Make your Vista's admin account acts like in XP


Recommended Posts

First let me start by saying that one of the main features of Windows Vista is the new user accounts security enhancements, but sometimes, defaults don't meet everyone's taste when it comes to how we deal with our PCs. I for one, always used full administrator accounts since I first knew what a Windows user account is, and never been hit by a virus/spyware/crap, using common sense and updated AV software, so I don't want to give permissions to myself or face strange error messages every time I do a simple task on my computer.

We know UAC feature in Windows Vista, and we all know how to disable it, this is not the purpose of this thread, because even after you disable UAC, you'll have other prompts about folder/file permissions errors sometimes (I faced it in strange, unexpected occasions, like deleting an empty folder for a program left by the uninstaller), or you'll need to right click and select "Run as Administrator" for most applications to work/install correctly.

That's because Microsoft made the administrators accounts (in local administrators group) run as standard users, unless we give permissions for every and each administrative tasks, with a little difference when UAC is turned on/off

Enough introductions, lets get our hands dirty:

*************************************

Remember that cute "Administrator" account you see when you login to safe mode in XP? That's the built-in administrator account that's installed by default, and disabled by default too, after a little digging-in I made this tutorial that'll let you enable and use this account in normal mode, and with a little other tweak, enjoying an XP-like administrator experience, while UAC is left ON (or off, it doesn't matter), but with no prompts or right clicks.

For Windows Vista Ultimate/Business/Enterprise:

1- Click Start, and type "secpol.msc" in the search area and click Enter. (You may receive a prompt from UAC, approve/login and proceed)

2- In the left list, choose "Local Policies", then "Security Options"

3- Set "Accounts: Administrator account status" to Enabled.

4- Set "User Account Control: Admin Approval Mode for the Built-in Administrator account" to Disabled.

For Windows Vista Home Basic/Home Premium:

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:yes" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

3- Click Start, and type "regedit" in the search area and click Enter, navigate to: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System]

Double click on "FilterAdministratorToken" and set it to ""

*************************************

Now log-off, and you'll see new account named "Administrator" is available, click on it to login.

Now you are the master of your domain! I recommend if you're going to use this method is to apply it as soon as you do a fresh install of Windows, so you can simply delete whatever administrator you've created in the setup process, and make this one the "real" administrator for your PC, also you can rename this new admin account or change its password like any other account from "User Accounts" in the Control Panel.

A last note/disclaimer:

Please note that disabling UAC and using the built in Adminstrator account will also disable IE7 "Protected Mode", fore more information and a work around please see this post.

Please apply this procedures only if you know what you're doing. Disabling security features in the operating system is not something recommended to the average Joe, and for sure I won't be held accountable for any damaging happens to your system or files resulting from running a full administrator account all the time.

Enjoy! :)

Special thanks to:

- Farstrider for providing the location of the relevant register keys that made applying this method to the home versions of Vista possible!.

- bradavon for his comment/solution of IE7 protected mode.

Edited by Tantawi
the built in admin account, iirc, has some perms that your normal admins dont, but it also lacks some perms that your normal admins do. at least in XP it was like this....anyone confirm?

By default the administrator account does not have permission to access the files of other users if the others users are configured to make their files private (I'm basing this on my domain controller setup but I believe its the same for local accounts)

But as an administrator, you can take ownership of the files and then change the permissions.

And of course if other users encrypt their files then the admin account can't access them.

Vista appears to be the same.

You can also use gpedit.msc

secpol.msc's items are a subset of gpedit.msc

You can also adjust the settings in the registry here:

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Policies\System]

These are the main keys that affect UAC, equivalent to the secpol.msc

settings.

"ConsentPromptBehaviorAdmin"

"ConsentPromptBehaviorUser"

"EnableInstallerDetection"

"EnableLUA"

"EnableSecureUIAPaths"

"EnableVirtualization"

"PromptOnSecureDesktop"

"ValidateAdminCodeSignatures"

"FilterAdministratorToken"

You can also use gpedit.msc

secpol.msc's items are a subset of gpedit.msc

You can also adjust the settings in the registry here:

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Policies\System]

These are the main keys that affect UAC, equivalent to the secpol.msc

settings.

"ConsentPromptBehaviorAdmin"

"ConsentPromptBehaviorUser"

"EnableInstallerDetection"

"EnableLUA"

"EnableSecureUIAPaths"

"EnableVirtualization"

"PromptOnSecureDesktop"

"ValidateAdminCodeSignatures"

"FilterAdministratorToken"

maybe someone could post some reg tweaks for the above keys, so that we can just copy and paste them into notepad and save them as .reg files, would be very handy:)!

