Make your Vista's admin account acts like in XP


Recommended Posts

Wonderful guide.

Curious though, is there any way to remove the "run as administrator" function on context menus, since there's no longer any use for it(Or is there)?

If It involves resource hacking, it doesn't matter. I want to leave my Vista 'un-hacked'. >.>

@bradavon: I still can't figure out how to do that too. I added the bit about IE7 to the first post, I didn't notice it since I don't use IE :D thanks a lot.

@neospyce: Thanks for the link!

@Sniper101 & jamesyfx: You're welcome! :) I don't think there's a way to remove "Run as admin", but if you found a way let us know ;)

Wonderful guide.

Curious though, is there any way to remove the "run as administrator" function on context menus, since there's no longer any use for it(Or is there)?

If It involves resource hacking, it doesn't matter. I want to leave my Vista 'un-hacked'. >.>

Merge "RunAsAdmin_Exe-.reg" to remove the "Run as Administrator" Context Menu Item from all exe files.

Merge "RunAsAdmin_Exe+.reg" if you want to restore the "Run as Administrator" Context Menu Item.

RunAsAdmin.zip

I created these regfiles for the Take Ownership Context Menu Item.

? ? TakeOwn.png

More info @ Vista - Tips, Tricks & Tweaks:):)

Merge "RunAsAdmin_Exe-.reg" to remove the "Run as Administrator" Context Menu Item from all exe files.

Merge "RunAsAdmin_Exe+.reg" if you want to restore the "Run as Administrator" Context Menu Item.

RunAsAdmin.zip

I created these regfiles for the Take Ownership Context Menu Item.

TakeOwn.png

More info @ Vista - Tips, Tricks & Tweaks. :)

Sweet.

Heres a nice little tool:

http://www.tweak-uac.com/

  • 2 weeks later...
  • 3 weeks later...
@bradavon: I still can't figure out how to do that too. I added the bit about IE7 to the first post, I didn't notice it since I don't use IE :D thanks a lot.

No worries, glad I could help. If you like you can delete my ramblings above the main point of my post. The important part is when I discuss DropMyRights.

I too don't use IE but on occasion you have to when the site isn't FF compatible, or the you come across the odd site that uses ActiveX.

Is there a way to REVERSE this ?

I must admit, I've rarely used the "Administrator" log in, and only then by accident.

I'd like to go straight to my Phil K account.

How do I get shot of this ?

Yes there's!

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:no" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

Reboot and it'll go to the active account directly :)

Welcome everyone.

Yes there's!

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:no" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

Reboot and it'll go to the active account directly :)

Welcome everyone.

Cool. New little bit there.

Yes there's!

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:no" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

Reboot and it'll go to the active account directly :)

Welcome everyone.

Worked beautifully.

Thanks !

  • 1 month later...
maybe someone could post some reg tweaks for the above keys, so that we can just copy and paste them into notepad and save them as .reg files, would be very handy:)!

I know that the point of this tutorial is to move the annoying messages that warn you about almost every top level action you attempt, but after careful consideration, I think it's a good idea to be warned. Windows XP (mostly before SP2), was a completely in-secure file system with regards to administrative permissions. User accounts in both the Home and Professional editions of Windows XP were by default given administrative permissions over the system they presided in.

I think Microsoft has made a smart move by ensuring that users aren't able to harm them-selves. I understand there are those of you out there who are obviously careful and cautious enough to be able to take care of yourselves, but the majority is often the dumber fraction. ;)

  • 1 month later...
  • 3 weeks later...

Hey :)

This doesnt seem to work very well. Everytime I try to copy and then paste something in Program Files it never allows me even if I say yes to the UAC prompt. While in my original admin account when I installed Vista, I could.

Why?

  • 8 months later...
Hello Tantawi, thanks for the welcome.

Thanks for that reg fix. It looks like it adds a context menu which dumps you at a DOS command prompt. It's a start but I'd prefer a Full Admin account like XP.

Even if I didn't use it all the time it would be nice to know it's possible. For example I've not worked out how to be able to rename files in the WINDOWS\SYSTEM32 folder (unless I take ownership of that too) which you may need to do if you need to delete/rename a system file.

