Make your Vista's admin account acts like in XP


Recommended Posts

Wonderful guide.

Curious though, is there any way to remove the "run as administrator" function on context menus, since there's no longer any use for it(Or is there)?

If It involves resource hacking, it doesn't matter. I want to leave my Vista 'un-hacked'. >.>

@bradavon: I still can't figure out how to do that too. I added the bit about IE7 to the first post, I didn't notice it since I don't use IE :D thanks a lot.

@neospyce: Thanks for the link!

@Sniper101 & jamesyfx: You're welcome! :) I don't think there's a way to remove "Run as admin", but if you found a way let us know ;)

Wonderful guide.

Curious though, is there any way to remove the "run as administrator" function on context menus, since there's no longer any use for it(Or is there)?

If It involves resource hacking, it doesn't matter. I want to leave my Vista 'un-hacked'. >.>

Merge "RunAsAdmin_Exe-.reg" to remove the "Run as Administrator" Context Menu Item from all exe files.

Merge "RunAsAdmin_Exe+.reg" if you want to restore the "Run as Administrator" Context Menu Item.

RunAsAdmin.zip

I created these regfiles for the Take Ownership Context Menu Item.

? ? TakeOwn.png

More info @ Vista - Tips, Tricks & Tweaks:):)

Merge "RunAsAdmin_Exe-.reg" to remove the "Run as Administrator" Context Menu Item from all exe files.

Merge "RunAsAdmin_Exe+.reg" if you want to restore the "Run as Administrator" Context Menu Item.

RunAsAdmin.zip

I created these regfiles for the Take Ownership Context Menu Item.

TakeOwn.png

More info @ Vista - Tips, Tricks & Tweaks. :)

Sweet.

Heres a nice little tool:

http://www.tweak-uac.com/

  • 2 weeks later...
  • 3 weeks later...
@bradavon: I still can't figure out how to do that too. I added the bit about IE7 to the first post, I didn't notice it since I don't use IE :D thanks a lot.

No worries, glad I could help. If you like you can delete my ramblings above the main point of my post. The important part is when I discuss DropMyRights.

I too don't use IE but on occasion you have to when the site isn't FF compatible, or the you come across the odd site that uses ActiveX.

Is there a way to REVERSE this ?

I must admit, I've rarely used the "Administrator" log in, and only then by accident.

I'd like to go straight to my Phil K account.

How do I get shot of this ?

Yes there's!

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:no" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

Reboot and it'll go to the active account directly :)

Welcome everyone.

Yes there's!

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:no" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

Reboot and it'll go to the active account directly :)

Welcome everyone.

Cool. New little bit there.

Yes there's!

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:no" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

Reboot and it'll go to the active account directly :)

Welcome everyone.

Worked beautifully.

Thanks !

  • 1 month later...
maybe someone could post some reg tweaks for the above keys, so that we can just copy and paste them into notepad and save them as .reg files, would be very handy:)!

I know that the point of this tutorial is to move the annoying messages that warn you about almost every top level action you attempt, but after careful consideration, I think it's a good idea to be warned. Windows XP (mostly before SP2), was a completely in-secure file system with regards to administrative permissions. User accounts in both the Home and Professional editions of Windows XP were by default given administrative permissions over the system they presided in.

I think Microsoft has made a smart move by ensuring that users aren't able to harm them-selves. I understand there are those of you out there who are obviously careful and cautious enough to be able to take care of yourselves, but the majority is often the dumber fraction. ;)

  • 1 month later...
  • 3 weeks later...

Hey :)

This doesnt seem to work very well. Everytime I try to copy and then paste something in Program Files it never allows me even if I say yes to the UAC prompt. While in my original admin account when I installed Vista, I could.

Why?

  • 8 months later...
Hello Tantawi, thanks for the welcome.

Thanks for that reg fix. It looks like it adds a context menu which dumps you at a DOS command prompt. It's a start but I'd prefer a Full Admin account like XP.

Even if I didn't use it all the time it would be nice to know it's possible. For example I've not worked out how to be able to rename files in the WINDOWS\SYSTEM32 folder (unless I take ownership of that too) which you may need to do if you need to delete/rename a system file.

Has anyone worked how to do this? Surely it's possible. I believe the difference here is the Administrator account (the proper one) in Vista still doesn't own certain folders, they're owned by the SYSTEM account (which cannot logged in with) as opposed XP where you own each and every folder.

That thread is great though, it's chocker block with goodies. I'll have to get reading :D

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Can I suggest you add a disclaimer to your first post explaining disabling UAC takes Vista's IE7 Protected Mode with it.

