Make your Vista's admin account acts like in XP


Recommended Posts

Wonderful guide.

Curious though, is there any way to remove the "run as administrator" function on context menus, since there's no longer any use for it(Or is there)?

If It involves resource hacking, it doesn't matter. I want to leave my Vista 'un-hacked'. >.>

@bradavon: I still can't figure out how to do that too. I added the bit about IE7 to the first post, I didn't notice it since I don't use IE :D thanks a lot.

@neospyce: Thanks for the link!

@Sniper101 & jamesyfx: You're welcome! :) I don't think there's a way to remove "Run as admin", but if you found a way let us know ;)

Wonderful guide.

Curious though, is there any way to remove the "run as administrator" function on context menus, since there's no longer any use for it(Or is there)?

If It involves resource hacking, it doesn't matter. I want to leave my Vista 'un-hacked'. >.>

Merge "RunAsAdmin_Exe-.reg" to remove the "Run as Administrator" Context Menu Item from all exe files.

Merge "RunAsAdmin_Exe+.reg" if you want to restore the "Run as Administrator" Context Menu Item.

RunAsAdmin.zip

I created these regfiles for the Take Ownership Context Menu Item.

? ? TakeOwn.png

More info @ Vista - Tips, Tricks & Tweaks:):)

Merge "RunAsAdmin_Exe-.reg" to remove the "Run as Administrator" Context Menu Item from all exe files.

Merge "RunAsAdmin_Exe+.reg" if you want to restore the "Run as Administrator" Context Menu Item.

RunAsAdmin.zip

I created these regfiles for the Take Ownership Context Menu Item.

TakeOwn.png

More info @ Vista - Tips, Tricks & Tweaks. :)

Sweet.

Heres a nice little tool:

http://www.tweak-uac.com/

  • 2 weeks later...
  • 3 weeks later...
@bradavon: I still can't figure out how to do that too. I added the bit about IE7 to the first post, I didn't notice it since I don't use IE :D thanks a lot.

No worries, glad I could help. If you like you can delete my ramblings above the main point of my post. The important part is when I discuss DropMyRights.

I too don't use IE but on occasion you have to when the site isn't FF compatible, or the you come across the odd site that uses ActiveX.

Is there a way to REVERSE this ?

I must admit, I've rarely used the "Administrator" log in, and only then by accident.

I'd like to go straight to my Phil K account.

How do I get shot of this ?

Yes there's!

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:no" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

Reboot and it'll go to the active account directly :)

Welcome everyone.

Yes there's!

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:no" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

Reboot and it'll go to the active account directly :)

Welcome everyone.

Cool. New little bit there.

Yes there's!

1- Click Start, and type "cmd" in the search area, right click on "Command Prompt" and select 'Run as Administrator".

2- In the command prompt type "net users Administrator /active:no" (Note the capital "A" in Administrator) and press Enter, you will get a confirmation as "The command completed successfully".

Reboot and it'll go to the active account directly :)

Welcome everyone.

Worked beautifully.

Thanks !

  • 1 month later...
maybe someone could post some reg tweaks for the above keys, so that we can just copy and paste them into notepad and save them as .reg files, would be very handy:)!

I know that the point of this tutorial is to move the annoying messages that warn you about almost every top level action you attempt, but after careful consideration, I think it's a good idea to be warned. Windows XP (mostly before SP2), was a completely in-secure file system with regards to administrative permissions. User accounts in both the Home and Professional editions of Windows XP were by default given administrative permissions over the system they presided in.

I think Microsoft has made a smart move by ensuring that users aren't able to harm them-selves. I understand there are those of you out there who are obviously careful and cautious enough to be able to take care of yourselves, but the majority is often the dumber fraction. ;)

  • 1 month later...
  • 3 weeks later...

Hey :)

This doesnt seem to work very well. Everytime I try to copy and then paste something in Program Files it never allows me even if I say yes to the UAC prompt. While in my original admin account when I installed Vista, I could.

Why?

  • 8 months later...
Hello Tantawi, thanks for the welcome.

Thanks for that reg fix. It looks like it adds a context menu which dumps you at a DOS command prompt. It's a start but I'd prefer a Full Admin account like XP.

Even if I didn't use it all the time it would be nice to know it's possible. For example I've not worked out how to be able to rename files in the WINDOWS\SYSTEM32 folder (unless I take ownership of that too) which you may need to do if you need to delete/rename a system file.

Has anyone worked how to do this? Surely it's possible. I believe the difference here is the Administrator account (the proper one) in Vista still doesn't own certain folders, they're owned by the SYSTEM account (which cannot logged in with) as opposed XP where you own each and every folder.

That thread is great though, it's chocker block with goodies. I'll have to get reading :D

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Can I suggest you add a disclaimer to your first post explaining disabling UAC takes Vista's IE7 Protected Mode with it.