Has anyone worked how to do this? Surely it's possible. I believe the difference here is the Administrator account (the proper one) in Vista still doesn't own certain folders, they're owned by the SYSTEM account (which cannot logged in with) as opposed XP where you own each and every folder.

That thread is great though, it's chocker block with goodies. I'll have to get reading :D

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Can I suggest you add a disclaimer to your first post explaining disabling UAC takes Vista's IE7 Protected Mode with it.

This basically lowers IE7 to a Limited User (lower than the Semi-Admin you're logged in with). This is something IE7 users may not be aware of, even if you enable Protected Mode from Internet Options it stays disabled (just like UAC). There is a fix however.

If you want UAC disabled but Protected Mode on use DropMyRights which was written for XP but works just the same in Vista (I tested it last night), not only that but using it actually turns Protected Mode back on (i.e - instead of saying Protected Mode: Off it will say On). Therefore proving Protected Mode and DropMyRights are on and the same thing.

What is DropMyRights I hear you say, read on: http://msdn2.microsoft.com/en-us/library/ms972827.aspx

It was written by a Microsoft bloke but isn't officially supported. I use the /c switch to make it even more secure. I've been using it for months and bar ActiveX installs (which need admin rights) not one website has fallen over. You can prove it works by trying to save a file into the SYSTEM32 folder, it won't let you.

The great thing is it's completely seamless, works on XP or Vista (probably 2000 too) and lets you get the good bits out of UAC without the bad. Just set the shortcut for each Internet enabled program to use it and make sure you choose Open "Minimised" and it's seamless.

I tried this but it always gives me a invalid path....

it says C:\programs doesnt exist.

  • 2 weeks later...

yeah currently I use a real admin account with no UAC at all however I think UAC is a good idea as it follows the unix motto of trying to keep things running in limited priviledge mode. So I do plan at some point to move back to a UAC environment on my vista box and work around the non admin mode problems I had.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • We had no idea as kids how much time and energy it took to be an adult 😅
    • The Trump administration doesn't want you to use OpenAI's GPT-5.6 without its approval by David Uzondu Image via @realDonalTrump (X) As OpenAI prepares the release of its next model, GPT 5.6, the White House has instructed the company to limit the distribution of the software to a small group of government-approved partners instead of the general public, as it has done with previous releases. According to The Information, OpenAI Chief Executive Officer Sam Altman sent an internal memo to staff on Thursday explaining that the federal government will approve access "customer by customer" during an initial preview phase. Altman noted in the communication that this restrictive rollout is "not [their] long-term model" for software deployment, and the company plans to work toward a "more sustainable" distribution method later. CNN said that both OpenAI and the Trump administration view the capabilities of GPT 5.6 on the same level as Anthropic's Mythos and that government officials intend to "collaborate with frontier AI labs to develop shared approaches for addressing the challenges of scaling this technology." The latest restriction comes just weeks after the US Commerce Department decided to restrict Fable, a version of Mythos with extra safety "guardrails" to prevent users from exploiting software vulnerabilities. Not long after the release, though, researchers at Amazon found a way to bypass these restrictions, prompting an aggressive response from federal authorities. The government ordered Anthropic to cut off access for non-US citizens located outside the US, non-US citizens living inside the US, and incredibly, even Anthropic's own foreign-born employees. Anthropic now appears to be building a workaround to resolve this compliance block with an update to its Privacy Policy that introduces a category called "Verification Data" to handle KYC and Digital IDs. This setup could mandate digital identity checks to filter users by nationality, requiring a government-issued ID and facial biometric data. Who knows? Maybe in the future, you would have to scan your US Passport or State ID to prove your citizenship before you are allowed to chat with Fable 5 (or any other model).
    • When Windows 7 was released I created an AutoHotkey script that uses Alt+` as a keyboard shortcut to move a window across monitors. I have been using that script for over 15 years and this is the first time I have come across another app that uses the same shortcut!
  • Recent Achievements

    • Week One Done
      xvvxcvv earned a badge
      Week One Done
    • One Month Later
      xvvxcvv earned a badge
      One Month Later
    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      403
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      127
    4. 4
      neufuse
      69
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!