This basically lowers IE7 to a Limited User (lower than the Semi-Admin you're logged in with). This is something IE7 users may not be aware of, even if you enable Protected Mode from Internet Options it stays disabled (just like UAC). There is a fix however.

If you want UAC disabled but Protected Mode on use DropMyRights which was written for XP but works just the same in Vista (I tested it last night), not only that but using it actually turns Protected Mode back on (i.e - instead of saying Protected Mode: Off it will say On). Therefore proving Protected Mode and DropMyRights are on and the same thing.

What is DropMyRights I hear you say, read on: http://msdn2.microsoft.com/en-us/library/ms972827.aspx

It was written by a Microsoft bloke but isn't officially supported. I use the /c switch to make it even more secure. I've been using it for months and bar ActiveX installs (which need admin rights) not one website has fallen over. You can prove it works by trying to save a file into the SYSTEM32 folder, it won't let you.

The great thing is it's completely seamless, works on XP or Vista (probably 2000 too) and lets you get the good bits out of UAC without the bad. Just set the shortcut for each Internet enabled program to use it and make sure you choose Open "Minimised" and it's seamless.

I tried this but it always gives me a invalid path....

it says C:\programs doesnt exist.

  • 2 weeks later...

yeah currently I use a real admin account with no UAC at all however I think UAC is a good idea as it follows the unix motto of trying to keep things running in limited priviledge mode. So I do plan at some point to move back to a UAC environment on my vista box and work around the non admin mode problems I had.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Movavi Video Editor Plus 26.18.0 by Razvan Serea With Movavi Video Editor Plus, you can either enhance your video files with two or three simple steps, or turn them into something completely new. Create your own movies using multiple filters, transitions, and special effects: show multiple videos on one screen with the Picture in picture effect or change the background with the Chroma Key effect, imitate the camera zoom or make your video look like an old-style movie. Adjust video parameters such as brightness, contrast and colors. Stabilize shaky footage, improve video quality and remove defects. Create video presentations, tutorials or educational videos: add titles and record your own narration to create a video with voiceover. Import video from any source: TV-tuner, webcam, camcorder, or VHS. Drop multiple media files onto a timeline and let your imagination do the rest! Features at a glance: Video and audio editing on a timeline Edit, enhance videos Add background music Apply titles and effects Image quality improvement Hollywood-worthy effects High-grade titles and fades Digitize VHS tapes, record video from TV tuners Stabilize any shaky sections Support for a wide range of formats Prepare your videos for uploading to YouTube, Facebook, Vimeo, or any other website New in Movavi Video Editor 2026: 30+ fresh subtitle styles. Upgrade your automatic captions with new designs. Customize your text in the Styles tab with a single click. Optional advanced settings are also available in the dedicated Design tab. Subtitles in English – instantly! Translate auto-subtitles into English with a click – no dictionaries or online services needed. Once translated, configure and fine-tune the subtitles using the standard editing tools. 40+ adjustable effects. Enhance your videos in a click with new realistic effects – from dust particles and light leaks to retro-style and VHS. Every effect is fully customizable – so it will fit any clip perfectly and bring an extra spark to your edits. Ultra-fast playback. Show more in less time with video speed control of up to 100x. Perfect for epic time-lapses, long process recaps, or whenever you want to add some extra energy to your content. Magnetic zones are marked with dots, and the 1x value is indicated by a vertical line. Silence removal – in a click. Cut out unwanted pauses automatically or fine-tune the pause length and volume threshold yourself. Skip the tedious cleanup and make your videos more dynamic. Fast effect copying. Effortlessly duplicate any effect from one video to another: click Clip effects in the dropdown menu and proceed to copy or paste. Movavi Video Editor Plus 26.18.0 changes: This version includes small improvements for better editing. Download: Movavi Video Editor Plus 26.18.0 | 2.7 MB (Shareware) View: Movavi Video Editor Plus Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • JBL BAR 800 5.1.2 Dolby Atmos soundbar is an amazing deal today by Sayan Sen This Amazon Prime Day 2026 sales so far we have had a couple of nice deals related to sound and audio. First we have the Sennheiser HD 600 at its lowest ever price of just $225. Next we also have the Beats Studio Pro at its lowest price ever at just $150. However perhaps you prefer your gear to sound great on a larger scale, like throughout the room. In that case an all-in-one soundbar system can help and currently JBL's