This basically lowers IE7 to a Limited User (lower than the Semi-Admin you're logged in with). This is something IE7 users may not be aware of, even if you enable Protected Mode from Internet Options it stays disabled (just like UAC). There is a fix however.

If you want UAC disabled but Protected Mode on use DropMyRights which was written for XP but works just the same in Vista (I tested it last night), not only that but using it actually turns Protected Mode back on (i.e - instead of saying Protected Mode: Off it will say On). Therefore proving Protected Mode and DropMyRights are on and the same thing.

What is DropMyRights I hear you say, read on: http://msdn2.microsoft.com/en-us/library/ms972827.aspx

It was written by a Microsoft bloke but isn't officially supported. I use the /c switch to make it even more secure. I've been using it for months and bar ActiveX installs (which need admin rights) not one website has fallen over. You can prove it works by trying to save a file into the SYSTEM32 folder, it won't let you.

The great thing is it's completely seamless, works on XP or Vista (probably 2000 too) and lets you get the good bits out of UAC without the bad. Just set the shortcut for each Internet enabled program to use it and make sure you choose Open "Minimised" and it's seamless.

I tried this but it always gives me a invalid path....

it says C:\programs doesnt exist.

  • 2 weeks later...

yeah currently I use a real admin account with no UAC at all however I think UAC is a good idea as it follows the unix motto of trying to keep things running in limited priviledge mode. So I do plan at some point to move back to a UAC environment on my vista box and work around the non admin mode problems I had.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Rufus alternative Ventoy now supports Windows 11's mandatory update, fixes major boot bug by Sayan Sen While Microsoft has its own official Media Creation Tool used for making bootable USB media, there are some popular third-party utilities as well which offer additional options like bypassing system requirements, Microsoft Account creation, and more. One of these is Ventoy, and the software has received its latest update today. In fact, the app actually got a slew of updates over the last couple of days, three version releases in total, to be specific. The first release, version 1.1.13, was pulled as there was some unspecified error in the update, and as such, the corrected version 1.1.14 was pushed out. Following that on very short notice, 1.1.15 was published as well. For those unfamiliar, Ventoy is an open-source utility that lets users create a bootable USB drive once and then simply copy ISO, WIM, IMG, VHD, or EFI files onto it without repeatedly formatting the drive. It supports both legacy BIOS and UEFI boot modes, Secure Boot, and a wide range of operating systems, making it one of the most versatile tools in the category. The biggest change in version 1.1.14 is an updated Secure Boot shim file aimed at resolving the UEFI CA 2023 issue, which is basically a compatibility problem that has affected Secure Boot environments on some systems. If you recall, we reported about severe boot issues on HP devices following the release of updated Secure Boot 2023 keys. For anyone who may not be aware, back in early 2024, Microsoft announced that it was updating Secure Boot keys as they were going to become 15 years old in 2026, which is also when they are set to expire. As such, the new 2023 certificates have been rolling out with the newest Windows 11 updates. Updated boot manager and Secure Boot certificates are crucial for protection against malware like bootkits. These are mandatory updates. Alongside that, the VentoyPlugson graphical plugin configurator was updated in sync with the release. The update also introduces a new VTOY_SECURE_BOOT_POLICY option within the Global Control plugin, giving users more flexibility in managing Secure Boot behavior. Ventoy has also received a fix for a startup issue when Secure Boot was disabled. Microsoft does officially allow users to boot systems without Secure Boot as long as the PC is Secure Boot capable. The full changelog is given below: Update secure boot shim file to solve the UEFI CA 2023 issue. The new release use a new CA, so you need to enroll the new key for the first boot time. VentoyPlugson update synchronously. Global control plugin add a VTOY_SECURE_BOOT_POLICY option. Fix the boot issue when Secure Boot is disabled in the UEFI firmware. You can download the latest version of the app here on Ventoy's official GitHub repo or from Neowin software stories.
    • Windows 11 is fine, no issues on any of the machines I've run it on since release. The stricter security requirements are a good thing, sometimes the baseline needs to change and people will winge, but it is what it is. Happened with the move from 9x to NT - broke compatability Happened with XP SP2 when security started to become a serious consideration Certainly happend with Vista that brought in UAC, the concept of not running as admin (something that has been the norm in Linux/Unix from pretty much the start) and a completely new driver stack. Windows 11 will probably get looked back at as the point where even consumer and SMB IT was dragged kicking and screaming into a somewhat secure by default configuration.
    • Bluestacks has been emulating Android on Windows for fifteen years. It's janky and riddled with ads though, so WSA looked like it was going to be a huge improvement over the emulator experience. Too bad Microsoft dropped the ball on that.
    • Classic. China would be nothing without Western, Japanese, and South Korean technology.
    • The world is larger then your small viewpoint. Plenty of scientists care about this, especially those involved in space.
  • Recent Achievements

    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      134
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!