Nice work, but why would someone use the Administrator account?

I've just turned off UAC and have my own user with Administrator privileges.

That was even less work then this solution...

because of some popup messages and some programs wont even run like the bios flash utility for my hp laptop, it wont even work when you choose "run as administrator".

Suppose i use this method. I currently don't have to log onto my computer, it just boots to windows. After doing this change will i be prompted choose a user to log in with as there would be 2 users and i would then have to log in?

If it does create a log in after i deleate the old admin account will the log in process go away (assuming that i don't use a password for the new admin)?

Suppose i use this method. I currently don't have to log onto my computer, it just boots to windows. After doing this change will i be prompted choose a user to log in with as there would be 2 users and i would then have to log in?

If it does create a log in after i deleate the old admin account will the log in process go away (assuming that i don't use a password for the new admin)?

Yes, that's why I recommend to do it as soon as you install a fresh window so you don't be worried about deleting the admin account you created in the setup process :) After you delete it, you'll login automatically as long as you don't set a password of course.

You can also use gpedit.msc

secpol.msc's items are a subset of gpedit.msc

You can also adjust the settings in the registry here:

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Policies\System]

These are the main keys that affect UAC, equivalent to the secpol.msc

settings.

"ConsentPromptBehaviorAdmin"

"ConsentPromptBehaviorUser"

"EnableInstallerDetection"

"EnableLUA"

"EnableSecureUIAPaths"

"EnableVirtualization"

"PromptOnSecureDesktop"

"ValidateAdminCodeSignatures"

"FilterAdministratorToken"

Nice guide,but I can only access to this settings via registry in vista home basic.

I like to ask which one number we must past here in this lines?

), or you'll need to right click and select "Run as Administrator" for most applications to work/install correctly.

That makes absolutely no sense. There's no split token when you disable UAC via that dialog. The "Run As Administrator" option should have no effect at all.

The only time you'd have to do that would be if you disable UAC by setting admins to auto-elevate (as I suggested in another thread).

@ Brandon Live

I'm curious to know your opinion on:

Remember that cute "Administrator" account you see when you login to safe mode? That's the built-in administrator account that's installed by default, and disabled by default too, after a little digging-in I made this tutorial that'll let you enable and use this account in normal mode, and with a little other tweak, enjoying an XP-like administrator experience, while UAC is left ON (or off, it doesn't matter), but with no prompts or right clicks.

1- Click Start, and type "secpol.msc" in the search area and click Enter.

2- You may receive a prompt from UAC, approve/login and proceed.

3- In the left list, choose "Local Policies", then "Security Options"

4- Set "Accounts: Administrator account status" to Enabled.

5- Set "User Account Control: Admin Approval Mode for the Built-in Administrator account" to Disabled.

6- Now log-off, and you'll see a new account named "Administrator" will be available, click on it to login.