BAR 800 is a great deal for sure as it's up for grabs at just $600 (purchase link under the specs table down below). One thing that should be appreciated a lot about these JBL soundbars is their spec sheet and the frequency response data it provides. The firm is honest about it as JBL confirms the subwoofer is able to go down to 35 Hz at -6dB or F6. This means it should be covering 40Hz and up very well, where most of the bass lies. You miss out on a lot of sub-bass but that is to be expected given the price point and the subwoofer driver size. Speaking of which, it is a 10-inch driver and promises a max output power of 300 watts at 1% THD (total harmonic distortion). JBL also claims the system will provide you with a "True Dolby Atmos" experience. The surround speakers are wireless and battery-powered which means setting them up should be really convenient. The technical specs of the JBL BAR 800 are given in the table below: Specification Value Channel Configuration 5.1.2-channel soundbar system Dolby Atmos Yes, with 2 up-firing drivers Total System Power Output 720 W Soundbar Power Output 340 W Surround Speaker Power Output 2 × 40 W Subwoofer Power Output 300 W Soundbar Drivers 3 × 46×90 mm racetrack drivers, 3 × 20 mm tweeters, 2 × 70 mm up-firing full-range drivers Surround Speaker Drivers 1 × 46×90 mm racetrack driver (each speaker) Subwoofer Driver 10-inch (260 mm) wireless subwoofer Frequency Response 35 Hz – 20 kHz (-6 dB) Audio Inputs Optical, Bluetooth, Chromecast built-in, AirPlay, Alexa Multi-Room Music (MRM), USB* HDMI Inputs 1 HDMI video input HDMI Output 1 HDMI eARC output HDCP Version 2.3 HDR Pass-Through HDR10, Dolby Vision Bluetooth Version 5.0 Wi-Fi Version 6, 6E Streaming Services Chromecast built-in, Apple AirPlay, Alexa MRM Get it at the link below: JBL Bar 800-5.1.2-Channel Dolby Atmos soundbar with Detachable Surround Speakers (Black): $599.85 (Sold and Shipped by Amazon US with Prime) Prime subscription can be cancelled within three business days. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Microsoft releases PowerToys v0.100.1, fixes a bug that made remapped keys misbehave by Ivan Jenic Microsoft just released PowerToys v0.100.1, a patch update that addresses several stability and behavior issues found in v0.100.0. The v0.100.0 patch was a significant update for PowerToys, as it introduced all sorts of new features and additions, such as a rebuilt Shortcut Guide, a Command Palette Extension Gallery, webcam overlay support in ZoomIt, and more. However, the v0.100.0 version also introduced some bugs and stability issues. And now, Microsoft is addressing these issues in the new patch. The most impactful fix in this release perhaps is in Keyboard Manager, where remapped modifier keys were being delivered as system-key events, causing unexpected behavior in apps. The clearest example of this was Alt-to-Backspace remaps, deleting whole words instead of a single character. So, if you thought there was an issue with your keyboard, Microsoft just confirmed that it was PowerToys. Beyond the Keyboard Manager fix, v0.100.1 also addresses several other issues. It fixes a bug with Power Display that was preventing monitors from waking from standby correctly. Additionally, the new update patches Quick Access crashes on launch, and resolves a Shortcut Guide crash that occurred when switching between sidebar sections. Here’s the full changelog: Color Picker Fixed a bug where the main Color Picker window could appear inside the zoomed-in picker view Command Palette Fixed Run history initialization in AOT builds Fixed a bug where the Performance Monitor dock item could show ??? after restart Fixed the Hibernate command using the Sleep icon Limited the "pin to dock" dialog to displays where the dock is enabled Keyboard Manager Fixed modifier keys remapped to non-modifier keys being delivered as system-key events, which caused unexpected behavior in apps such as Alt-to-Backspace deleting whole words Power Display Fixed a bug where selecting On in the monitor power-state control did not wake a monitor from standby Fixed built-in display detection and brightness control on dual-GPU laptops where the internal panel is driven by the discrete GPU PowerToys Run Fixed VS Code Workspaces discovery after VS Code moved recently opened workspace data to shared storage Quick Access Fixed Quick Access flyout crashes caused by unhandled XAML exceptions during launch or page navigation Shortcut Guide Fixed a crash when navigating between Shortcut Guide sidebar sections Fixed number-key rendering in shortcut manifests and added a Postman shortcut manifest Updated bundled shortcut manifests to use the literal number-key token so number keys render correctly across apps ZoomIt Fixed a race condition in audio initialization for ZoomIt video recording You can download PowerToys v0.100.1 from the official GitHub releases page.
