log in after i deleate the old admin account will the log in process go away (assuming that i don't use a password for the new admin)?

Suppose i use this method. I currently don't have to log onto my computer, it just boots to windows. After doing this change will i be prompted choose a user to log in with as there would be 2 users and i would then have to log in?

If it does create a log in after i deleate the old admin account will the log in process go away (assuming that i don't use a password for the new admin)?

Yes, that's why I recommend to do it as soon as you install a fresh window so you don't be worried about deleting the admin account you created in the setup process :) After you delete it, you'll login automatically as long as you don't set a password of course.

You can also use gpedit.msc

secpol.msc's items are a subset of gpedit.msc

You can also adjust the settings in the registry here:

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Policies\System]

These are the main keys that affect UAC, equivalent to the secpol.msc

settings.

"ConsentPromptBehaviorAdmin"

"ConsentPromptBehaviorUser"

"EnableInstallerDetection"

"EnableLUA"

"EnableSecureUIAPaths"

"EnableVirtualization"

"PromptOnSecureDesktop"

"ValidateAdminCodeSignatures"

"FilterAdministratorToken"

Nice guide,but I can only access to this settings via registry in vista home basic.

I like to ask which one number we must past here in this lines?

), or you'll need to right click and select "Run as Administrator" for most applications to work/install correctly.

That makes absolutely no sense. There's no split token when you disable UAC via that dialog. The "Run As Administrator" option should have no effect at all.

The only time you'd have to do that would be if you disable UAC by setting admins to auto-elevate (as I suggested in another thread).

@ Brandon Live

I'm curious to know your opinion on:

Remember that cute "Administrator" account you see when you login to safe mode? That's the built-in administrator account that's installed by default, and disabled by default too, after a little digging-in I made this tutorial that'll let you enable and use this account in normal mode, and with a little other tweak, enjoying an XP-like administrator experience, while UAC is left ON (or off, it doesn't matter), but with no prompts or right clicks.

1- Click Start, and type "secpol.msc" in the search area and click Enter.

2- You may receive a prompt from UAC, approve/login and proceed.

3- In the left list, choose "Local Policies", then "Security Options"

4- Set "Accounts: Administrator account status" to Enabled.

5- Set "User Account Control: Admin Approval Mode for the Built-in Administrator account" to Disabled.

6- Now log-off, and you'll see a new account named "Administrator" will be available, click on it to login.