Now you are the master of your domain! I recommend if you're going to use this method is to apply it as soon as you do a fresh install of Windows, so you can simply delete whatever administrator you created in the setup process, and make this one the "real" administrator for your PC, also you can rename this new admin account or change its password like any other account from "User Accounts" in the Control Panel.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Micron reveals AI companies are spending billions to lock up its memory years in advance by Karthik Mudaliar The demand for more memory is far from over, and Micron is turning the AI-driven memory shortage into a much more predictable business. The company has revealed that it has signed 16 strategic supply agreements backed by roughly $22 billion in customer deposits and other financial commitments. The contracts cover DRAM and NAND deliveries over several years, with some running through 2030. With the AI boom, demand for high-bandwidth memory (HBM) has grown so quickly that large customers are now prepared to help finance future production in exchange for a guaranteed supply. According to Micron’s latest financial results, the company received commitments worth about $22 billion across its new agreements. Around $18 billion is expected to arrive as cash deposits, while the rest will come through other financial arrangements. Micron says the agreements could generate approximately $100 billion in future contracted obligations. They cover around 20% of its expected DRAM shipments and one-third of its NAND shipments during their respective terms. It should be noted that although AI infrastructure is the main force behind the current shortage, not all 16 agreements with Micron involve AI companies. Micron said the customers also include consumer electronics and automotive businesses, two sectors that increasingly compete with data centers for the same manufacturing capacity. HBM is consuming an increasing share of that supply. Unlike conventional desktop or server RAM, HBM stacks multiple memory dies vertically and places them close to an AI accelerator. This gives GPUs and other AI chips access to data at much higher speeds, but it also requires more complicated manufacturing and packaging. Micron says its 12-layer HBM4 memory is now shipping in high volume for a lead customer, with samples also supplied to other companies. The chipmaker has already generated more than $1 billion in HBM4 revenue and says the product is ramping twice as quickly as its earlier HBM3E generation. Samsung has similarly warned that the memory shortage could continue into 2027 and beyond. Consumer memory companies have also had to address sharp increases in DDR5 pricing, suggesting the effects are already reaching beyond the data center. For consumers, that could mean the AI memory crunch lasts longer than expected, even as manufacturers invest heavily in new production.
    • XnConvert 1.112 by Razvan Serea  XnConvert is a cross-platform batch image-converter and resizer with a powerful and ease of use experience. All common picture and graphics formats are supported (i.e. JPG, PNG, TIFF, GIF, Camera RAW, JPEG2000, WebP, OpenEXR) as well as supporting over 500 other image formats. Also available within the batch operations include rotating, adding of watermarks, adding of text along with many image-adjustment features such as brightness, shadows and more. Among the features included are: Batch adding of files and folders Support for drag and drop of files Batch rotating, cropping, resizing and more Adding of photo masks Preserving or removing image metadata in conversions Multipage image file support (i.e animated GIF, APNG, TIFF) Command line integration via NConvert Filters - such as 'Blur', 'Gaussian Blur', 'Emboss', "Sharpen' and much more Effects - such as 'Old camera' and much more Download: XnConvert 64-bit | Standalone | ~30.0 MB (Freeware) Download: XnConvert 32-bit | Standalone Links: XnConvert Website | Screenshot | Release Announcement Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft updates Visual Studio Code with chat cost tracking and multi-agent chats by Paul Hill Microsoft has just launched Visual Studio Code 1.126, its latest weekly release. This time, the company has focused on letting you see the total cost of chat sessions to spot expensive conversations; enabling multiple chats per session that run side-by-side in one agent host Copilot session; and letting you browse new folders safely in restricted mode. We have now reached the stage where free AI in IDEs is coming to an end. To help you keep track of your costs, VS Code now lets you see the entire cost of a chat session, rather than just individual turns. This should give you more transparency about which sessions consume the most credits, so you can better manage your usage over time and spend less. For those of you using the Agents window, you know it is possible to run and manage multiple agent sessions at once. In this update, a Copilot session started from an agent host can hold several chats at once. Explaining how this feature works, Microsoft writes: Finally, from this update forward, Microsoft will remove the pop-up when opening an untrusted folder. When you open a new folder now, it will automatically open in Restricted Mode. You will see a banner that lets you manage the trust level of the folder. Microsoft has made this change so that it’s easier to start inspecting code without giving it trust right away. If you have VS Code, you can check for updates within the app now to get this new version. Otherwise, you can download it from the Visual Studio Code website.
    • Anthropic accuses Alibaba of using 25,000 fake accounts to copy Claude's capabilities by Karthik Mudaliar Anthropic has accused Alibaba of using nearly 25,000 fraudulent accounts to extract capabilities from Claude on a huge scale. According to a report from Reuters, Anthropic told US lawmakers that operators linked to Alibaba and the company’s Qwen AI team generated 28.8 million exchanges with Claude between April 22 and June 5, 2026. That is a lot of Claude conversations, but Anthropic says this was not ordinary chatbot use. The company believes the accounts were part of a coordinated effort to collect answers that could help train or improve rival AI systems. The alleged campaign reportedly focused on some of Claude’s most valuable skills, including software development, multi-step reasoning, and agentic tasks. In practical terms, that means getting an AI model to plan and complete work across several stages rather than simply answering a single question. This is called 'distillation,' where AI companies use outputs from a larger model to train a smaller and cheaper one. The smaller model learns to imitate useful parts of the more capable system without needing the same amount of computing power. The distillation process isn't automatically suspicious, but the problem comes when one company gathers another provider's outputs without permission and at an industrial scale. Also, this does not mean Alibaba obtained Claude’s source code, model weights, or original training data. Instead, Anthropic claims the accounts repeatedly asked Claude carefully designed questions and collected the answers. Those answers could then be used as training material for another model. Anthropic has made similar accusations against DeepSeek, Moonshot AI, and MiniMax earlier this year. As Neowin previously reported, Anthropic said those three companies collectively generated more than 16 million Claude exchanges through roughly 24,000 accounts. Anthropic says the new campaign produced almost twice as many exchanges in a matter of weeks. Anthropic reportedly told lawmakers that the campaign could help Chinese AI developers approach the capabilities of its Mythos Preview model. Mythos is focused on advanced cybersecurity work, including finding and exploiting complex software vulnerabilities. via Reuters | Photo via DepositPhotos.com
  • Recent Achievements

    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      175
    3. 3
      PsYcHoKiLLa
      134
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!