    • OBS Studio 32.2.0 Beta 2 by Razvan Serea OBS Studio is software designed for capturing, compositing, encoding, recording, and streaming video content, efficiently. It is the re-write of the widely used Open Broadcaster Software, to allow even more features and multi-platform support. OBS Studio supports multiple sources, including media files, games, web pages, application windows, webcams, your desktop, microphone and more. OBS Studio Features: High performance real time video/audio capturing and mixing, with unlimited scenes you can switch between seamlessly via custom transitions. Live streaming to Twitch, YouTube, Periscope, Mixer, GoodGame, DailyMotion, Hitbox, VK and any other RTMP server Filters for video sources such as image masking, color correction, chroma/color keying, and more. x264, H.264 and AAC for your live streams and video recordings Intel Quick Sync Video (QSV) and NVIDIA NVENC support Intuitive audio mixer with per-source filters such as noise gate, noise suppression, and gain. Take full control with VST plugin support. GPU-based game capture for high performance game streaming Unlimited number of scenes and sources Number of different and customizable transitions for when you switch between scenes Hotkeys for almost any action such as start or stop your stream or recording, push-to-talk, fast mute of any audio source, show or hide any video source, switch between scenes,and much more Live preview of any changes on your scenes and sources using Studio Mode before pushing them to your stream where your viewers will see those changes DirectShow capture device support (webcams, capture cards, etc) Powerful and easy to use configuration options. Add new Sources, duplicate existing ones, and adjust their properties effortlessly. Streamlined Settings panel for quickly configuring your broadcasts and recordings. Switch between different profiles with ease. Light and dark themes available to fit your environment. …and many other features. For free. At all. OBS Studio 32.2.0 Beta 2 changelog: Beta 2 Changes Fixed a CI deployment issue. There are no application changes since Beta 1. 32.2 New Features Replaced add source dropdown with new dialog [Warchamp7] Improved FPS selector UX [jcm93] Added missing file support for filters [exeldro] Added ability for plugins to set custom icons for new source types [cg2121] Included .webp files when adding a directory to Image Slide Show source [TarunCore] Added copy paste functions to frontend API [exeldro] Added filter to compose SDR into HDR [jpark37] Added delete as a hotkey to delete sources on macOS [PatTheMav] Added dynamic bitrate support to multitrack video [lexano-ivs] 32.2 Changes Forced Intel-based installations to update to Apple Silicon version on macOS [PatTheMav] This change means that OBS Studio versions built for Intel-based Macs but running on Apple Silicon Macs will automatically update to OBS Studio built for Apple Silicon Macs. If an installation was using third-party plugins, those plugins will no longer load until replaced with Apple Silicon versions. Fixed audio mixer state getting out of sync when changing settings via websockets or plugins [Warchamp7] Added theming for checked QToolButtons [glikely] Improved OpenGL performance slightly on low-end machines [kkartaltepe] Set minimum size for color source to 1 pixel [exeldro] Added minimum width to spinboxes [Warchamp7] Disallowed overwriting the crash handler [sebastian-s-beckmann] Applied process mitigation policies for Windows [notr1ch] Adjusted description of multitrack video [jhnbwrs] Changed new capture devices to use fallback frame rate by default [PatTheMav] Improved DLL loading behavior on Windows [notr1ch] Limited multitrack video config to Custom service [PatTheMav] 32.2 Bug Fixes Fixed OAuth and dock state save corruption [PatTheMav] Fixed group bounds not resizing when removing items [howellrl] Fixed canvas mixes not being restored after video reset [dsaedtler] Fixed some erroneous crashes during shutdown [Warchamp7] Fixed display capture sometimes capturing black after a duplicator failure [ThrowTop] Fixed color of controls dock output buttons in System theme [shiina424] Fixed virtual camera reset failures [stephematician] Fixed potential crash when user discards changes in the settings window [suogesi] Fixed incorrect return value in virtualcam filter [xtfo] Fixed source toolbar buttons not working after dragging a source into a group [Warchamp7] Fixed properties hint icon spacing [Warchamp7] Fixed potential crash when a video device reconnects on macOS [jcm93] Fixed an issue where PipeWire could fail on NVIDIA GPUs [hoshinolina] Fixed obs_canvas_get_video_info returning incorrect framerate [dsaedtler] 32.2 Deprecations Deprecated obs_properties_add_button [sebastian-s-beckmann] Download: OBS Studio 32.2.0 Beta 2 | Portable | ARM64 | ~200.0 MB (Open Source) View: OBS Studio Homepage | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Is a fast food restaurant a good metric to compare against?
  • Recent Achievements

    • One Year In
      OHI Accounting earned a badge
      One Year In
    • First Post
      Almohandis earned a badge
      First Post
    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      474
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      122
    4. 4
      Michael Scrip
      83
    5. 5
      Xenon
      72
  • Tell a friend

    Love Neowin? Tell a friend!