Now you are the master of your domain! I recommend if you're going to use this method is to apply it as soon as you do a fresh install of Windows, so you can simply delete whatever administrator you created in the setup process, and make this one the "real" administrator for your PC, also you can rename this new admin account or change its password like any other account from "User Accounts" in the Control Panel.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Dude, im talking about simply disable it from settings app. Because of the eu regulation, you could disable it here for years.
    • One big question about Mars was answered thanks to Einstein's 100 year old theory by Sayan Sen Image via DepositPhotos Scientists at the U.S. National Institute of Standards and Technology (NIST) have calculated how time passes on Mars compared with Earth, adding detail to how timekeeping would need to work beyond Earth’s orbit. The study, published in The Astronomical Journal, found that clocks on Mars run an average of 477 microseconds, or millionths of a second, faster per day than clocks on Earth. A microsecond is one millionth of a second, a very small unit used in precise scientific timing systems such as atomic clocks, which measure time using consistent atomic behavior. This difference is not constant. Because Mars moves around the Sun in a non-circular path (an eccentric orbit, meaning its distance from the Sun changes over time instead of staying fixed) and is affected by gravity from other bodies, the daily difference can vary by as much as 226 microseconds over a Martian year. The study also identifies smaller repeating changes of about 40 microseconds per day linked to synodic cycles (repeating periods that describe how planets line up with each other as they orbit the Sun from different positions). These longer patterns affect how time differences slowly rise and fall. To make these estimates, researchers compared Mars with Earth and the Moon. The work looks at relativistic proper time (the time actually measured by a clock depending on its speed and the strength of gravity where it is located, as described in Einstein’s relativity). This shows that each world has its own slightly different “rate” of time. This becomes more important as space missions expand into cislunar space (the region between Earth and the Moon) and toward Mars. On Earth, time systems rely on atomic clocks and satellites, which stay closely synchronized for navigation and communication. The study is based on Albert Einstein’s theory of relativity, which shows that time is affected by gravity and motion. Stronger gravity makes clocks run slower, while weaker gravity makes them run faster. “The time is just right for the Moon and Mars,” said NIST physicist Bijunath Patla. “This is the closest we have been to realizing the science fiction vision of expanding across the solar system.” A day on Mars is about 40 minutes longer than on Earth, and a Martian year lasts 687 Earth days. But the main question is not just about days and years, but how fast time itself passes. An atomic clock placed on Mars would function normally, but compared with one on Earth, the two would slowly drift apart due to differences in gravity and motion. This requires careful calculation of what is similar to a time-zone difference across planets. Researchers modeled Mars using a reference surface and included gravitational effects from the Sun, Earth, the Moon, and other planets. This includes a multi-body gravitational system (often described as a three-body or four-body problem, where predicting motion becomes difficult because multiple large objects all pull on each other at the same time through gravity). Mars also follows a Keplerian orbit (an idealized elliptical orbit based on simple gravitational laws that assume smooth motion, before adding real-world disturbances from other bodies). In addition, the researchers accounted for solar tides (small changes in gravitational force caused by the Sun that slightly distort planetary motion and timing, especially in systems involving Earth and the Moon). These combined effects are described as relativistic proper-time offsets (small but measurable differences in elapsed time between locations caused by gravity and motion), which must be included when comparing clocks across planets. “But for Mars, that’s not the case. Its distance from the Sun and its eccentric orbit make the variations in time larger. A three-body problem is extremely complicated. Now we’re dealing with four: the Sun, Earth, the Moon and Mars,” Patla explained. “The heavy lifting was more challenging than I initially thought.” Although the differences are extremely small, they matter for navigation and communication systems that depend on precise timing. Even modern networks on Earth, such as mobile systems, rely on timing accuracy at very small fractions of a second. Communication between Earth and Mars currently takes about four to 24 minutes or more depending on planetary positions, meaning signals are not real-time. A shared and accurate time system could help future missions reduce confusion in navigation and data exchange. “If you get synchronization, it will be almost like real-time communication without any loss of information. You don’t have to wait to see what happens,” Patla said. Researchers note that fully developed interplanetary communication networks are still far in the future. However, understanding how time behaves across planets helps prepare for those systems. “It may be decades before the surface of Mars is covered by the tracks of wandering rovers, but it is useful now to study the issues involved in establishing navigation systems on other planets and moons,” said Neil Ashby. “Like current global navigation systems like GPS, these systems will depend on accurate clocks, and the effects on clock rates can be analyzed with the help of Einstein’s general theory of relativity.” Patla added that the results also help improve understanding of time itself under relativity. “It's good to know for the first time what is happening on Mars timewise. Nobody knew that before. It improves our knowledge of the theory itself, the theory of how clocks tick and relativity,” he said. Source: NIST, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • TeraCopy 4.0 Build 26 by Razvan Serea TeraCopy is a compact program designed to copy and move files at the maximum possible speed, also providing you with a lot of features. Copy files faster. TeraCopy uses dynamically adjusted buffers to reduce seek times. Asynchronous copy speeds up file transfer between two physical hard drives. Pause and resume transfers. Pause copy process at any time to free up system resources and continue with a single click. Error recovery. In case of copy error, TeraCopy will try several times and in the worse case just skips the file, not terminating the entire transfer. Interactive file list. TeraCopy shows failed file transfers and lets you fix the problem and recopy only problem files. Shell integration. TeraCopy can completely replace Explorer copy and move functions, allowing you work with files as usual. TeraCopy is free for non-commercial use only. For commercial use you need to buy a license. The paid version of the program includes the following features: Copy/move to your favorite folders. Save reports as HTML and CSV files. Select files with the same extension/folder. Remove the selected files from the copy queue. TeraCopy 4.0 Build 26 changelog: Added support for receiving files via the LocalSend protocol. Improved exception handling and automated bug report upload. Fixed several minor bugs and small memory leaks. Build 26 (June 24) Fixed a rare exception when a transfer completed. Features added since version 3.17: Enhanced speed graph. New multi-threaded copy engine. Support for copying to multiple targets. Queue system for managing multiple copy operations. Support for receiving files via the LocalSend protocol. TeraCopy entry in the modern Windows Explorer context menu. Integrated toolbar in the title bar. Why receive LocalSend transfers with TeraCopy? Handle file conflicts: Skip, overwrite, or rename files when a file with the same name already exists. LocalSend always creates another copy, which can waste time and disk space, especially when resuming an interrupted transfer. Filter unwanted files: Apply ignore lists or remove files manually before accepting a transfer, so unnecessary files are not downloaded. Better performance on fast networks: In tests over a 10 Gbps connection, TeraCopy received files several times faster than the standard LocalSend app on Windows. Download: TeraCopy 4.0 Build 26 | 14.5 MB (Freeware, paid upgrade available) View: TeraCopy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Briefly used Turbo Pascal (and Turbo C++) in 97 and soon after that I bought PC magazine that included a full version of Delphi 2. I still use Delphi today, some 29 years later.
    • Age of Empires Mobile comes to PC, here's how to carry over progress from your phone by Ivan Jenic Image: YouTube/Microsoft Microsoft just released Age of Empires Mobile for PC. The game, officially called Age of Empires Mobile: PC Edition, is available for free on Steam and Microsoft Store, almost two years after its initial release for handheld devices. Age of Empires is one of those franchises that entire generations grew up with. The original came out in 1997, and immediately got people hooked to building civilizations and crushing their enemies on the battlefield. However, the franchise today is a far cry from its roots, as Age of Empires Mobile is, well, a game optimized for handheld devices, and not a classic RTS title we’ve all loved for years. And, of course, it includes in-game purchases. The PC version is still a mobile game at its core, but it’s been optimized for desktop play. There’s mouse control, full keyboard compatibility, and a refined UI. Microsoft also refreshed the visuals with some 4k textures, so the game should look better on larger screens. The game supports Crossplay, so you can switch between your phone, tablet, and PC without losing anything. But linked progress doesn’t come out of the box, as you have to enable it first. Here’s how to link your progress: On your mobile device, open Age of Empires Mobile. Go to Settings (Gear icon) > Account. Select Bind Account and choose a sign-in option. Once you enable account binding, sign in on PC using the same method, and your progress will be accessible across all your devices. Xbox Game Pass subscribers also get a bonus reward pack on PC, which includes: 1 Monthly Pass Token 1 Custom Resource Chest 10 Universal 60-Minute Speed-Ups 1,000 Empire Coins Exclusive Player Portrait Frame You can find more info about Age of Empires Mobile: PC Edition, as well as download links, on the Age of Empires official website.
  • Recent Achievements

    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      458
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!